Latest flash arrestor Tenders | Government flash arrestor Tenders

Central Government/Public Sector

CTN :44698679

06 May, 2026 1.39 Crore

Bhilai - Chhattisgarh

Tender For bid to ras providing of custom bid for services - various repair jobs of emd - overhauling/dismantling of the existing w ater drainer by isolating the drainer by putting blank plate after isolation valve. purging/removal of trapped gas from the seal pot/pipe line by injecting st eam/nit rogen. revisioning of all parts & cleaning of pot. if required, the complete seal pot w ith pipe line has to be new ly fabricated & erected as per the instruction of o.a. or as per draw ing. after erection, testing of pot by injecting st eam/nit rogen and de-isolation/commissioning. the condensate pipe from w ater drainers has to be laid to the nearest storm w ater manhole or as directed by o.a.s representative. painting of w ater drainer and pipes to be done after the erection job , "technical cleaning of gas pipeline water drainers. the w ork involves closing/blanking of valves, st eam purging of pipe/drain pot and opening of f langes of seal pot and removal of muck/deposit from pots, revisioning of gas inspection valve,w ater filling valves,condensate valves. fixing of new packing and tightening of f langes. filling of w ater in the seal pot and de-blanking of w ater drainer/opening of valves. checking for any leakages and rectification of the same " , the job involves cutting/dismantling of corroded structures like column, platforms, w alkw ays, staircases etc. at height. before cutting of any structure, the nearby pipe lines or any other equipment to be supported f irst. the dismantled structures should not be throw n from height. all the dismantled structure to be kept at one place as directed by o.a.s representative for disposal by bsp , the job involves fabrication of st eel structures like column, platforms, w alkw ays, staircases etc. by type 1 electrode, as per approved draw ing / specification or as directed by oa/oa¿s representative complete in all respect including painting. fabricated structures w ill have to be erected by the contractor at height as per the direction of operating authority , the job involves w elding of tack w elded pipes, gland compensators, disc compensators, flanges, st eel structures, gas pipeline equipment, plates, pipes, structures w ith type 1 w elding electrodes , dismantling of gas pipe line or any other pipe line by cutting, including handling and stacking, cutting into pieces and sections as directed by oa/oa¿s representative & stacking at designated location. before cutting the nearby pipe lines/platforms/equipment to be supported. all dismantled structural items to be kept at a particular place, as show n by o.a.s representative for disposal by bsp , job involves erection of fabricated/available pipes at locations show n by o.a./o. a' s representative, including dia. 100mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. any accessories like bleeder pipe, drainer pipe, purging nipples, valves,compensators, saddle supports etc. also to be erected, as directed by o.a , fabricated/available pipes at locations show n by o.a./o.a. s representative, above dia. 100mm and up to dia. 200mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. , fabricated/available pipes at locations show n by o.a./o.a. s representative, above dia. 200mm and up to dia. 500mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. any accessories like bleeder pipe, drainer pipe, purging nipples, valves, compensators, saddle supports etc.also to be erected, a

Central Government/Public Sector

CTN :45057831

22 May, 2026 NA

Ropar - Punjab

Tender For tender for supply of cutting nozzle -cutting nozzle -1 , cutting nozzle -2 , cutting nozzle -3 , gas cutting torch , flashback arrestor

Central Government/Public Sector

CTN :44993715

04 May, 2026 NA

Nagpur - Maharashtra

Tender For supply of gas cutting sets including (i) manual blow pipe for welding & cutting, (ii) 1/16 inch. nozzle, (iii) oxygen regulator with double pressure gauge, (iv) acetylene regulator with double pressure gauge, (v) black flexible hose pipe, (vi) red flexible hose pipe(vii) flashback arrestor, (viii) cylinder key, (ix) nozzle cleaner& (x) spark lighter , detailed specification as per attached annexure a [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :44949101

19 May, 2026 NA

Dibrugarh - Assam

Tender For supply of gas cutting accessories - oxyacetylene gas cutting torch inclusive of nozzle , gas cutting torch mounted flashback arrestor for oxygen line , gas cutting torch mounted flashback arrestor for acetylene line , gas cutting nozzle for acetylene fuel , two stage oxygen gas regulator , two stage acetylene gas regulator , aluminum welding cable twisted braided and insulated , fully insulated welding electrode holder rating 600 amps

CTN :44883983

23 Apr, 2026 NA

Krishna - Andhra Pradesh

Tender For supply of chain conveyor system installation , dismantling and shifting of existing conveyor system , conveyor mid section drive unit , conveyor helical drive unit supply installation , fabrication and installation of mid drive assembly , conveyor bend section supply installation , supply and installation of stainless steel plates , shifting of 24head platform , shifting of 24head adjustment scale , 12inch and 14inch pipeline laying work , welding and cutting of hydrant pipeline , anti corrosion wrapping coating of hydrant pipeline , replacement of 12inch valve , supply of industrial chipping machine , rcc , connection of msv vapour pipeline , supply and installation of 1inch pipeline , painting of 6inch pipeline , installation of isolation valves , replacement of channel structure , repair and maintenance of telescope booms , chain conveyor system supply , supply of stainless steel soap trays , supply of mild steel soap trays , supply of heavy duty soap trays , fabrication of pipeline and structural side cladding , supply and installation of drip trays with y bend

CTN :44705138

21 Apr, 2026 NA

Bhilai - Chhattisgarh

Tender For corrigendum : biennial rate contract for supply of forbes marshall spares installed at various nspcl stations - dual seismic vibr.monitor, make:shinkawa, ramp diff.exp.monit:vm5n9101100010010020, hpt rotor expansion cable, fw-263fa-80, velocity sensor,model no cv-861,shinkawa, casing expans ipc:extn.cable:lw-010b-s-0, relay o/p module;shinkawa(vm-5y1-02), shaft vib direct, fl-202f08a-m2-00-03-10, vibratn monitr:dual seismic,0-50mm,vm-5u, sensor rotor hpt,fl-263f50a-m1-00-04-10, hp rotr exp:driver for hpt,fk-263f-6-3-1, ecs(8 mm)for a/s model:fl-202 f08a-m2-0, 4m ext.cable tsi a/smodel: fw-202fa-40, driver for 5m cable a/s model: fk-202f1, loop pwr vib sensor, extension cable 10 mtr ss, forbe marshal:ui-20n actuator repair kit, forbe marshal:ui-30n actuator repair kit, electronic card:48v power supply, electronic crd:pwr sply pcb for dcem2100, electronic card:fmdcem21xx baseboard pcb, electronic card:fmdcem21xx, ddu keypad, blower unit:air purge assy m4x12pan head, transreceiver:assy with 10m cable, eddy curnt. sensr,fl-202f08r-m2-00-03-10, eddy curnt. sensr,fl-202f08l-m2-00-03-10, velocity sensor: cbv160; shinkawa, 5 mtr detachable cable for cbv-160, ph analyser:ph sensor, sp.cond.meter:sp. cond. sensor for swas, 10 mtr extension cable for cv 861 sensor, cable:exten cable l=5 m for cv 861sensor, pwr supply unit,for vms,model no.vm-5z1,, shaft vib rev,fl-202f08r-m2-r5-03-10, proximtr:tsi mod:driver:fk-202f2-1-1/z07, extension cable 8 meter, fl-202fl-80, displacement sensor direct mount type, hp rtr expn:senr 1m cbl-vl-263p50a-1002, proximtr:electr modu:driver:vk-263p4/sys, extension cable 8 meter, vw-263pa-8, non/c eddy currnt sensr(vl-143p25a-1002), driver for ramp diffl expn (lpt)shinkava, extn cable 8 meter for lpt diff expn, axial shift sensr,fl-452f11a-m1-00-03-10, axial shift:driver :model: fk-452f-2-1-1, ext.cable for axial shift,fw-452fa-80, casing expansion hpc:lvdt for casing exp, 4ch. monitor module vm-7 tsi mod:vm-701, power supply:p.s.card:vm751,shinkawa, host communication module model:vm-742, absolute vibrn.monitor: vm-702; shinkawa, hpc:signal conditioner overall exp lvdt, coolers:sample cooler part no. dhx-3, coolant flow indicator p/n. f4w2011550, coolant isolation valve p/n. f4w2011521, ph cell for swas ;part no.- fm1104, cation conductivity cell; k=.01;fm8310, specific conductivity sensor;p/n fm8311, extension cable:tss ext cable 10 mtr, driver for axial shift,fk-452f-2-3-1, ext cable for vibration mod:fw-202fa-80, ele modul:shaft vib driver,fk-202f-2-3-1, proximtr:proximity driver fk-202f-1, forbes marshall:8 ch relay module, local unit:solenoid coil with block, lens:lens assy.for dcem2100, remote control unit:key pad, loop powered vib sensor for ct fan, eccentricity & speed module vm-703b, digital vib ind-ct fan vms, power supply unit,, local communication module with phase marker, communication gateway module, vibration & thrust four channel monitor, tachometer module, 18 ch relay module, key phasor:phase mark sensor with cable, communication module:communication modul

Central Government/Public Sector

CTN :44715987

09 Apr, 2026 NA

Bhilai - Chhattisgarh

Tender For various repair jobs of emd - overhauling/dismantling of the existing w ater drainer by isolating the drainer by putting blank plate after isolation valve. purging/removal of trapped gas from the seal pot/pipe line by injecting st eam/nit rogen. revisioning of all parts & cleaning of pot. if required, the complete seal pot w ith pipe line has to be new ly fabricated & erected as per the instruction of o.a. or as per draw ing. after erection, testing of pot by injecting st eam/nit rogen and de-isolation/commissioning. the condensate pipe from w ater drainers has to be laid to the nearest storm w ater manhole or as directed by o.a.s representative. painting of w ater drainer and pipes to be done after the erection job , "technical cleaning of gas pipeline water drainers. the w ork involves closing/blanking of valves, st eam purging of pipe/drain pot and opening of f langes of seal pot and removal of muck/deposit from pots, revisioning of gas inspection valve,w ater filling valves,condensate valves. fixing of new packing and tightening of f langes. filling of w ater in the seal pot and de-blanking of w ater drainer/opening of valves. checking for any leakages and rectification of the same " , the job involves cutting/dismantling of corroded structures like column, platforms, w alkw ays, staircases etc. at height. before cutting of any structure, the nearby pipe lines or any other equipment to be supported f irst. the dismantled structures should not be throw n from height. all the dismantled structure to be kept at one place as directed by o.a.s representative for disposal by bsp , the job involves fabrication of st eel structures like column, platforms, w alkw ays, staircases etc. by type 1 electrode, as per approved draw ing / specification or as directed by oa/oa¿s representative complete in all respect including painting. fabricated structures w ill have to be erected by the contractor at height as per the direction of operating authority , the job involves w elding of tack w elded pipes, gland compensators, disc compensators, flanges, st eel structures, gas pipeline equipment, plates, pipes, structures w ith type 1 w elding electrodes , dismantling of gas pipe line or any other pipe line by cutting, including handling and stacking, cutting into pieces and sections as directed by oa/oa¿s representative & stacking at designated location. before cutting the nearby pipe lines/platforms/equipment to be supported. all dismantled structural items to be kept at a particular place, as show n by o.a.s representative for disposal by bsp , job involves erection of fabricated/available pipes at locations show n by o.a./o. a' s representative, including dia. 100mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. any accessories like bleeder pipe, drainer pipe, purging nipples, valves,compensators, saddle supports etc. also to be erected, as directed by o.a , fabricated/available pipes at locations show n by o.a./o.a. s representative, above dia. 100mm and up to dia. 200mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. , fabricated/available pipes at locations show n by o.a./o.a. s representative, above dia. 200mm and up to dia. 500mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. any accessories like bleeder pipe, drainer pipe, purging nipples, valves, compensators, saddle supports etc.also to be erected, as directed by o.a. , overhauling of valves up to d

CTN :44326172

30 Mar, 2026 50.00 Lacs

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of 12 mm coper line oxygenvaccumenitrous , 15 mm coper line oxygenvaccumenitrous , 22 mm coper line oxygenvaccumenitrous , 28 mm coper line oxygenvaccumenitrous , 42 mm coper line oxygenvaccumenitrous , 12 mm isolation valve oxygen vaccumenitrous , 15 mm isolation valve oxygen vaccumenitrous , 22 mm isolation valve oxygen vaccumenitrous , 28 mm isolation valve oxygen vaccumenitrous , 42 mm isolation valve oxygen vaccumenitrous , bs type out lates new oxygen vaccumenitrous , bs type out lates service oxygen vaccumenitrous , din type outlate new oxygen vaccumenitrous , din type outlate new service oxygen vaccumenitrous , flow meter with humdifier bottle new , flow meter with humdifier bottle service , fa vovle new , fa volve service , bed head pannel new , bed head pannel service , vacher change , o rings change , control pannel new semi automatic , control pannel new fully automatic new , control pannel new semi automatic service , control pannel new fully automatic service , control pannel automatic service , mannifold new , manifold old service , nrv new , nrv service , tail pipe copper new , tail pipe flexible service , tail pipe copper service , gas regulator new double meter , gas regulator new single meter , gas regulator service , area alarm new 1 gas 2 gas 3 gas 4 gas 5 gas , area alarm service 1 gas 2 gas 3 gas 4 gas 5 gas , vaccum pump new as per specification , vaccum point new , vaccum point service , vaccum jar new , vacuum jar service , oxygen probel connector new , liquid plant service , prs system new , pps system service , rs 40 new , monthly service weekly , quaterly service three in a month , half yearly service two in a month , yearly service one in a month and on a call , three year service parmanent technician , concentrator repair service , concentrator new , c pap repair service , cpap new , ventilator service , service charge each service , labour charge each work //bid details2 / 42

Flash Arrestor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector