Latest flat iron Tenders | Government flat iron Tenders

corporations/Associations/Others

CTN :45315948

01 Jun, 2026 7.05 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing m.s.flat iron railing for parks in furniture market sector 34, chandigarh under ward development fund.

corporations/Associations/Others

CTN :45328177

05 Jun, 2026 62.00 Lacs

Kaushambi - Uttar Pradesh

Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on turnkey basis under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of centralised materials, 11 kv switch gear 600/300/5a 350 mva i/c, 11 kv switch gear 200/100/5a 350 mva o/g, 11 kv 3x300 mm2 xlpecable, 11 kv 3x120 mm2 xlpecable, 24 volt battery, 24 volt battery charger, pcc. 8.5 mtr. long for feeder, 11 kv tpmo switch with fixing clamp, 11 kv top channel, 11 kv dropper angle, earthing complete, stay set complete, 11 kv polymer pin insulator, 11 kv polymer disc insulator, 11 kv disc fiting, 33 kv control panel t/f, acsr weasel conductor, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as join

CTN :45332519

16 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of round ring , thermocouple , snap ring , spring washer , gasket , valve check , press relief valve , gasket , gasket , shaft , check valve , plate locking , gasket , shrinkage hose , eprom mpu24/mem5-02 programmed , screw , valve cap , tappet , temparature gauge electric , shaft rpm indicator , plug-in board , gasket , gasket , hose line with quick connection 1000 lg , cover , sk-05 power supply module , gasket , gasket , piston ring , filter/strainer , gasket , gasket , gasket , disc filter element , ring rubber , roller diaphagram , diffusser gasket , plug-in board , gasket , o ring , ezr 1712 element , nut m14x1.5 , pressure gauge , shaft seal , bolt hex a3c , snap ring 68 x 2 , 5 din 472 , snap ring 80 x 2.5 din 472 , valve cap , gasket , valve guide , gasket , gasket , gasket (135m01705/8) , valve , gasket leak off fuel , actuator , snap ring 24 x 1 , 2 din 471 , nut , copper profile (copper washer) , tab washer , valve guide , gasket , o ring 10x2 , o ring 12x2 , o ring 28x3.15 , o ring , gasket , metal gaiter , o ring 36x5 , o ring 135.89x659mm , pressure sensor 0-8 bar , shaft seal , friction washer , pressure gauge 0-10 bar , o ring , lock nut , seal fw pump , washer spring b10 , gasket , plug in sleeve , plug-in-board aib 1-02 , washer , gasket , valve non return , valve drain , rubber bellow , hp line , hp line , hp line b1 , hp line b3 , o ring 31x2.5 , hose line , valve non return , hp line b2 , o-ring , seat ring valve , thrust ring

CTN :45332546

16 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of eprom mpu24/mem5-02 programmed , panel rcs-fpp/04 , corrosion inhibitor rust ban 326 , snap ring 32x1.5 din 471 , computer accessories , plug-in board , screw m10x150 , gasket , pressure gauge 0-10 bar , temperature monitor , instrument , o ring 39.2x3 , plug-in board , telephone cable , thermocouple , adjusting washer , soldering iron stand , woodruff key , o ring , actuator vlv , cylinder head with valve , paste ultra therm mtu , pressure hose , oil filter , o ring , molykote paste g-n plus , gasket liquid loctite 573 , clamp , terminal , plug in board cob9-01/a , pressure sensor , relay 24v / 4a , conversion kit f/series 4000 (5205304531) , illuminescent diode , signal lamp , mpc1-01 card f/computer a.741620/741634 , software , tool bag , module cob 8-01 , diskette , housing , temperature sensor pt100/110mm , plug-in board , male connector , speed sensor , plug-in board sab 1-03(5295308912) , coolant level sensor , flashing lamp red , plug-in board cib 3-02 , plug-in-board not adjusted , speed transmitter dm52 , pressure sensor 1600 bar/r , relay , terminal , pressure sensor , flashing light , blue , fuse fk2/6a , terminal(0055314981) , terminal strip_0045310081 , fuse 2a fk2 , pressure sensor , switch , terminal block , pressure sensor 6 bar(sw) , fuel filter primary(lcm) , plug , w/p repair kit , relay , printer , thermal actuator , plug in board dfc 2-01 , display unlabelled , connection interface for monitoring , cable for monitor system , switch , loctite nr 510 surface sealant , plug , union , bolt m20 1.50x103.0 lg 18 conrod , switch , plate guard g73 , switch , bushing , bushing , modular system , led , conn fuel rail rear , diode m.kuelkoerp , plug in board mpu 30-02 , track-ball , cable , plug-in board , cover , automatic cutout , multi led 5 5k blue , plug in board , male connector , control lever ros 2 03 , fuse , control lever , o-ring , plug - in board , nut , sealing ring , keyboard english , terminal , wiring harness to injector , mpc 1 01 card f computer , silcone rubber loctite 5970 , compensating washer , plug-in board , switch , washer , shaft wtr pmp hi temp clg circuit , guide ring , valve keeper wedge , plug-in board , plate , flow restrictor , plug-in-board , plug in board , filter element , adaptor , modular system , plug-in board rob1-01 a , inb 1 , trackball , plug-in board , plug in board aib2-03 , aib 1 , plug-in board , plug-in-board , roller tappet , con rod bearing size 0-0 , pressure sensor , plug-in board , sealing ring , plug in board , bellows , transition socket , sleeve rubber , grommet , ring sealing a12x15.5 , hex nut , straight connector , rocker shaft , techometer , computer hard disc 2.5 60gb not adjuste , screw , eprom mem5 mcupps cps adjusted , audiable alarm , adaptor 10 6 n 15007 , plug , pressure spring , o ring , benjo screw , washer , o ring , plug in board , plugin board , washer , grommet , o ring , plug , drain valve , plug-in-board not adjusted , piston ring , washer , o ring , rtv , cover , split pin , level monitor bediaplca , terminal strip , contact block , module mcs 5 pim3 , oil seal high temp cirt pump , panel , repair kit , starter , bearing bushing , seal ring , circlip , seal ring , ring asm , contam indicator , fuel filter , pressure sensor , plug-in board

CTN :45333094

16 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of gasket kit , o-ring for set w5 , end plate , o-ring , stud , bearing angular contact roller , first plate , o ring 26 x 2.5 mmn 294 , o-ring , o-ring , seal oil , exh pipe bellows , contam indicator , fuel filter , o ring , gasket , cover for solars , clamp , 0-2200 1/min tachometer , corrosion inhibitor conc. coolant cs100 , gasket , spare part kit for fuel filter , oil filter (element) , 0-2400 tachometer , o-ring , washer a 16 , o-ring 60x4 for set w5 , gasket , bolt hex gal cu 5 bk , panel , diaphragm , diaphgarm , insert (crank case breather) , actuating cylinder , bush , isolator 60 sh rd314b , plug in board , nut , intercooler(a bank) , exhaust bellow , valve , sealing ring , o ring , bolt adjusting , valve exhaust std floating bridge , push rod , gasket for set w5 , stud , gasket , sealing ring for set w5 , cylinder head complete , oil separator , seal ring , pan2-01 panel , ring seal asm , shield heat turbo , flow restric valve , paper pack centrifugal spinner filter , o-ring 11.3x2.2 for set w6 , axial bearing , tester , o-ring , control lever ros 2-05/fpp , panel , pan1-01 panel , gasket kit , sealing ring for set w6 , panel , air starter , bearing body , seal oil 48x72x8 mnn386 , seawater pump , washer , coolant pump high-temp circuit , nut , washer , odr 2-02 computer , clamp , y-gasket vib.damper , mpc1-01 computer , end plate , air filter , rubber bellows , gasket for set w5 , gasket for set w5 , hylomer sq 32m , rubber bellows , coupling , o ring , end plate , connector , conical spr. washer , base complete , rubber bellows (s s 0002035083) , clamp , turbine wheel , tube injector , arm rocker intake , swing foll , trust member , cylinder , disc , compensating washer , washer , screw , cylinder head , injector , water pump high temp circuit , exhaust turbocharger lift side , cylinder head complete , servo-locker , plug - in board , wiring harness for on-engine sensor , shaft

CTN :45333118

16 Jun, 2026 280

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of screen , o ring , flow restrictor , flanged fitting , flange segment , pipe clamp half , sleeve , plug-in-board , cover , o ring 4x2mm , elbow , turbine wheel , integrated circuit eeprom not adjusted , spacer ring , pipe clamp half , dc solenoid , retainer , o ring , bushing , cable entry , plug-in board , o ring , plug , ring sealing a18x22 , plug in board , plug-in board , spacer sleeve , washer , flage segment , vent line , sealant , drain line , flange , techometer , o-ring , pressure plate , v -belt kit , spring retainer , cinical spr. washer , drain valve , gasket , retainer , washer , washer , mfb 1 , plug-in-board , o ring , plug-in board , o ring 32x4 , plug-in-board , modular system , measure/monitor mod , adaptor , quick-disconnect cpl , screw , screw , screw m10x30 , cover , cylinder roller bearing , plug , non return valve , plug in board inb2-01/a , plug-in board , plug , monitor screen lcd tft 19 , screw , washer , sealing ring , hex nut , sealing ring , screw-fitting union , intermediate plate , exhaust bellows , bolt hex a3c , spring , duct plate , washer (000433013000) , dial indicator , washer , bearing huosing , plug-in board , incadescent lamp minimum 10 pcs , exhaust turbocharger , flap , bracket , sleeve , valve , incandescent lamp , threaded pin , lamp t6 , 8-36v/50ma , bushing , computer hard disc 2.5 60gb not adjuste , piston ring , plug-in-board , centering element , threaded rod , retainer , threaded bushing , plug-in-board not adjusted , pipe clamp half , spacer bushing , retainer , camshaft , spring washer , belt pulley , strap , retainer , spacer bushing , grommet , support , mounting plate , pipe clamp half , bearing huosing , ring carrier , screw , o ring 100x4mm , adaptor , eprom mem5 mcu pps cps adjusted , con rod bearing size 0 0 , eprom mem5-02 a 740676 programmed , washer , elbow , plug in pipe , plug-in board rob1-01 a , elbow , sealing ring , elbow , test service unit , o-ring , drain line , o ring , vent pipe , hexagon screw , bib 1 , screw , o ring , guard plate , plug in board , base plate , nozzle element

CTN :45332672

05 Jun, 2026 5.00 Lacs

Rajauri - Jammu And Kashmir

Tender For supply of nozzle , hydraulic head assy , supply pump , cam plate assy , drive shaft , cross disc assy , roller assy , timing device piston , kit , spacer ring , fan belt , gear lever kit , rear view mirror chrome , oil filter , fuel filter , air filter , brake pad , gasket cyl head , oil filter assy , air filter assy

CTN :45347533

06 Jun, 2026 54.6 Thousand

Dehradun - Uttarakhand

Tender For supply of cam plate , roller , t d piston , distributor head , part set of seals , injector assy fuel , horn assy high , hinge door upper rh , field coil assy , repair kit for accesories wiper , centre bolt , brake pad r808 , plate clutch disc clutch , armature assy , rep kit-pinion , assy main cable set front to tail , regulator vehicle window

CTN :45308681

15 Jun, 2026 NA

Srinagar - Jammu And Kashmir

Tender For stage/rate contract for supply of key material/equipments required for operation/maintenance of 33kv lines and 33/11-6.6 kv receiving stations valid for the financial year 2026-27 or till finalization of next stage contract - power transformers, supply of transformer oil as per is: 335-1993 with latest amendments thereof, supply of buchhloz relay for 33/11-6.6 -6.6 kv transformer protection (10mva / 6.3 mva/ 5mva) as per is 3637:1966, supply of winding temperature indicator (wti) for 33/11-6.6 kv power transformer (10 mva / 6.3/ 5 mva ) as per relevant is 5561 standard., supply of oil temperature indicator (oti) for 33/11-6.6 kv for power transformer (10 mva / 6.3/ 5 mva )as per relevant is 5561 standard., supply of cork sheet 6 mm as per relevant is 5561 standard., supply of old sarees/dhoti cloth, supply of gaskets suitable for power transfomers, 33kv ct&pt, supply of 33/11-6.6kv power transformer (10/6.3/5 mva)bush rods with copper washers as per relevant is 3347 standard., hv side, lv side, supply of 33/11-6.6kv power transformer (10/6.3/5 mva)bushes as per relevant is 3347 standard., hv side, lv side, supply of 11 kv spout bushes (indoor type) conforming to relevant standards ammended up to date, supply of mechanical plunger (conforming to relevant standards ammended up to date ) for, 11 kv breakers (both incoming & outgoing), 33 kv vcbs both indoor & outdoor type, supply of 11 kv partition insulators/ bushes with inbuilt studs of required size conforming to relevant standards ammended up to date as per directions of site engineer, supply of dc connector for 11 kv panels conforming to relevant standards ammended up to date, supply of breather conforming to latest is 3202 (ammended up to date) for 10mva/ 6.3mva/ 5/ 3.15 mva., supply of silica gel as per is :3202, supply of o-ring oil sealing of sizes for power transformer bushes (hv/lv) as per is 3202., supply of galvanised iron angle/channel/flat per is :2062 grade "a" of sorts and sizes, g i channel 100x50x50x6 mm, g i channel 75x40x40x6 mm, g.i angle iron 65x65x6 mm, g.i angle iron 50x50x6 mm, g.i flat iron 40x6/ 50x6 mm, supply of arching horns (set of three pieces) for power transformer, supply of g.i bolt full thread of sorts and sizes with washers and nuts of different sorts and sizes, supply of 33kv current transformer (3-core) of reputed make,outdoor oil cooled, single phase (comprising of 3 no.) (as per is 2705 -1992 having ratio of is (is 2165, is 2705(i-iv), is 2099, is 5621, is 2071, is 335, is 13947(part i), iec 185,iec 270, iec 44(4), iec 171, iec 60, iec 8263, iec 815, indian electricity rules 2010), 400-200/5-5-5 a, 300-150/5-5-5 a, 250-125/5-5-5 a, 200-100/5-5-5 a, supply of 11 kv c.t.(2-core/3-core) of reputed make suitable for 11kv vcb panels (comprising of 3 no.) as per is (is 2165, is 2705(i-iv), is 2099, is 5621, is 2071, is 335, is 13947(part i), iec 185,iec 270, iec 44(4), iec 171, iec 60, iec 8263, iec 815, indian electricity rules 2003) having ratio:-, 800-400-200/5-5a, 750-375-187.5/5-5a, 600-300-150/5-5a, 400-200-100/5-5a, 200-100/5-5a, 150-75/5-5a, 100-50/5-5a, 50-25/ 5-5a, 33kv and 11kv outdoor type potential transformer, supply of 33kv potential transformer (comprising of 3 no.) of ratio 33kv/ 3 / 110v / 3 ,single phase,outdoor oil cooled, dead tank type pt as per is:3156 -1992, supply of 11kv potential transformer 11kv/ 3 / 110v / 3 three phase box type (combo unit) as per is :3156-1992, supply of 11kv potential transformer (comprising of 3 no.) 11kv/ 3 / 110v / 3 single phase seperate type as per is :3156-1992, 11kv and 33kv vcbs, supply of master trip relay 24-50 v rel 615 abb ied suitable for 11kv vcb switch gear panels (compitable for electric feild, pascal, scheinder, abb, essan l&t or any other equilant make), supply of digital protection relay adr 141c, rel 615 /abb ied,model no. er113 2 o/c + 1 e/f with high trip (mit113), auxiliary voltage = 0-36 volt conforming to iso 9001:2008 standards (compitable for electric fe

CTN :45316030

06 Jun, 2026 4.90 Lacs

Giridh - Jharkhand

Tender For so(enm)/grd/e-nit/26-27/12 dtd- 25.05.2026 - complete repairing and maintenance of one (01) no. 1000gpm, 150 mtr. head, 150/200 ipb x 3chrs, wilo pump (mother & platt make) (sl. no.- 81316960/10/8) pump assembly of giridih area, machining charges of pump shaft with new key way, threads, bearing seats for above pump (without material), gun metal 2nd & 3d stage impeller new making as per sample with key ways., gun metal suction impeller repairing by both side color brass buildup and machining as per required std size., key new making for impellers., cast steel metal shaft sleeve new making for de & nde, c.i. casting neck ring new making., c.i casing neck bush new making., old neck rings and neck bushes opening, cutting and new neck ring and bush fitting with drilling, tapping and fixing csk head., c.i casting diffuser new making as per sample with casting., chamber body over size boring with alignment for fixing o/s new diffuser, chamber & diffuser locking & fixing with each other., chamber & diffuser neck ring & neck bush seat machining on lathe machine with body alignment checking, facing, gun metal casting balance valve new making, gun metal balance disc seat increasing, machining, drilling, counter hole making, sizing., roller bearing nu-313 new provide., pump body bolt new making as per sample with double nut., repair kit like as gasket packing, "o" rings, rubber joint packing, waterdeflector, oil rings, test cork, bye pass pipe line, cooling ring. gland studs., complete pump assembly dismantling and re-assembling & setting.., total impact of gst for the purpose of ctc

Flat Iron Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others