Web Analytics Made Easy - StatCounter

Flashlight Connector Tenders

Get complete information related to latest Flashlight Connector Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Flashlight Connector Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Flashlight Connector Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :45555774 Due date: 22 Jun, 202622 Jun, 2026 NA
Tender For supply, termination installation, testing and commissioning of ventilation system on roof of paint shop of lower parel workshop along with complete installation, frame work of suitable size with ms 50mmx 50 mmx 5mm, cabling, cable try work, wiring and protection system with 4 pole 20a mcb for each and mcb board along with 2.5 sqmm cable 4 core and 10 sqmm cable from panel to distribution board for main supply and power full exhaust system of length and height minimum 1 meter with width minimum 400 mm, diameter blades 900 mm, blades rotational speed -620 r/min or more. air flow 30,000 m?/h, noise level shall be less than 70 db, power shall be minimum 750 watt with the flap system and motor starter of 1 hp or as per suitable and confirming to s/iec 60947-4-1 or latest. all electrical works shall be carried out in accordance with the provision of indian electricity act 2003 and indian electricity rules 1956 amended to date and all the safety codes and procedures outlined in the safety codes shall be complied with general and safety requirement shall be governed by is 13947 (pt i) 1993 and is:8623/1993, amended to date. termination of all cables shall be done with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 20a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 2.5. type test certificate from nabl or any other govt agency lab report shall be attached along with the offer without which offer will be rejected. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45500842 Due date: 23 Jun, 202623 Jun, 2026 NA
Tender For quotation for purchase of electronic components -battery charger 8s lifepo4 -29.2v 5a with xt60 connector ,24v 14.6a-350.4w smps (ac to dc converter) ,cytron smart drive mdds30 dual 30a (80a peak) ,soldering station ,xt90 male connector with housing ,voice recognition module v3 compatible with arduino ,max9814 high performance microphone agc amplifier module ,fluke 106 palm-sized digital multimeter ,m4 ss stainless steel hex nuts (50 pcs) ,m4x30mm socket head cap (allen) bolt and nut (12pcs) ,m3 x 20 mm socket head cap (allen) bolt-25 pcs. ,m3 ss stainless steel hex nuts (50 pcs) ,jumper wire (male to male) (40 pcs) ,jumper wire (male to female) (40 pcs) ,jumper wire (female to female) (40 pcs) ,aa 2000mah nicd/nimh battery - pack of 4 ,cc61n eneloop battery charger with usb cable

Central Government/Public Sector

CTN :45473211 Due date: 13 Jun, 202613 Jun, 2026 NA
Tender For (supply)-supply of under frame swivelling type 200/180 watts led rolling in examination light arrangement duly housed in ms box with 20a, 230v dp mcb safety protection with minimum wall thickness of 2mm of suitable size with powder coated and twin glass fixing mounted with along with residual current protection operated on 190v-240v ac supply with load current 16a conforming to is 12640 (part 2):2008 iec61009-1:1996 or latest or latest with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 16a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 2.5 and with 180/200 watts led flood light fitting with clamp set of 50mm pipe for the length of 750mm with 180 degree rotating arrangement with full set led flood light [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45404169 Due date: 06 Jun, 202606 Jun, 2026 NA
Tender For supply and testing with end termination, intermediate termination and cord-end termination of over current protection system along with full end termination along with residual current protection operated on 230v ac supply with load current 40a, 2 pole conforming to is 12640 (part 2):2008 iec61009-1:1996 or latest with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 40a copperpalm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking 1 resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 16 with earth leakage protection of 30 ma, with cord end termination suitable for copper cable of conductor size 1.5 sqmm with cord-end termination, manufactured out of ec grade aluminium extruded extension tubes of minimum purity 99.5% and conductivity not less than 60% iacs, designed and fabricated strictly in accordancewith is:5082 specifications, duly conforming in all respects to is:2121 part-i & ii and is:2544 with provision for sustaining continuous operating temperature up to 120 degree c under specified service conditions. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45406205 Due date: 06 Jun, 202606 Jun, 2026 NA
Tender For supply of 125 amp, pre cooling socket panel powder coating siemens grey-7035 system suitable for air conditioning coaches as per bch model ds9b7a1sp99ph with 4 pole 125 amp mccb confirming to iec 61439 part 1 &2, is14772:2000 and is: 10118 (part iii) 1982 along with earth protection system having suitable for 70 sqmm xlpe cable and termination system for earth protection with 220 ampere copperpalm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 70 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 61 7-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 35 for lt termination & conforming to iec 61439 (part 1 & 2), is:14772-2000, is:10118 (part iii)-1982 with suitable frame. 70 sqmm cable shal be laid upto 150 mtrs through underground cable trench. as per annexure-a attached. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45391093 Due date: 18 Jun, 202618 Jun, 2026 NA
Tender For supply of palm mike (fist microphone) with ptt switch and rj connector suitable for digital vhf set 25 watts [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45337656 Due date: 18 Jun, 202618 Jun, 2026 NA
Tender For supply, installation, rewiring and testing of existing high mast with 4 sqmm 5 core electro propel rubber cable for 30 meter height high masts per is:694 along with terminal connector 440v, 30a ampere copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 4 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 61 7-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 35 with current rating of minimum 10a size 2.5 and 99.9% etp grade copper conductivity 97% iacs minimum, finish tin-plated, conforming to standards bs:en-61238 and other accessories [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45283324 Due date: 29 May, 202629 May, 2026 NA
Tender For specially designed industrial safety extension board with three numbers 20a, sp 240/415v mcb, and one number 30ma, 240v, double pole elcb/rcbo along with 15 meters 2.5 sqmm, 3 core copper cable with two pin industrial plug three number and three number sockets of 20a along with two numbers indication light placed on suitable wooden/fibre box with handle. mcb shall be confirming to is as per is/iec 60898: part 1:2015 latest and rcbo/elcb shall be conforming to is conforming to is 12640 (part 1): 2008 or latest. internal wiring shall be done with 1.5 sqmm single core copper cable and termination shall be done with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 16a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking 1 resistancefor barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 16 with earth leakage protection of 30 ma, with cord end termination suitable for copper cable of conductor size1.5 sqmm with cord-end termination. nabl certificate for the same shall be attached with the offer or at the time of supply. one sample shall be approved from dv.cee/wvpl. before hulk supply. [ warrantyperiod: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45240554 Due date: 29 May, 202629 May, 2026 NA
Tender For supply and testing with end termination, intermediate termination and cord-end termination of over current protection system along with full end termination along with residual current protection operated on 415v ac supply with load current 100a, 4 pole conforming to is 12640 (part 2):2008 iec61009-1:1996 or latest with bimetallic terminal connector suitable for 4 dia aluminium tubular busbar for 100a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 4 sqmm confirming to is: 5561-1970 with maximum temperaturerise of 90 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking 1 resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 16 with earth leakage protection of 100 ma, with cord end termination suitable for copper cable of conductor size 1.5 sqmm with cord-end termination, manufactured out of ec grade aluminium extruded extensiontubes of minimum purity 99.5% and conductivity not less than 60% iacs, designed and fabricated strictly in accordance with is:5082 specifications, duly conforming in all respects to is:2121 part-i & ii and is:2544 with provision for sustaining continuous operating temperature up to 120 degree c under specified serviceconditions. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45166276 Due date: 20 May, 202620 May, 2026 NA
Tender For supply and testing with end termination, intermediate termination and cord-end termination of over current protection system along with full end termination along with residual current protection operated on 230v ac supply with load current 16a, 2 pole conforming to is 12640 (part 2) :2008 iec61009-1:1996 or latest with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 16a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking 1 resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 16 with earth leakage protection of 30 ma, with cord end termination suitable for copper cable of conductor size 1.5 sqmm with cord-end termination, manufactured out of ec grade aluminium extruded extension tubes of minimum purity 99.5% and conductivity not less than 60% iacs, designed and fabricated strictly in accordance with is:5082 specifications, duly conforming in all respects to is:2121 part-i & ii and is:2544 with provision for sustaining continuous operating temperature up to 120 degree c under specified service conditions [ warranty period: 30 months after the date of delivery ]
 Loading, Please wait...

Connect us via What's Up