Latest flat chisel Tenders | Government flat chisel Tenders

Central Government/Public Sector

CTN :39697457

23 Apr, 2025 NA

Goa - Goa

Tender For bid to ras tender for supply of engineering workshop tools for fpv - st edge 500 mm length one end tapered , steel square 200mm , feeler gauge 0.01 to 1.0 mm , inside & outside calipers 0 to 200 mm , divider 200 mm , steel rule 300 mm , measuring tape 20 mtr cloth , die and tap m8 with handle , die and tap m10 with handle , die and tap m12 with handle , die and tap m16 with handle , die and tap m20 with handle , die and tap m24 with handle , adjustable spanner 150 mm , adjustable spanner 200 mm , adjustable spanner 300 mm , pipe wrench 350 mm , pipe wrench 500 mm , plier 150 mm , plier long nose , half round 8 1st cut file with handle , round 8 1st cut file with handle , flat 8 1st cut file with handle , oil funnel small 4 , oil funnel large 8 , oil can 150ml , punch round outing , chisel flate 150 mm , chisel flat 200 mm , hacksaw frame 12 inch size , parallel jaw bench vice 150 mm , port.electric hand drill 10mm , drill bit 3 to 10 mm , grease gun , circlip remover , bearing puller three legs 12 , bearing puller three legs 8 , wooden saw 8 and 12 1 no each , oil measuring jar 1 litre and 2 litres 1 no each , cleaning tray , vernier callipers , torque wrench 0 to 500 nm , hole saw 5mm to 25mm , flaring tool kit , a/c gas charging manifold with gauges , measuring tape 20m length steel for tank sounding , steel measuring tape 3 mtr , measuring tape 10 mtr cloth , steel wedges 150mm , philips screw driver 4 long , philips screw driver 6 long , philips screw driver 8 long , philips screw driver 12 long , eye bolt m 12 , centre punch tool , ball pein hammer 2.5 lbs , hammer wood , socket spanner set upto 36 mm size with storage box , single ended open spanner upto size 36mm , double end open spanner upto size 36mm , double end ring spanner upto size 36mm , allen key set 1mm to 10mm , hole punch , screw driver 4 long , screw driver 6 long , screw driver 8 long , screw driver 12 size , wire brush for cleaning files , hacksaw blades suitable for 12 inch hacksaw frame

Central Government/Public Sector

CTN :39711675

22 Apr, 2025 NA

Vellore - Tamil Nadu

Tender For corrigendum : supply of circlip plier internal , spare tip st raight

Central Government/Public Sector

CTN :40026593

28 Apr, 2025 NA

Ratlam - Madhya Pradesh

Tender For supply of set of tools consisting seven items (1) t-spanner with box head size 8mm, length: 100 mm a s per is specification is: 6131(1980), qty-01 nos. (2) insulated screwdriver flat head size 3 mm, 270 mm le ngth as per is specification is: 844-1 (1989), qty-01 nos. (3) combination pliers size 160 mm x 60 mm as p er is specification is: 2615 (1989), qty- 01 nos. (4) multipurpose spanner 2 inch jaw, length: 250 mm as per is specification is: 6149 (1984), qty- 01 nos. (5) ball pein hammer 500 grams approx as per is specification is: 841 (1983), qty-01 nos. (6) flat chisel 30 mm width, 6 inches length as per is specification is:402 (1990 ), qty- 01 nos. (7) hexagonal pin punch 3/16 inches x 6 inches as per is specification is: 6860 (1973), qty-0 1 nos. make: taparia or venus or jhalani or its equivalent. items to be supplied in carrying case per set. [ w arranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40038196

30 Apr, 2025 NA

Multi City - Multi State

Tender For supply of nose circlip plier

Central Government/Public Sector

CTN :40004320

03 May, 2025 NA

Narsinghpur - Madhya Pradesh

Tender For tender for supply of hand tools for mechanical maintenance - pipe wrench , 12in(300mm) , pipe wrench , heavy duty , 600mm , side cutting plier , insulated , 200mm , nose plier , insulated , 6in , hammer , double face sledge , 3.61-3.8kg , chisel , cold flat , 200x20mm , chisel , cold cross cut , 150x10mm , ring spanner , slogging , 70mm , ring spanner , slogging , 80mm , ring spanner , slogging , 85mm , ring spanner , slogging , 90mm , ring spanner , slogging , 95mm , ring spanner , slogging , 100mm , ring spanner , slogging , 105mm , spanner , slogging ring , alloy , 75mm , ring spanner , slogging , cr-v stl , 95mm , open end spanner , slogging , 100mm , spanner , slogging ring , dhs , alloy , 85mm , wrench , slogging open , open jaw , alloy , 61mm , spanner , slogging ring , dhs , alloy , 61mm , spanner , so , open jaw , alloy , 68mm , spanner , slogging ring , dhs , alloy , 68mm , wrench , so , open jaw , alloy , ph , 72mm , spanner , slogging ring , dhs , alloy , 72mm , open jaw wrench , slogging , 76mm , spanner , slogging ring , dhs , alloy , 76mm , wrench , so , open jaw , alloy , 77mm , spanner , slogging ring , alloy , 77mm , spanner , slogging ring , dhs , alloy , 78mm , wrench , so , open jaw , alloy , 78mm , spanner , slogging ring , dhs , alloy , 86mm , wrench , so , open jaw , alloy , 86mm , wrench , so , open jaw , alloy , 112mm , spanner , slogging ring , dhs , alloy , 112mm , wrench , pipe , is 4508 , 36 , spanner , adjustable , 18 , plier , flat nose , alloy steel , 6 , chisel , flat , 18 , 25mm , allen key set , 1-27mm , allen key set , 1/16-3/8mm , 1/2sq hex socket set , ext. circlip plier , straight nose , 7 inch , int. circlip plier , straight nose , 7 inch , open jaw spanner , double ended , 30x32mm

State Government

CTN :39711294

28 Apr, 2025 NA

Manuguru - Telangana

Tender For corrigendum : supply of t and p materials for cam division/stage-i and ii/btps.-supply of t and p materials for cam division/stage-i and ii/btps.- heavy duty general purpose hydraulic jack,capacity:5ton,, stroke:150mm,model:xl00, hydraulic jack:, capacity:20ton,stroke length :12mm,jack closed height:lessthan 55mm., hydraulic pump specifications.no of plungers:1,maximum pressure, pump, can develop:700kg/cm2,discharge/stroke.cc:2.8,weight: <=9kg., pump with teliscopic collapsible handle, hydraulic jack,with pmp threaded,100t,150mm, make: ener pac, portable arc welding machine model tornado -201 power saource with with, 3 meters supply cable + 3 meters welding cable with holder + 3 meters, return cable with earth clamp, make : esab/l&t/ador fontec, digital vibration meter model:ird 811d, gauge,dial;range:0.01 to 20 mm, make: mitutoyo, dial guage stand magnetic on/off switch, make:mitutoyo, vernier caliper (0-150mm) code no.530-335, vernier caliper (0-300mm) code no.530-322, make:mitutoyo, outside micrometer (150-300mm) code no.104-136a, make:mitutoyo, outside micrometer (300-400mm) code no.104-142a, tubular inside micrometer code no.137-208, block,chain pulley;type:triple spur gear manual;capacity:5 t;length:20, m;make:indef;additional information:lift p-series, block,chain pulley;capacity:2 t;maxi lift:20 m, block,chain pulley;type:heavy duty triple spur gear,light weight, body;capacity:1 t;maxi lift:15 m, make: indef/demag/kito/venus, d-shackle 5ton, make: usha martin, shackle;type:d;load rating:1 t, d-shackle 2 ton, make: usha martin, shackle;type:d;load rating:3 t, make: usha martin, d shackles 10 ton lifting capacity, make: usha martin, steel wire rope slings 10 ton capacity x 6mtr long, make: usha martin, belt sling,75 mm width 4 mtrs. length of polyster duplex flat webbing, with plain loops at both ends safety factor 7:1., make: usha martin, circlip;type:plyer;size:195 mm;additional information:ptno 1441-7internal nose, hand operated high pressure grease gun with all accessories(hose,nipples & trolley arrangement)-5kg capacity, allen keys set,1/16'' to 3/8'', feeler gauge, thickness: 0.03 to 0.5mm, no of leaves: 13 (long leaves),series: 184, make:mitutoyo, universal sets adjustable spanner 1171 cp insulation plier 162-8j,s.d.932&859, spanner set,double open end;size:32x36 mm;material:chrome vanadium/carbon steel, taparia make heavy duty pipe wrench ,length-450 mm,least max opening 73mm,product no-hpw 18, make:tapparia/mekastar/stanley/torquestar, taparia make heavy duty pipe wrench ,length-250 mm,least max opening, 48mm,product no-hpw 10, make:tapparia/mekastar/stanley/torquestar, d spanners set, 12nos, 6-32 mm, make: jhalani, bench vice,150 mm, ring spanner 6-32mm, hand pump, for oil barrel, hand greaqse gun, capacity:1kg, spanner,mekaster double ended deep offset ring spanner,chrome vanadium, steel chrome plated,wave profile having a/f size (mm):32x36 confirming, to din 838,iso 3318,10103,10104&691.,part no.mdrm-3236, spanner,mekaster double open ended spanner chrome vanadium, steel,chrome plated,position of open ends 15 degree having a/f size, (mm): 36x41 confirming to din 3110,899,iso 1711,10102,691&3318,part, no.mdom-3641, mekaster double ended deep offset ring spanner, chrome vanadium steel, chrome plated, wave profile having a/f size (mm):41x46 confirming to, din 838, iso 3318, 10103, 10104 & 691.,part no.mdrm-4146, spanner set,double open end;size:41x46 mm;material:chrome, vanadium/carbon steel, 400 amps inverter welding rectifier.model: buddy arc 400i, make esab, l and t, ador, fontec, chain pulley block,5t,10m, make - indef, demag, kito, venus, block,chain pulley;type:p;capacity:2 t;maxi lift:10 m, make - indef, demag, kito, venus, block,chain pulley;type:p;capacity:3 t;maxi lift:10 m, make - indef, demag, kito, venus, self supporting extendable aluminum ladder size; 16feet(closed) to 27, feet (extended), wire rope slings with eye & eye, 25ton x 1 1/4 x 6 mtrs length., make usha martin

corporations/Associations/Others

CTN :39778174

02 May, 2025 1.00 Lacs

Kolkata - West Bengal

Tender For corrigendum : supply and commissioning of medical items for prosthetics and orthotics workshop at ipgmer and sskm hospital (discipline- prosthetics and orthotics workshop) - orthotic bender, screw driver, jewellery file flat, jewellery file half round, jewellery file round shape, flat chisel, hacksaw, multi-cutter, draw knife, mallet hammer, center punch, wooden file, flat file, drill bit 1/8 , drill bit , drill bit 3/8 , drill bit 5/16 , nose pliers, rampi, rivet cutter, revolving punch, wooden saw, plaster cutting scissor, deburring tool set, goniometer, measuring tape, butter knife, rivet aluminium, rivet cutter, piler, scissors, oven gloves kevlar, stockinet roll ak, stockinet roll bk, socket alignment mandril / trans femoral, cast build up former ak/bk, lttp cutter, talcum powder

Central Government/Public Sector

CTN :39970914

29 Apr, 2025 NA

Bathinda - Punjab

Tender For supply of battery operated rotary hammer drill st machine complete with battery pack (02nos), charger, hammer drill bit (4 cutting edge made of tungsten carbide) 10mm 12mm and 16 mm, narrow flat and pointed chiesel single impact energy 2.6j, 1050 rpm, hammer drilling range 4mm to 28mm, optimum drilling range 6mm to 18mm, weight of tool must be less than 3kg, active torque control (atc), inbuilt active vibration reduction (avr), chiseling, chipping, depth gauge, removable chuck, reverse mode, torque clutch, triaxial vibration value for hammer drilling into concrete must be less than 11 (m/s2), triaxial vibration for chiseling in concrete must be less than 6(m/s2), 1st battery 22 (v) 8amp, weight less than 1.5kg, 2nd battery 22 (v)-4amp, weight less than 1.0kg, battery working range minus()17 degree to 60 degree, state of charge display, upgraded durability and battery monitoring ac??? built-in battery health tester, sealed electronics, shock absorbers and reinforced housing to better protect against jobsite conditions, battery charger i/p 230v, o/p power 240, o/p current 9.6amp, state of charge display. , supply of electrically operated concrete breaker with self sharpening chisels (four numbers). 02 nos 36 cm narrow flat chisels, 01 no 36 cm pointed chisel and 01 no 50 cm narrow flat chisel. the tool shall be of the following specification i.e impact energy 35j, impact frequency 1800, vibration to body less than 5m/s2, weight of concrete breaker tool must be less than 15kg, power i/p approximate 2.1kw, brushless motor, detachable supply cord, three lubricating chambers inside machine

Central Government/Public Sector

CTN :39950155

21 Apr, 2025 NA

Multi City - Multi State

Tender For supply of (ami no.23i27/25-26)set of flat chisels (4 no.) with quick coupling handle

Flat Chisel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors