Latest flitch plate Tenders | Government flitch plate Tenders

Central Government/Public Sector

CTN :42848464

03 Dec, 2025 NA

Multi City - Tamil Nadu

Tender For auction sale of metallic - general scrap (ms ferrous consisting of heavy & light melting structural steel, ms drums,wire mesh fabricated structures, pipes, beams & angles with or without attachmenty of any other material, witout sorting & segregation.

CTN :42992282

10 Dec, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of supply and constr of ug store shelter barrel type d d - supply and erection of complete structural stores for 01 x ug store shelter barrel type , supply of complete construction material for 01 x ug store shelter barrel type , supply and erection of complete necessary electrical items for 01 x ug store shelter barrel type , supply and erection of complete necessary miscellaneous items required for installation of 01 x ug store shelter barrel type , supply and installation of 01 x ug store shelter barrel type , cost of iit oblique nit vetting , cost of construction

State Government

CTN :42968642

08 Dec, 2025 10.77 Lacs

Goa - Goa

Tender For the work of replacement of deteriorated structural material at 33 11 kv corlim substation under sub div i corlim div i panaji

CTN :42970962

04 Dec, 2025 NA

Raigad - Maharashtra

Tender For deployment of 100 mt tyre mounted crane for erection of fabricated structural steel material on monthly hire basis

State Government

CTN :42919406

03 Dec, 2025 NA

Karur - Tamil Nadu

Tender For structural and sheeting work for environmental monitoring unit area (70 sq.m) and wind barricade near raw material storage shed (80 sq.m) at tnpl lsfm cement plant

Central Government And Public Sector

CTN :42931538

16 Dec, 2025 NA

Damanjodi - Odisha

Tender For supply of e 121216 structural steel d d--1 . 92101016080 as per is2062-2006grade designation e-250quality asize 65x 65x 6 mmminimum length 6 mtrmanufacturer test certificate shall be supplied with the material. , 2 . 92106035350 m. s flatsize 25mm x 4 mmleength 4 - 6 meters. , 3 . 92115004080 tor steel size 12 mmreinforcement steel hysd fe 500 grade as per is 1786-2008. manufacturer test certificate shall be supplied with thematerial. , 4 . 92115002080 tor steel size 08mmreinforcement steel hysd fe 500 grade as per is 17862008. manufacturer test certificate shall be supplied with thematerial. , 5 . 81808001020 hot dip g. i wire 6 swg 5 mmapplication-overhead transmission line earthingtensile properties-hardtensile strength in mpa550-900mpa , 6 . 92105008030 ismc 150 x 75structural quality channel ismcsize 150x75 mmas per is20622011grade designation e-250 quality incha inch. , 7 . 92105003080 ismc of size 100mm x 50mmas per is 20622011 e-250 gradeadimensions as per is 8081989length- minimum 6 metersmanufacturers , 8 . 92101020180 structural steel angle isa 50 x 50 x 6mmas per is 20622011 e-250 gradeadimensions as per is 8081989length- minimum 6 meters , 9 . 92101025060 structural quality angle isasize 90 x 90 x 6 mmas per is2062-2011grade designation e-250 quality incha inch. , 10 . 92106002000 structural quality m. s. flatas per is2062-2006grade designation e-250 quality asize 25x 6 mm minimum length 6 mtr , 11 . 92108033530 m. s. plate szthickness of 1. 6mm is-226min dimension 2500 mm x 1000-1250 mm x 1. 6 mm l w tapprox length andwidth , 12 . 35106002010 gi ladder type cable tray shall be made out of width 600 mm height 50mm and 2 mm thick , 13 . 92106035110 g. i. flat 40 x 6 mmgi flat size - 40 x 6 mm galvanised as per is 2633 by 1986 and 2629 by 1985 , 14 . 92101020250 as per is20622006grade designation e-250quality asize 65x 65x 6 mmminimum length 6 mtrismc , 15 . 92108015020 m. s. plate 16 mm thick x length 6000mm x width-2500 mmas per is 20622011 e-250 grade

CTN :42620789

04 Dec, 2025 NA

Dibrugarh - Assam

Tender For corrigendum : construction of equipment room at nrl rt - civil, structural & architectural, earth work in excavation (refer specification no. c-spc-103), earth work in excavation below ground level for all kinds of works in all types of soils except soft rock and hard rock as classified in specification for a depth upto 1.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting., for depth beyond 1.5m and upto & inclusive of 3.0m., earthwork in filling by excavating the earth from borrow areas arranged by contractor for all leads, transporting the earth from borrow area including cleaning & stripping the earth at borrow areas, breaking clods, loading, unloading and laying at all depths and heights in layers of thickness not exceeding 15 cms., watering, rolling and ramming by manual methods/mechanical compactors to achieve 90% of the maximum laboratory dry density, dressing, trimming, levelling the top surface etc. in foundations, plinths, trenches etc. all complete., backfilling after execution of the work to proper grade and level with selected materials from available excavated soil from spoil heaps, including re-excavating the deposited soil excavated earlier, breaking clods, laying at all depths and heights in layers of thickness not exceeding 15 cms. watering, rolling and ramming by manual methods/ mechanical compactors to achieve 90% laboratory maximum dry density, dressing, trimming etc. in foundations, plinths, trenches, pits etc. all complete., transporting and disposing the surplus earth and debris including shrubs and vegetations from construction area to areas anywhere outside the plant boundary including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. for carting on the basis of truck measurements (volume of truck reduced by 30% for voids) disposal area s outside plant boundary to be arranged by the contractor .royalty as applicable for disposal outside plant limits to be borne by the contractor., plain & reinforced cement concrete (refer specification no. c-spc-104), providing and laying plain cement concrete for all depths below and upto plinth level in foundations,drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete of nominal mix 1:5:10 by mass (1 cement: 5 coarse sand: 10 crushed stone aggregates/gravels) with 40mm and down size graded crushed stone aggaregates/gravels.(all materials including cement supplied by contractor at their cost), providing and laying reinforced cement concrete of m-30 grade with 20mm and down size graded crushed stone aggregates/gravel in sub-structure of all types e.g. foundations, footings, raft, beams, slabs, pile caps, retaining walls, jambs, counterforts, buttresses, trenches, manholes,pipe encasement, catchpits, drains, rcc pits, equipment/machine foundations, pedestals, pipe sleepers, columns, plinth beams, suspended floors, beams, staircases, landings, steps, brackets etc. (including single pour concreting upto 250m3), including cost of admixtures if used,providing pockets, openings, recesses, chamfering etc., wherever req

Central Government/Public Sector

CTN :42917458

15 Dec, 2025 1.04 Crore

Kanyakumari - Tamil Nadu

Tender For installation of irms in msp - rcc foundation as per the scope of work in phase i and phase ii., supplying, fabrication, erection and painting of ms steel structural as per the scope of work and drawing. (structural steel conforming to is 2062:2011 of make jindal/essar/tata/ sail/rinl)., supplying of material, shifting and installation and painting of equipments, bucket elevators, conveyors and accessories, etc as specified in the tender specifications and scope of works specified in the tender., dismantling of steel structural as per the scope of work, dismantling of rcc foundation, dismantling of exolon magnetic separator with accessories.

corporations/Associations/Others

CTN :42901527

10 Dec, 2025 13.86 Lacs

Kutch - Gujarat

Tender For remediation work of legacy waste by supply, installation and commissioning of fully automated segregation trommel of minimum 200 tonnes per day (tdp) capacity for processing and bio-movement of wast/fresh wast, also providing required machineries and vehicles for movement of waste and recycled material such as but not limited to jcb, dumper, hyva, pocklain, bailing, fatka, shredder, etc. including providing as required site in-charge, supervisor, operator and labour and oandm of plant and machineries for (legacy waste/fresh waste) procesasing facility at rapar for rapar nagar palika, rapar with procurement of necessary all machinery/ equipments along with erection, testing and commissioning of waste process facility, construcion of basic infrastructure, civil and structural work with labours, operators etc. required for waste processing partial system for segregation and conditioning, necessary plot development, inert to be disposed off at designated place of chm area within 2.00km radius along with the operation and maintenance for 01 year. (the tripping fees will be considered and provided on the basis of weight of produced materials from processed municipal solid waste). (i.e. output quantity is equal to input quantity - untreated quantity).

Central Government And Public Sector

CTN :42881969

03 Dec, 2025 NA

Thane - Maharashtra

Tender For supply of structural steel material -ss channel 75 mm x 40 mm , ss channel 100 mm x 50 mm , ss channel 150 mm x 75 mm , ss equal angle 50 mm x 6 mm , ss equal angle 75 mm x 6 mm

Flitch Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government And Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government And Public Sector