Latest flap valves Tenders | Government flap valves Tenders

State Government

CTN :45732621

02 Jul, 2026 47.2 Thousand

Pinjore - Haryana

Tender For bhoj dharti,bhoj darara,bhoj mataur, group of 3 no. of habitations annual mtc.works for water supply - fixing of c.i. valves hydrants, fixing sluice valves/flap valves socketed or flanged, providing and fixing cast iron double flanged swing check type reflux (non return) valves

State Government

CTN :45732637

02 Jul, 2026 49.2 Thousand

Pinjore - Haryana

Tender For bhoj dharti,bhoj darara,bhoj mataur, group of 3 no. of habitations annual mtc.works for water supply - c fixing of c.i. valves hydrants extra for fixing sluice valves/flap valves socketed or flanged, providing and fixing cast iron double flanged swing check type reflux (non return)valves, l filter media providing, lowering, laying in trenches, aligning, fixing in position and jointing, na ci/ductile iron pipes and specials providing and laying double flanged (screwed / welded) centrifugally (spun) cast iron.

State Government

CTN :45732645

02 Jul, 2026 48.7 Thousand

Pinjore - Haryana

Tender For bhoj dharti,bhoj darara,bhoj mataur, group of 3 no. of habitations annual mtc.works for water supply - extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores, providing and fixing c.i. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc.,

State Government

CTN :45732720

10 Jul, 2026 41.5 Thousand

Fatehabad - Haryana

Tender For haroli block: ratia panchayat: haroli dist.: fatehabad annual maintenance work for water supply - c fixing of c.i. valves hydrants extra for fixing sluice valves/flap valves socketed or flanged, providing and fixing suitable floating arms with gi sheet.

CTN :45700286

15 Jul, 2026 NA

Ernakulam - Kerala

Tender For procurment of diving items - o-ring 10-pack, screw 10-pack, o-ring, 6.07x1.78, pu, nm&oc, 10x336900182, o-ring tool kit, nm, spring, anti rust tube, cylinder ring assy., pressure gauge assembly for regulator unit, protective cap, suit hose, low volume visor for diving mask/face mask for aga divator, face mask for diving mask for ag divator, guide disc, diaphragm holder, guide pin, locking spring, lever, sealing sleeve, connection nipple, centre spindle, lever spring, cover, mask body, relief valve spring, stop ring, washer, spring, hand wheel cover, nipple, webbing buckle, buckle,fixed part, piston, orifice, spring, safety disc, safety plug 300 bar, handle section, spacing washer, level support, guide buishing, valve cone, quick coupling connection, plug, cover, hose gasket, gasket, washer, valve housing diving, diviator mkii lebel, holder, nut, locking ring, retaining ring, spacer, locking ring, cylinder ring, o ring, o-ring 12,42x1,78, 10-pack, o-ring 10-pack, o-ring 10-pack, o-ring 10-pack, o-ring 3, 1 x 1, 6, 10-pack, o-ring 5-pack, screw 10-pack, screw 10-pack, screw 10-pack, nut 10-pack, screw 10-pack, screw 10-pack, washer, nut 10-pack, sealing plate 25-pack, protective cap 3-pack, pin 10-pack, pin 10-pack, gland seal 10-pack, non-return valve disc 10-pack, high pressure hose, positive pressure attachment, sealing piston assy., washer 10-pack, o ring, shoulder strap assy,right, shoulder strap assy,left, valve stem assembly, spacer 10-pack, o ring, low volume visor, strap lovk, screw, diaphram, head harness, connection nipple, lifting spindle, piston, piston 5-pack, antifreezing cap 5-pack, high pressure hose short, discharge plug (din) controlled, locking strap, 1 pcs, pad, mk4 regulator assy, breathing bag, mouthpiece assembly, relief valve, high pressure hose assembly, bracket, strap, screw, buckle, male 40mm, locking clip, fomlube, neck strap, dosage regulator, warning indicator, bellow arm, safety pressure unit, valve holder, locking ring, o-ring 18, 77 x 1, 78, bellows assembly, dosage manometer assembly, o-ring 52, 0 x 3, 0, bellows weight, assembly, pressure gauge assy, canister lid gasket, screw assembly, lower, buckle holder with buckles, long, elastic string, 1700mm, sealing tape, screw, 1 pcs, screw, 1 pcs

State Government

CTN :45705842

30 Jun, 2026 NA

Pinjore - Haryana

Tender For fixing of c.i. valves hydrants extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 1. 80 mm i/d, fixing of c.i. valves hydrants extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 2. 100 mm i/d ,fixing of c.i. valves hydrants providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 2. 100 mm i/d ,ilter media providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/d ,supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm

State Government

CTN :45702943

30 Jun, 2026 NA

Ambala - Haryana

Tender For fixing of c.i. valves hydrants extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 2. 100 mm i/d ,providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/ ,development of tube well with pump of suitable rating to that full satisfaction and as directed by the engineer-in-charge , miscellaneous items 1.5. supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm

CTN :45714945

21 Jul, 2026 1.88 Lacs

Saharanpur - Uttar Pradesh

Tender For supply of discharge valve rubber seat for pan no.4 and 7 as per our drg.no.b 21 81r , rubbber bush as per drg. no. 25 82 dholak type 18.25mmidx40mmodx35mm long. , rubber taper plug for evaporator tubes plugging sutiable for 42 45 m.m. tubes , rubber taper plug fore evaporator tubes plugging sutiable for 98 102 m.m. tubes , rubber seat for pan main hole as per skech no. b 272 2003 for pan no.01 03 05 06 and 07 5 nos , rubber seat for exhaust valve of pan no.2 vapour cell and semi kestner as per drg. no.b294 2005. , rubber star for star coupling sl 100 of p.g. drive , rubber seat for condenser drg b 348 2012 , telescopic value rubber seat as per drg. b111a 91 , mud seal for clarifier as per drg. no 71 82 r1 , rubber bush for cane leveler as per drg no m 6 81 r , mill hydraulic bucket size 303 mm as per drg no kcsf 359 2018 hardness 85 90 , mill hydraulic bucket size 300 mm as per drg no kcsf 3 81r hardness 85 90 , rubber strip for dynamic juice heater size 12x16 mm as per sample , rubber strip or semikesner as per sketch b 204 99 , neoprone rubber seat 600x450x25mm , neoprone rubber seat 900x750x25mm , neoprone rubber seat 950x800x25mm , neoprone rubber seat 650x500x25mm , rubber star l 75 , rubber seat for pan pneumatic cut over valve size 8 inch puri make for pan no.05 06 and 08 210x135x20mm , rubber seat for pan pneumatci cut over valve size 10 inch puri make for pan no.01 02 and 03 265x175x20mm , rubber seat for pan pneumatic discharge valve size 20 inch puri make for pan no.02 05 and 8 550x430x22mm , rubber seat for pan pneumatic discharge valve size 24 inch puri make for pan no.01 and 03 655x490x25mm , rubber sheet size 235x30x12 mm thick. for all j.h double beat valve , rubber sheet size 235x30x12 mm thick. for globe valve as per sketch no b 101 90 , seal kit for pneumatic lock cylinder 3 inch puri make as per sample , seal kit for pneumatic lock cylinder 8 inch puri make as per sample , seal kit for pneumatic lock cylinder 12 inch puri make as per sample , rubber bush 35x15x35 , rubber bush 38x15x38 , rubber bush 38x18x38 , rubber bush 30x15x30 , rubber seat for right angle valve 6 inch , rubber seat for right angle valve 4 inch , rubber seat for right angle valve 3 inch

CTN :45388725

02 Jul, 2026 2.00 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For corrigendum : supply of rubber seat for pan discharge valve , rubber seat for telescope valve , rubber sheet for juice heater exhaust steam valve , rubber seat for juice weingh scale 1 , rubber seat for water weingh scale 2 , neoprene rubber buffer for centrifugal machine for 1250 , neoprene rubber seat for juice clarifier telescopic , neoprene rubber bucket for syrup sepretor cylinde , neoprene rubber ring , rubber sheet for quad ist body semikestner vapour inlet , rubber sheet for quad ist b body semikestner vapour inlet , rubber seat for semikestner vapuour outlet valve , sbr rubber seat for quad ist body exhaust valve , srb rubber seat for semikestner vapou in let valve to quad ist body , srb rubber seat for exhaust valve of juice heater 1 , srb rubber seat for exhaust valve of juice heater 2 , sbr rubber sheet for pan no. 7 b inlet vapour valve , sbr rubber sheet for pan no. 7 a inlet vapour valv , sbr rubber sheet for pan no. 1 a inlet vapour valve 1 , sbr rubber sheet for pan no. 1 a inlet vapour valve 2 , sbr rubber sheet for pan no. 1 a inlet vapour valve 3 , srb rubber seat for juice heater glove valve , srb rubber seat for vapour cell , srb rubber seat for semikestner inlet exhaust valve , srb rubber seat for vapour cell in let exhaust valve , rubber seat for quad , sbr seat for old vapour cell inlet exhaust valve , rubber stoper for juice and water tank , rubber seat for synth epdm nrv 1 , rubber seat for synth epdm nrv 2 , rubber seat for synth epdm nrv 3 , synth epdm rubber seat for nrv 4 , synth epdm rubber seat for nrv 5 , epdm rubber tapar plug for 42x45 brass tube , rubber taper plug for 96x100mm tube id , rubber taper plug for 98mmx100 brass tube id , neoprene rubber bucket for plough cylinder , neoprene rubber bucket for syrup sepretor puenmatic cylinde , neoprine rubber buffer a centrifugal machine 650 kg , neoprine rubber bucket for gate cylinder , neoprine rubber o ring for wk1350 , neoprine rubber seat for double bit valve , neoprone rubber seat for pan angle valve 1 , neoprone rubber seat for pan angle valve 2 , neoprone rubber seat for pan angle valve 3 , neoprone rubber seat for pan angle valve 4 , rubber bucket for brake cylinder , rubber bush 1 , rubber bush 2 , rubber cone 3 , rubber coupling for sugar grader , rubber damping pad for nk 1100 , rubber flat ring , rubber hose pipe 1 , rubber hose pipe 2 , rubber bush dholak type for coupling 1 , rubber bush dholak type for coupling 2 , rubber o ring 1 , rubber o ring 2 , rubber o ring 3 , rubber o ring 4 , rubber o ring 5 , rubber scraper for mud , rubber star for 1250 , rubber strip 1 , rubber strip 2 , neoprene mill hydrulic bucke , rubber mud seal , rubber o ring big , rubber o ring small , rubber bush for trpf coupling , rubber strip

Central Government/Public Sector

CTN :45302597

29 Jun, 2026 NA

Bangalore - Karnataka

Tender For bid to ras tender for supply of fuel feed line blank -male , inserting tool , puller - shurlock-sl61 wt-m16 , dummy feed hose , special socket -alh-12437 , blanking plug for refueling valve , teflon dummy for fuel system , open end spsnner -thin 27 x 32 , blanking plate-fuel tank , fmt neck dummy plate , blanking plate bottom for aux tank , blanking plate top for aux tank , ncw dummy al welded , fmt tank side plate , rmt neck dummy cover , weighing beam , tow bar - aluminium -iss h1 , towing bar , trolley - mgb , tm engine trolley - turbomeca , alignment tool , wrench ext actuator assy , rigging tool-for direction control , spanner-tds , stand-tail boom , alignment tool , spacer-01 set of 4nos , protractor - issh1 , tab bending tool- iss h2 , rigging tool-clinometer mounting , assembly fixture , clinobar block , rigging fixture , alignment tool -for tds bracket , insertor - tds assy segment-3 , extrator - tds assy , drift , tow bar -wheel version , extracting tool -tail rotor assy , spanner - special , spanner - special , storage stand -floor board , special socket spanner , eo pod trolley , handling trolley -radar ant , desiccator removal tool-for eo pod , nitrogen purging valve -for eo pod , lifting sling-20 mm turretgun inst , lifting device assy , socket -for eo pod , media , media , static discharge pole , jacking tool , bucking bar , hoisting of alh , checking tool -strut-bracket assy , drill jig -for casing ring iss d , aris alignment fixture -ots , extractor , insertion tool , removal tool -support bush-trs , actuating media-upper control assy , ids lifting sling , base plate c-brg bush removal tool , extraction tool , moving table with wheels , installation trb stand , levelling bar , levelling bar , storage stand - mrb , locator -for stabilizer bracket , engine oil replenishment tool , holding tool ots and non ots mgb hsg , steeering arm , grip gaurd -grip collective stick , dail gauge holder -mra , spl socket spanner tommy bar 450 lg

Flap Valves Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

State Government

Central Government/Public Sector