Latest flexure testing machine Tenders | Government flexure testing machine Tenders

State Government

CTN :45274161

01 Jun, 2026 12.50 Lacs

Chhindwara - Madhya Pradesh

Tender For supply of laboratory equipment and others materials for existing, accredited district water testing distt. laboratories of division chhindwara - external calibration of laboratory equipment refrigerator/ , visi cooler rtd probe with sensar, glass thermometer, thermometer, wet and dry , thermometer, balance, analytical weight box,ph meter, tds meter, turbidity meter through iso/iec 17025:2017 accredited calibration laboratory with calibration certificate , smart uv-vis spectrophoto meter; 2206 touch screen uv-vis spectrophoto meter, wavelength range 190-1100 nm, accuracy + 1.0 nm, resolution 1.0 nm, bandwidth 1.0 nm. cuvette holder 50 mm path length. with display, with two years amc. with calibration certificate of control of absorbance, resolution power, limit of stray light. light source xenon flash lamp/tungten lamp/ deuterium lamp. to be supplied with 2 pairs of quartz cuvette. size 10 mm. including cost of supply, installation & training to lab staff for making graph of iron, nitrate, flouride, maganese test at nabl accredited lab with certificate. (nabl ceritified) make systronics , color comprator for color analysis , hot plate: rectangular body- heating upto 300'c are fitted with insulated elements. workable on 220/230 volts a.c. surface with cast iron top 300x450x150 mm rating 2 km with digitally , bacteriologycal incubator (memmert type with digital controllar): double walled, outer made of gi/ms powder coated. element of three sides' ss chamber digitally controlled temp. range 5'c above rt to 70 c + 0.5'c fitted with fan having double viewing sindow, supplied with shelves workable on 220/230 volts a.c. size 455x445x455 mm deluxe model with nabl certificate , ion meter versastar banch top modal (ph/ise)with flouride combination, epoxy body electrode with range form 0.01 mg/l ph ross electrode bnc connector, power syplly card opration manual, usb cable, universal ac power adaptor 90-260v ac electrode holding stand, stirrer (1) one pack flouride filling solution 475 ml (2) flouride standard 100 ppm 475 ml solution (3) flouride electrode storing solution 475 ml x 2 no (4) tisab iii solution 475 ml x1 including cost of supply, installation & training to lab staff for making graph of iron, nitrate, flouride, maganese test at nabl accredited lab with certificate. (nabl ceritified lab) , fluoride electrodes (combination fluoride electrode epoxy body with bnc connector) thermo orien -960913 nwp , monoquartz distillation unit-3362 dist. water output cap. (approx) 4.0 lt.hr/ electrical requirements 230-250 volts single phase 3.5x 2kw quartz heater/minimum cooling water requirment 2.5 lit/ min (ea)/ biological activity pyrogen free/ conductivity s/cm <1 x 10-6/ distillate temp 65-75'c , plate colony counter model no. cc-100 220 woult 1 year worenty measurement range 0 to 999 semi autometic precise colony counting metal plastic , laboratry refrigerator rlr-300 cooling type frost free temp. rang 2'c to 8'c glass dour 1, width 584, depth 584,hight 1702,220-240 woult 50 hz singal face , sampling bottel capicity 1 itr , membran filter assembley 5360 all galss filter holder 47mm filtretion assembley made for borosilcate glass with filter base capicity-21tr , spare for all glass filter holder 47mm dai capicity 2000ml for filter holder . tissu paper roll 3 layer

CTN :45136895

29 May, 2026 NA

Jamalpur - Bihar

Tender For supply, installation, testing and commissioning of spare parts for transformer oil filtration machine (model -toft-030-d), machine serial no. cbs/10-22/1419, make - cbs technologies pvt. ltd. as per attached annexure - fine filter (1 micron), coalesces filter (30 micron), course filter (50 micron), activated alumina, vacuum oil, o ring set for overhauling machine (for flanges, magnetic strainer, filter chambers and irc chamber), oil seal for pump, vanes kit of vacuum pump sp65a, filter kit of vacuum pump sp65a, sealing kit of vacuum pump sp65a, solenoid valve 15 nb, air filter

CTN :45304313

15 Jun, 2026 NA

Gurdaspur - Punjab

Tender For providing laying cutting testing of sewer rcc np 3 with hdpe lining and rising main d i k 9 pipe const m h chamber hatch box mps and survey design supply and soil testing const inst comm of 20 mld stp cum 60 kld fstp including operation and maintenance gurdaspur

CTN :45304316

15 Jun, 2026 NA

Gurdaspur - Punjab

Tender For prov and supply laying cutting testing comm of w s di k 7 k 9 pipe line with h c install of t w const of inspection chamber pump house sluice valve fire hydrant haudies including dismantling and reconditioning of roads in gurdaspur under uidf scheme

CTN :45206242

01 Jun, 2026 25.00 Lacs

Nagaur - Rajasthan

Tender For supply of lab testing and other hospital use items for dh khinvsar - item discreption, gynee ot table, examination table (two fold), ot light (single dome), ot light (mobile), suction imp machine, fetal doppler, laryngoscope (pedia), sims speculum (set of 3), vulsellum 10", sponge holder 10", uterine dilator (all sizes), needle holder 6", ambu bag (infant), o2 cylinder (small), o2 cylinder (big), o2 cylinder (a/b type e), full s.s. cart, forceps delivery set, lscs set, d&c set, hysterectomy set, mayo scissors 6", artery curved 6", towel clip 5", doyen retractor, deaver retractor large, tray instrument 8x10, kidney tray lg, bowl surgical, formaline chamber 20cm, fogger machine, instrument trolley 18x24, drum skf 11x9, drum skf 12x15, cidex tray 22", laryngoscope adult, fowler bed, autoclave top, fumigator machine 5l volume, stretcher trolley, ot table double dome light, b.c unit, boiler, cautery machine, foot step, ambu bag adult, iv stand, fowler bed (additional), right angle retractor (all sizes), myoma screw, defibrillator, multipara monitor, makintosh sheet, boyles apparatus, implant removal set, osteotome curved (large), osteotome curved (medium), osteotome curved (small), periosteum elevator (medium curved), bone drill machine (big), bone drill machine (small), k-wire cutter, hammer (large), hammer (medium), bone nibbler curved (large), bone nibbler curved (medium), plier, jumbo cutter, screw driver 4.5 (medium), screw driver (large), screw driver 3.5 (medium), screw driver 2.5 (small), periosteum stat, t-handle, plaster cutter (electric), plaster cutter (manual), x-ray view box, bone holding forceps (small), bone holding forceps (large), ot gown dr plain, plastic apron, ot hole sheet (3x3), ot plain sheet (3x3), tbw, k-wire cutter, reamer set, cannulated drill/screw, ot linen, electric tourniquet machine, nerve stimulator, general instrument set, s. mask bandage 6", s. mask bandage 4", 90 retractor extra, vac (vacuum) machine, dvt pump, self retaining retractor, bone curette (curved), bone chisel, screw driver 4.5, screw driver 3.5, autoclave triple valve

CTN :45208899

26 May, 2026 25.00 Lacs

Jaipur - Rajasthan

Tender For supply, installation, commissioning of machinery and equipment of food testing labouratory for common incubation centre at krishi upaj mandi samiti f and v terminal market muhana jaipur - hot air oven (as per description enclosed annexure vii), digital abbe refractrometer & moisture meter (as per description enclosed annexure vii), moisture balance (as per description enclosed annexure vii), analytical weighing balance (as per description enclosed annexure vii), digital ph meter (multi parameter) (as per description enclosed annexure vii), silica crucible (as per description enclosed annexure vii), muffle furnance (as per description enclosed annexure vii), fully automated fat extraction system (as per description enclosed annexure vii), automatic kjeldahl nitrogen /protein analysis system(as per description enclosed annexure vii), automatic crude fibre analysis system (as per description enclosed annexure vii), autoclave (as per description enclosed annexure vii), laminar air flow chamber (as per description enclosed annexure vii), microbiological incubator (as per description enclosed annexure vii), gun thermometer(as per description enclosed annexure vii), glassware(as per description enclosed annexure vii)

CTN :45292731

12 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For supply of fabrication, supply and testing of water-cooled tri-arc melting furnace system with uhv chamber and

CTN :45298008

11 Jun, 2026 NA

Parganas - West Bengal

Tender For supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , supply and fixing on load change over switch ss enclosure complete with capacity 200 amp, 415 volt, 4 pole, 50 hz. , supply and fixing sheet metal enclosure spn db double door having facility to fix mcb spn as incomer and mcbs as outgoing, spn 4 ways, ip-43 , supply and fixing sheet metal enclosure tpn db double door having facility to fix mcb tpn as incommer and mcbs as outgoing tpn 4 ways, ip-43 , supply and fixing bus bar chamber 100 amp, 4 way, 415 volts enclosurre is made from crca sheet of thickness 3.15mm crca sheet cover , supply and fixing of straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade nominal cross sectional area not exc.50 sqmm, 3.5 by 4 core , supply and fixing straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade cross sectional area 240 sqmm to 300 sqmm, 3.5 core. , supply and fixing end termination epoxy cable joint kit including jointing materials for making joints of ug electric cable 1100 v grade nominal cross sectional area 240 sqmm to 300 sqmm, 3.5 core , supply and fixing of galvanised iron pipe 100 mm bore dia light grade for protection of ug cable , supply of digging nad layingg in excavation trenches not exc. 1.50 m wide and not exc. 1.50 m in depth, complete all as specified and directed. , returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 250 mm in soft loose soil , supply and fixing of galvanised iron pipe 40 mm bore dia light grade for protection of ug cable , supply, installation, commissioning and testing including providing all necessary electrical connection,lt feeder panel board of size 1.0 m x 0.6 m x ) /bid number : gem/2026/b/7568567 * /dated: 22-05-2026 & & / bid document 1 / 30 & & ' ' /item category 0.5 m , supply, installation, commissioning and testing including providing all necessary electrical connections lt feeder panel board of size 0.6 m x 0.6 m x 0.5 m , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick.complete all as specified and directed in boq spec file , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick. complete all as specified and directed in boq spec file , supply and fixing of sub-class b brick, well burnt, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for ug cable protection, complete all as specified and directed. , supply and fixing horizontal boring under a depth of 0.65 m from the gl for passing pipe upto 40 mm bore dia , supply of digging and laying of removing excavated materials soils not exc. 50 m and depositing where directed at a level not exc.1.50 m , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 300 sqmm including bricks, gi pipes etc. , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 50 sqmm 3.5 core including bricks, gi pipes etc. , supply of digging and laying of sand cushioning dry in trenches for protection of ug cables below, above and around the ug cable laid in trenches of 230 mm spread thickness , cutting road by hard standing and making good disturbed surfaces by using pcc type-c2,1-3-6 by using 40 mm graded stone aggregate , boring of holes under road,pavement,hard standing by trenchless technology using ultra sounding technique including hdpe pipe 150 mm dia suitable for 0.4 mpa working pressure , cutting chases, chipping in making good to facings, where required and pointing in cement mortar 1- 3 to ends or edges of landings, steps, sills, sunshades, shelves, lintels etc. , submain wiring comprising single core 2 runs of 6 sqmm nominal coss sectional area frlh multistran

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

State Government

CTN :45276176

08 Jun, 2026 1.27 Lacs

Vidisha - Madhya Pradesh

Tender For supply instaling testing and commissioning of 01 nos split type ac 1.5 ton at commissioner office at commissioner banglaw, ee pwd br narmadapuram chamber, se pwd br narmadapuram chamber narmadapuram dist narmadapuram

Flexure Testing Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government