Latest flat bar Tenders | Government flat bar Tenders

Central Government/Public Sector

CTN :45330804

13 Jun, 2026 NA

Haridwar - Uttarakhand

Tender For corrigendum : supply of hw1201997151 cu-hcp flat bar r240 spec: hw12097 rev: 05 size: 35x270x355 , hw1201997135 cu-hcp flat bar r240 spec: hw12097 rev: 05 size: 35x270x435 , hw1201998085 copper strip with round edges spec: hw12098 rev: 04 size: 50x20 l= 2500 , hw1201997143 cu-hcp flat bar r240 spec: hw12097 rev: 05 size: 35x270x180

CTN :45374718

17 Jun, 2026 NA

Hoigebazar - West Bengal

Tender For corrigendum : procurement of transom seat for bailey bridge panel dowel pin bracing plate chord tie plate ring plate mild steel socket shearing plate slotted plate as sub contract basis for works contract at howrah works

CTN :44560311

11 Jun, 2026 NA

Kolkata - West Bengal

Tender For bid to ras corrigendum : supply of 40x40x5 mm ms angle to gr. e250br , flat bar 200x65 to gr. e250br , 8mm dia ms rod is: 2062 gr. b

Central Government/Public Sector

CTN :45474981

26 Jun, 2026 14.85 Lacs

Bangalore - Karnataka

Tender For technical bid for supply of hvac operational spares , bearing (6206) size: od, 60 mm x id 50 mm ball bearing desig: 6001-z, ball bearing desig: 6307/2z c3 universal hvac/r controller, armoured 4 core x 6 sqmm xlpe copper cable. 1 sqmm frls multi stranded copper cable (single wire), 10 sqmm frls multi stranded copper cable (single wire) 4 sqmm frls multi stranded copper cable (single wire), fibre glass insulated copper wire for heater size: 6 sqmm, alkaline battery volt: 9vf sealed maintenance free (smf) lean-acid battery 7ah 12v, brush width: 3 inch for painting work. loctite 495 adhesive, kiwi drain cleaner heavy duty industrial safety gloves - cut-resistant (mechanical work), spray foam insulation (pfu) can qty: 750 ml wd 40 multipurpose spray size: 500 ml, green paint (bus green synthetic enamel black paint (synthetic enamel), ms flat bar size: 40 x 5 mm ms l- angle size: 25 x 25 x 5 mm, ms l- angle size: 40 x 40 x 5 mm metal primer (red oxide), black color spary paint 400 ml thread repair helicoil insert ss-m18 x 2.5mm x 1.5d, thread repair helicoil insert ss-m20 x 2.5mm x 1.5d thread repair helicoil, insert ss-m24 x 3mm x 1.5d thinner for oil-based paints, wire type buffing whee bench grinder wheel -heavy grade, dial test indicator (dti) gauge with flexible stem magnetic base stand, digital clamp meter capacity: 600a ac trms heavy duty exhaust fan, size: 9 inch backward curved fan with motor size: 355, mm dia ventilation fan for electrical panel sweep, dia: 12 cm induction motor fan, blade shaft size: 20 mm & blade dia: 130 mm, induction motor fan blade shaft size: 25 mm, & blade dia: 110 mm gi 6 mm x 25 mm bolt & nut with washer, anchor bolt with nut & washer size: 10 mm anchor bolt with nut &, washer size: 8 mm anchor fastner size: 10, mm for threaded rod gi self tapping screw, size: 3/4 inch (20 mm) head type: truss, pop screw size: 1 inch (25 mm) head type: flat (csk). ss self tapping screw size: 2 inch (50 mm), head type: hex din rail size: 35 x 7.5 mm, add on auxiliary contact block (1 no +1 nc) casing and capping size: 20mm (3/4 inch), casing and capping size: 50mm (2 inch) copper strip for electrical motor size: 25 x 3 mm, current transformer (for mfm/ammeter), ratio: 10/5a current transformer (for mfm/ammeter), ratio: 15/5a, current transformer (for mfm/ammeter), ratio: 20/5a current transformer (for mfm/ammeter), ratio: 30/5a, current transformer (for mfm/ammeter), ratio: 5/5a emergency stop switch, metal enclosure electrical junction box, size: 200mmx200mmx150mm, metal enclosure electrical junction box size:, 300mmx300mmx200mm three pole neutral (4p), 32 amps miniature circuit breaker (mcb) 4-way mcb metal enclosure, 2- module surface mounted pvc box. thermal overload relay, range: 14-23 amps electronic fan regulator, single module porcelain heater insulators or terminal. blocks, led indicator color: amber pin type lug size: 1.5 sqmm, pin type lug size: 2.5 sqmm pin type lug size: 4 sqmm, pin type lug size: 6 sqmm spade type lug size: 1.5 sqmm, spade type lug size: 2.5 sqmm metal flexible conduit size:19, motor protection circuit breaker (mpcb) range: 6.3-10 amps (rotary) motor protection circuit breaker (mpcb) inst trip rating: 2.5 amps (rotary), motor protection circuit breaker (mpcb) inst trip rating: 25 amps (rotary) motor protection circuit breaker (mpcb) inst trip rating: 50 amps (rotary), ms conduit size: 25 mm motor terminal block range: 10 hp/7.5 kw, motor terminal block range: 40 hp/30 kw thermal overload relay(olr) range: 20-33 amps, thermal overload relay(olr) range: 42-69 amps plug top 3 pin capacity: 5 amps, 4 pole power contactor capacity: mnx 12 4 pole power contactor capacity: mnx 18, 4 pole power contactor capacity: mnx 9 push button (illuminated) color: green, push button (illuminated) color: red plugable interface relay (4 c/o, 230 vac) with base, plugable interface relay (4 c/o, 24 vac) with base analog timer controller for split ac's, terminal block range: 0.2-2.5 sqmm,

Central Government/Public Sector

CTN :45280137

09 Jun, 2026 NA

Porbandar - Gujarat

Tender For bid to ras supply of pipe ms 1 inch , gi pipe 2 inch , aluminium pipe 35 mm , aluminium flat bar , ms flat bar 20 x6 mm , ms flat bar 50 x 6mm , ms angels 40 x40x 3 mm , aluminium sheet 3 mm 08x 04 feet , aluminium sheet 2 and 5 mm 08x 04 feet , fibre wheel with bracket 6 inch , cabinetcuff hinges , multi lock , panel lock with db key , wooden beadingsquare 1 by 2 and 1 by 2 , plywood 8 x 4 feet 12 mm , plywood 8 x 4 feet 18 mm , pipe ms 2 inch

State Government

CTN :45415293

08 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e quotation are invited for rate of materials - granular material or hard murrum for gsb works at quarry, aluminium alloy/galvanized steel, rcc pipe np 4 heavy duty non pressure pipe 1000 mm dia, rcc pipe np 4 heavy duty non pressure pipe 1200 mm dia, steel pipe 50mm external dia as per is:1239, coller for joints 300mm dia, rcc pipe np 4 heavy duty non pressure pipe 300 mm dia, steel helmet and cushion block on top of pile head during driving, steel pipe 25mm external dia as per is:1239, "np2 r.c.c hume pipe with collar as per i.s. 458-1971(i) 100 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(ii) 150 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(iii) 200 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(iv) 250 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(v) 300 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(vi) 450 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(vii) 600 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(viii) 700 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(ix) 800 nn dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(x) 900 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(xi) 1000 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(xii) 1200 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(xii) 1400 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(i) 300 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(ii) 450 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(iii) 600 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(iv) 700 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(v) 800 mm dia and 900 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(vi) 1000 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(vii) 1200 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(viii) 1400 mm dia", jute rope 12 mm dia, aggregate size-45 mm to 2.36 mm, aggregate size-45 mm to 22.4 mm, aggregate size-2.36 mm to 0.075mm, aggregate size 22.4mm to 5.6 mm, aggregate size 63 mm to 45 mm, aggregate size below 5.0 mm, bamboo (1st class) 85 mm-100mm dia 2.0 m long, bamboo (1st class) 85 mm-100mm dia 2.5 m long, bamboo (1st class) 85 mm-100mm dia 3.0 m long, bamboo (1st class) 85 mm-100mm dia 4.5m-5.5m long, bamboo (2nd class) 75 mm dia, 1.8 m-2.5 long, bamboo (2nd class) 75 mm dia, 2.1 m-3.0 m long, bituminous sealant, blasting material, bond stone (400mm x 150mm x 150mm), corbelling stones (300mm x 150mmx 150mm), corrosion resistant structural steel grating, crow bras 40 mm dia (hire charges), crushed sand or grit passing 2.36 mm and retained on 180 micron, crushed slag, crushed stone aggregate 26.5mm to 75 micron, crushed stone chipping 6.7mm size 100% passing 11.2 mm and retained on 2.36 mm, crushed stone chipping 9.5 mm nominal size, debonding strips (3.75m x 10mm x 5mm cut-out of rubber filler board or similar material including 5% wastage), edge stone (450mm x 350mm x 100mm), edge stone (450mm x 350mm x 200mm), epoxy paint, epoxy primer, gi pipe 100mm dia (tata or equivalent make), gi wires (4mm dia), granular material (natural occurring soil gravel mixture/quarry waste, kankar, laterite, dhandla, hand broken metal 40mm size, interlocking blocks with 60 mm thickness, interlocking blocks with 80 mm thickness, key aggregates passing 22.4 mm and retained on 2.8mm, lime putty, local wood piles (1st class)150-200mm dia, 6m long, local wood piles (1st class) 100mm x 75mm, loose stone, ms sheet tube (47 mmx47mmx12 swg sheet), ms sheet 1.5mm thick, ms sheet 2mm thick, polythene sheeting (0.2mm to 0.5mm thick), (covering 2/3 rd dowel bars (20x23) and tight fit including 5% wastage), rcc pipe np3 (750mm dia), rcc pipe np3 (500mm dia), rcc pipe np4 (750mm dia), rcc pipe np4 (600mm dia), rcc pipe np4 (500mm dia), benzene, stone for stone set pavement (300mm x 200mm x 150mm), well graded granular base material-grading a 26.5mm to 4.75mm, well gr

Central Government/Public Sector

CTN :45431586

16 Jun, 2026 NA

Ratlam - Madhya Pradesh

Tender For auction sale of others - released condemned and u/s abandoned railway staff quarters, under sse-works-mgn, {[1] 18 (a to j), 10 unit(type-1), location- morwani station, [2] 19 (a to d), 04 unit(type-1), location- bildi station, [3] 20 (a to b), 02unit(type-1), location- bildi station, [4] 61 (a to b), 02unit(type-1), location- lc-61, [5] 62 a, 01unit(type-1), location- lc-61 , [6] 16 (a to e), 05unit(type-1), location- raoti station, [7] 14 a, 01unit(type-3), location- morwani station]}, total- 25 unit consisting of,{[i] rail 75r, rail 41.25r, rail 90r, rail 69 lbs, rail 50 lbs, 60 lbs, 69 lbs cut rail, rail 52kg, rail 69 lbs double headed, cut rail, qty- 9972.40 kg approx., [ii] wooden scrap- door with and without chowkhat, wooden purlin, window with and without chowkhat, qty- 4822.47 kg approx., [iii] ms scrap- (1) rusted steel door, reinforcement, steel grill, gi pipe 40mm, ventilation, tiebar 50x10mm, xpm jail, angle 50x50x5, 75x75x10, 80x80x8, 45x45x4, ms wire, plate 8mm, flate bar, window bar, steel window), qty- 13823.98 kg approx, (iv) profile sheet, qty- 786 .59 sqm. approx, (v) pvc tank, qty- 12.00 kg approx, (vi) pvc pipe 110mm, qty- 45 rm approx, (vii) ac sheet, qty- 764.94 sqm approx, (viii) masonary, qty- 429.37 cum approx}. mode of delivery by lot basis and on as is where is basis, custodian- sse- works-mgn, fdp- 80 days. note- (1) hidden items other than jvr are not included in this lot, if found it will be handed over to the custodian before delivery, (2) description of lot is as per jvr, (3) electrical, non ferrous item are not included in this lot, (4) the eligible bidder shall prepare and submit the detailed dismantling scheme including methodology, safety precautions, sequence of dismantling, equipment to be used and traffic/safety arrangements to sectional sr. den/den through sr. dmm. (5) dismantling shall be permitted only after approval of dismantling scheme by the sectional sr. den/den.

State Government

CTN :45397974

11 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all lift, dewaterin

CTN :45419223

18 Jun, 2026 NA

Katni - Madhya Pradesh

Tender For supply of caliper harmafrodaite , chisel cold flat , hexa frame fixed type , safety goggles , straight ede , stud extrecter , verneir caliper , marking table , portable hand drill machine electric type , drill twist taper shank , file round second cut , file trungular second cut , file flate second cut t safe edge , file half round second basterd , file round secont bastard , file carad wire brush , wooden handal soldring iron copper bit , blow lamp , inter chegeable ratchet socket set , double ended tublare box spanner set with tomm bar , clamp toolmaker , hand reamer set taper pin straught fiute , machine remerr prallel helical fiute , chisel cold crosscut and diamond point , adjustable pipe die set bsp , wheel dresser star dresser with holder , machine vice swivel base , locker with 8 drawer , metal rack , machine vice , wing compass , hand hammar with handle , torque wrench standard ratchet , power tools for fastninig , different profile gauge plate type , indexable boribar with inserts , tempreature gauge , dowel pin starigut , standard tap screw , lapping plate , meduam carboon heat trated alloy steel metric stand , capsscrew , drill gauge , cast iron valve flanged type , c.i. sluice gate valve flanged type , stop cock , slip on forge steel flange , bolt nut with washer , pully for flat belt , steel keys , packing gasket , washer cluth key jib cotter and cirlip , drill drift , bearing different type , lifting sling , bearing extactor , pully extractor , flat headed hammer with handel , planishshing hammer , snip bent left cut , gauge snape go and not go , gauge pluge , gauge telescopic set , dial vernier cliper universal , depth micrometer , digital micrometer outside , comparator gauge dial indiate with stand and vracket , enggineering try squar , surface roughnes comerission plate , pipe bender machine , pedastel type grinding machine , hexa frame wing nut , file square secound cut , file flat bastard , stake grooving //bid details 2 / 56

State Government

CTN :45386911

22 Jun, 2026 10.00 Lacs

Delhi - Delhi

Tender For supply of furniture items at special commissioner office, 1st floor, office block 3, east kidwai nagar, new delhi - revolving chair type-1revolving chair- size- h: 1210-1330mm, seat h: 465-585mm, d- 690mm, w- 640mm. executive hi-back chair with bio synchro mechanism spring tention auto adjusted according to weight of body. pu padded seat & pp back with mesh fabric - lumber support in built. head rest with d-direction adjustment. with 3- direction adjustment arm rest. 5-prong nylon base for stability. twin wheel heavy duty castor for easy mobility under load. quality tapestry. high density moulded pu cushion.the item should be from the approved make of durian/ godrej/ hni/ herman miller/ steelcase or equivalent make., executive tableexecutive table- overall size: table - lenght-2100mm x width-900mm x height-750mm, side runner -width- 1200mm x depth-450mm x height-750mm, back runner- width-1650mm x depth-450mm x height-750mm, corner unit - lenght-450mm x width-450mm x height-750mm, 3drawer pedestal size- width-450mm x depth-540mm x height-650mm, table- made of bwr ply wood laminated with good quality mm thk laminate fitted with 25mm thick mdf fascia duly deco painted. door & drawer front made of 18 mm thk bslpb. top of desk and cabinet made of 12mm thk clear float glass. product must be in compliance with drawing and as per architect instruction complete product must be knockdown type in construction.the item should be from the approved make of durian/ godrej/ hni/ herman miller/ steelcase or equivalent make., reception deskreception desk-1500- overall size: - w:1500mm, d:750mm / 832 mm, 1200ht top d:728 mm. top made of 25 mm thick pre- laminated particle board. pvc edge beading of 2 mm edges by through feed machine. provision of cable manager as per l.h. orr.h. side requirement. provide duct for wire management. front covered by l-shape wooden box size-h-1200 mm, w-600 mm, d-300 mmmobile pedestal unit plpb- size: height:650mm, width:400mm, depth:450mm top made of 18mm thick pre- laminated particle board. side, back and drawer front are made by 18mm thk. pre-laminated particle board. metallic finish heavy duty handle. superior quality makes front mounted lock. provision of casters for mobility. special drawer slides for filing drawer. other drawers on roller slides. the item should be from the approved make of durian/ godrej/ hni/ herman miller/ steelcase or equivalent make., workstation on 1 seater with keyboard tray cpu trolly & mobile pedestal drawerworkstation - 1 seater with keyboard tray, cpu trolly & wooden mobile pedestal, overall size- l-1640 mm, d-820mm, h- 1215mm, working h 750mm, top made of pre laminated particle board with pvc edge beading. understructure also made up of pre laminated particle board with pvc edge beading.top- size: - 1500x750x25 mm thk. pre-laminated particle board. side edges covered by 2 mm thick pvc edge beading by through feed machine. 70mm thick tiles base partition- internal frame are made by 1.6mm thk. cold rolled close annealed powder coated sections. tiles are made by 12mm. thk. pre laminate particle board. tiles are also available in glass, fabric and steel option. frame structure are fabricated by mig/tig welding machine. tiles are fitted by high strength pvc dowel in pvc insert with transition fit. provision of slot for cabling and accessories. upper and side trim are 1mm thk. extruded powder coated aluminium section and pole is 1.6mm thick aluminium.mobile pedestal unit plpb- size: height:650mm, width:400mm, depth:450mm top made of 18mm thick pre- laminated particle board. side, back and drawer front are made by 18mm thk. pre-laminated particle board. metallic finish heavy duty handle. superior quality makes front mounted lock. provision of casters for mobility. special drawer slides for filing drawer. other drawers on roller slides.the item should be from the approved make of durian/ godrej/ hni/ herman miller/ steelcase or equivalent make., revolving chair type-2size-

Flat Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government

State Government