Latest float glass Tenders | Government float glass Tenders

State Government

CTN :45475453

10 Jun, 2026 3.00 Lacs

Kota - Rajasthan

Tender For supply of sanitary and joinery items to government quarters located in civil lines. - wire nails, coarse sand (zone iii), fine sand (zone iv), portland cement, oxidised mild steel butt hinges 125x65x2.12 mm, oxidised mild steel butt hinges 100x58x1.90 mm, oxidised mild steel butt hinges75x47x1.70 mm, chromium plated brass handles 125 mm with plate 175 x32 mm, chromium plated brass handles 100 mm with plate 150 x 32 mm, stainless steel butt hinges 125x64x1.9 mm is : 12817 marked, stainless steel butt hinges 100x58x1.9 mm is : 12817 marked, stainless steel butt hinges 75x47x1.8 mm is : 12817 marked, stainless steel butt hinges 50x37x1.5 mm is : 12817 marked, oxidised mild steel tower bolt (barrel type) 150x10 mm, oxidised mild steel door latch 300x20x6 mm, oxidised mild steel door latch 250x20x6 mm, oxidised mild steel screws 50 mm, oxidised mild steel screws 40 mm, oxidised mild steel screws 30 mm, oxidised mild steel screws 25 mm, oxidised mild steel screws 20 mm, glue, ms hold fast, white cement based putty, g.i. limpet washer, bitumen washer, g.i. plain washer thick, c.i. grating 100x100 mm, indian type white glazed vitreous china ist quality w.c. orissa pan size 580x440mm., brackets, low level flushing cistern of 10 litres capacity : pvc with pvc bend as per is : 7231, m.s. clamps, european type white glazed vitreous china ist quality w.c. pan, wvc (10 litres) low level flushing cistern cover only., g.i. tees (equal) 25 mm, g.i. union 15 mm nominal bore, vitreous china flat back wash basin size 510 mm x 440 mm, c.p. brass waste coupling 32 mm, magenatic catcher double strip horizontal type., mortice lock of approved make godrej or equivalent with pair of cp handles, almirah lock of approved make godrej or equivalent, ss waste coupling 125 mm, p.v.c waste pipe with c.p nut 32 mm, p.v.c waste pipe with pvc nut 32 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm)., hydraulic door closer bottle type m.s. body with necessary accessories and screws complete, 6 mm thick commercial ply, 9 mm thick commercial ply, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, flexible (coil shaped) pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, u-pvc pipes (working pressure 4 kg / cm^2) single socketed pipe 75 mm dia., u-pvc pipes (working pressure 4 kg / cm^2) single socketed pipe 110 mm dia., upvc coupler for upvc drainage pipes 75 mm, upvc coupler for upvc drainage pipes 110 mm, upvc bend 87.5o 75 mm bend, upvc bend 87.5o 110 mm bend, upvc plain shoe 75 mm bend, upvc plain shoe 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, c.p. brass bibcock 15 mm, c.p. brass long body bibcock 15 mm, c.p. brass angle valve 15 mm, 15 mm ptmt bib cock, p.t.m.t. bib cock with nozzle 15mm, 15 mm ptmt bib cock long body with flange, 15 mm dia ptmt stop cock (male thread), ptmt pillar cock, ptmt ball cock 15mm complete with epoxy coated aluminium road & h.d. ball, ist qulality mat and glossy finished ceramic tiles size : 300mm x 450mm, ist quality heavy duty vitrified polished digital tile size:600mmx600 mm, ceramic mat finished tiles ist quality size 300 mm x 300 mm in white, gray, ivory, fume red brown, light green, light blue and other light shades, 15 mm nominal bore and 30 cm length pvc connection pipe with p.t.m.t. nuts, 15 mm nominal bore and 45 cm length pvc connection pipe with p.t.m.t. nuts, stainless steel screws 50 mm, stainless steel screws 40 mm, stainless steel screws 30 mm, stainless steel screws 20 mm, premium quality water closet seat cover solid pvc (isi marked) grade-i white for ewc, premium quality low level flushing cistern of 10 litres capacity pvc with pvc bend as per is : 7231, hydraulic seat cover for europeon wc, premium quality two way bib cock with wall flange, tooth paste & brush holder c.p. brass (heavy and superior quality.), stainless steel kitchen s

State Government

CTN :45478262

13 Jun, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate(including gst and cess) for implementation of different scheme under mgnrega at khoyrasole dev. block and 10 nos of gp under khoyrasole dev. block for the year 2026-27 - mgnrega materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, brick bats, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less litrethan 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 litre gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, stone dust, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, wire mesh (rabbit), diesel oil, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia, g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, r.c.c. pipes np2 class 250 mm dia, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 600 mm dia, r.c.c. pipes np2 class 900 mm dia metre, r.c.c. pipes np2 class 1000 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm intel 100 mm dia, vitreous china squatting plate urinal, h.p. or l.p. ball valve with polythene floats: 15 mm dia, h.p. or l.p. ball valve with polythene floats: 20 mm dia, h.p. or l.p. ball valve with polythene floats: 25 mm dia, brass full way valve with c.i. wheel (screwed end) 25 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rests 250x125x25 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body each, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type), circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal te

CTN :45494128

19 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of rotational moulded polyethylene water storage tanks (v3) conforming to is 12701 (q3) , bathroom or toilet mirror (v3) (q4) , plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763 (q3) , copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , copper alloy gate valve for waterworks purpose (v2) conforming to is 778 (q3) , plain glass 8 mm thick 3feet by 4feet , bib cock cp 15mm two way , glass sheet plain 4mm thick, 3feet by 4feet , plate rack steel 24inchby30inchby10inch , seat cover plastic for ewc with cp fitting white , gi wire mesh 1200 width 15 mtrs each roll , plate rack steel 31inchby36inchby10inch , bib cock cp 20 mm , hydrolic door closer , health faucet ss body with 8mm dia 1m long , peg set ss , glass putty , gi tubing 100 mm med gde , float valve pvc 20 mm with pvc float , glass corner 11 x11x14.50 inch , pvc lidobliquecover for tank 1000ltr capacity , sweveling shower rose 15 mm , curtain rod bracket cp 20 mm dia , gi tubing 40 mm med gde , float valve pvc 25 mm with pvc float , door stopper , steel curtain rod rails 12feet x 20mm dia , wash hand basin 55inchx40inch , sluice valve 100mm , aluminium door handle 125 mm , 50 mm nb gi tubing , al sliding door bolt 200mm , fevicol , al sliding door bolt 150mm , door seal 1.0m botton door air gap , sink coupling waste , aluminium door handle 200mm , stop cock 15 mm pvc , stainless steel grating 125 mm 5inch , pvc connection pipe 600 mm long , tank nipple gi 20mm , gi plug 20mm , gi tee 15mm , silcon sealant 280ml tube , paint synthetic enamel black , gi union 20 mm , elbow gi 25mm , door seal 1.2m botton door air gap , gi socket 25 mm dia , 25 mm nb gi tubing , 20 mm by 15 mm reducing elbow , 20 mm dia gi socket , 20 mm dia by 100 mm long gi nipple , two way bib cock brass chromium plated fancy type 15mm bore

Corporations And Associations And Others

CTN :45414096

10 Jun, 2026 1.67 Lacs

Multi City - Haryana

Tender For special repair of ashiana scheme flats 560 d/us (phase-i) in sector-47, gurugram. renewing glass panes, with putty and nails whereever necessary racking out the old putty (float glass panes of nominal thickness 4mm in ashina flats sec-47, gurugram - : .special repair of ashiana scheme flats 560 d/us (phase-i) in sector-47, gurugram. renewing glass panes, with putty and nails whereever necessary racking out the old putty (float glass panes of nominal thickness 4mm in ashina flats sec-47, gurugram a/c rs. 1.68 lakh

State Government

CTN :45425974

19 Jun, 2026 6.86 Lacs

Jaipur - Rajasthan

Tender For supply of miscellaneous t and p hardware and consumable fitting fixtures etc. for corrective maintenance to jmrc - non bsr items, aerolite 450gm (epoxy rasin and hardner adhesive make araldite/aerolite/loctite/bondtite), anchor fastener (10 mm), anchor fastener (6 mm), angle valve / brass dish angle valve stainless steel finish, araldite tube (180 gms) (epoxy rasin and hardner adhesive make araldite/aerolite/loctite/bondtite), bend nose pliers, big disc brass spindle 3/4", black screw 1 inch (500 pcs.), black screw 1.5 inches (500 pcs.), professional rotary hammer dril machine (make:bosch gbh 2-26 re or equivalent), brass spindle with rubber washer (04 no.), claw hammer, cp nipple (1 inch), cp nipple (1.5 inch), cp nipple (2 inch), cpvc ball valves 3/4 inches, cpvc socket 3/4 inches, cpvc solvent (20 grm each), curtain pipe (wall fix and hanging support) holder, cylinder 60mm godrej/dorset, cylinder 70mm godrej/dorset, danfoss solenoid valve coil, door closer sliding bar type, door stopper, doorset/godrej(europrofile cylinder lock)(80 mm), double side tape, dr. fixit waterproofing super latex compound (1 kg), electric extension board (10 mtr wire, 3 sockets), electrical tape (steelgrip, 30pcs), feviquick (20 gms) (grade 203), feviquick (20 gms) (grade 463), float switch, gaskit for windows / epdm rubber seal for windows, gi end plug (0.5 inch), glass fibre measuring tap 30 mtr. length, hammer drill bit (10 mm), hammer drill bit (12 mm), hammer drill bit 6mm, hammer drill bit 8mm, hasp staple (latch)(100 mm), hasp staple (latch)(80 mm), heavy duty stainless steel lock for glass door thickness 10 mm to 12 mm, hex head self-drilling roof screws with rubber sealing washer 12x65mm (200 pcs.), holdtite (50 grm each), hydraulic door closer (isi mark), key hive locks (drawer lock), l patti (2 inch), l patti (4 inch.), l patti (5 inch), metal disc cutter blade (04 inch), mortise lock 70mm complete, m-seal 90/100gm, nose plier, pad lock, pipe wrench 18", pu dotted hand gloves (make udyogi or equivalent), pvc green carpert mat 12mm thick 1200mm x 750mm, pvc safety gloves size large, pvc solvent (100 grm each), retro reflective tape 3m make (50 mtr.), ro cp nipple, round casing clip (100 pcs.), screw bit, screw driver, screw extractor set, self taping (hexa head)(02 inch) (100 pcs.), self tapping screw (6-8mm top dia) 13 mm, self tapping screw (6-8mm top dia) 19 mm, self tapping screw (6-8mm top dia) 25 mm, self tapping screw (6-8mm top dia) 38 mm, self tapping screw (6-8mm top dia) 50 mm, self tapping screw (6-8mm top dia) 75 mm, self-tapping screw (6-8mm top dia) 6.35 mm, silicon gun, silicon sealent (white/black/transparant ), sliding/telescopic ladder, small disc brass spindle 1/2", stainless steel frame less clamp (both side screw arrangement) (for ss railing glass support), steel measuring tap 5 mtr. length, stone cutter disc (04 inch), taflon tape, thinner, tool bag, tower bolt (6 inch), transparent extra strong virgin mlcl sheet film tirpal (120 to 150 gsm)(50x 30 feet), universal pvc cistern handle with rod, wall plug/screw gitti 38mm, wall plug/screw gitti (32 mm ), wall plug/screw gitti (50mm), wall plug/screw gitti (70mm ), waste pipe, water meter 1" (rahul make), water meter 2" (rahul make), wd-40 (400/420ml), zoloto 32 mm forged brass ball valve 1008b of isi marked

State Government

CTN :45386911

22 Jun, 2026 10.00 Lacs

Delhi - Delhi

Tender For supply of furniture items at special commissioner office, 1st floor, office block 3, east kidwai nagar, new delhi - revolving chair type-1revolving chair- size- h: 1210-1330mm, seat h: 465-585mm, d- 690mm, w- 640mm. executive hi-back chair with bio synchro mechanism spring tention auto adjusted according to weight of body. pu padded seat & pp back with mesh fabric - lumber support in built. head rest with d-direction adjustment. with 3- direction adjustment arm rest. 5-prong nylon base for stability. twin wheel heavy duty castor for easy mobility under load. quality tapestry. high density moulded pu cushion.the item should be from the approved make of durian/ godrej/ hni/ herman miller/ steelcase or equivalent make., executive tableexecutive table- overall size: table - lenght-2100mm x width-900mm x height-750mm, side runner -width- 1200mm x depth-450mm x height-750mm, back runner- width-1650mm x depth-450mm x height-750mm, corner unit - lenght-450mm x width-450mm x height-750mm, 3drawer pedestal size- width-450mm x depth-540mm x height-650mm, table- made of bwr ply wood laminated with good quality mm thk laminate fitted with 25mm thick mdf fascia duly deco painted. door & drawer front made of 18 mm thk bslpb. top of desk and cabinet made of 12mm thk clear float glass. product must be in compliance with drawing and as per architect instruction complete product must be knockdown type in construction.the item should be from the approved make of durian/ godrej/ hni/ herman miller/ steelcase or equivalent make., reception deskreception desk-1500- overall size: - w:1500mm, d:750mm / 832 mm, 1200ht top d:728 mm. top made of 25 mm thick pre- laminated particle board. pvc edge beading of 2 mm edges by through feed machine. provision of cable manager as per l.h. orr.h. side requirement. provide duct for wire management. front covered by l-shape wooden box size-h-1200 mm, w-600 mm, d-300 mmmobile pedestal unit plpb- size: height:650mm, width:400mm, depth:450mm top made of 18mm thick pre- laminated particle board. side, back and drawer front are made by 18mm thk. pre-laminated particle board. metallic finish heavy duty handle. superior quality makes front mounted lock. provision of casters for mobility. special drawer slides for filing drawer. other drawers on roller slides. the item should be from the approved make of durian/ godrej/ hni/ herman miller/ steelcase or equivalent make., workstation on 1 seater with keyboard tray cpu trolly & mobile pedestal drawerworkstation - 1 seater with keyboard tray, cpu trolly & wooden mobile pedestal, overall size- l-1640 mm, d-820mm, h- 1215mm, working h 750mm, top made of pre laminated particle board with pvc edge beading. understructure also made up of pre laminated particle board with pvc edge beading.top- size: - 1500x750x25 mm thk. pre-laminated particle board. side edges covered by 2 mm thick pvc edge beading by through feed machine. 70mm thick tiles base partition- internal frame are made by 1.6mm thk. cold rolled close annealed powder coated sections. tiles are made by 12mm. thk. pre laminate particle board. tiles are also available in glass, fabric and steel option. frame structure are fabricated by mig/tig welding machine. tiles are fitted by high strength pvc dowel in pvc insert with transition fit. provision of slot for cabling and accessories. upper and side trim are 1mm thk. extruded powder coated aluminium section and pole is 1.6mm thick aluminium.mobile pedestal unit plpb- size: height:650mm, width:400mm, depth:450mm top made of 18mm thick pre- laminated particle board. side, back and drawer front are made by 18mm thk. pre-laminated particle board. metallic finish heavy duty handle. superior quality makes front mounted lock. provision of casters for mobility. special drawer slides for filing drawer. other drawers on roller slides.the item should be from the approved make of durian/ godrej/ hni/ herman miller/ steelcase or equivalent make., revolving chair type-2size-

Central Government/Public Sector

CTN :45405161

17 Jun, 2026 NA

Hubli - Karnataka

Tender For supply of double sealed window glass unit for lhb coaches fixed window to rcf drg no. lw 54104 alt i, to size 1117(+/-1) x 697(+/-1)x18.38 mm, with outer glass safety laminated float glass with pvb film and inner glass of toughened as per mdts-089 rev-4 [ warranty period: 30 months after the date of delivery ] ]

CTN :45387996

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply of civil work sanitary fitting and door lock items c c - cp brass telephonic wall mixer , single handle long body basin mixer , 900x900 mm beveled edge mirror of superior glass complete with 6 mm thick , 750x900 mm beveled edge mirror of superior glass complete with 6 mm thick , gun metal gate valve 25 mm nominal bore , cp brass shower rose with 15 or 20 mm inlet 150 mm diameter , cp brass long body bib cock 15 mm nominal bore , cp brass concealed angle stop valve 15 mm nominal bore with spindle , ss towel rail , ss soap disc , glass shelf make by motiguard, hindware , cp hand held health faucet of toilet , cp extension nipple 1 inch , cp extension nipple 1.5 inch , cp extension nipple 2 inch , concealed cistern full accessories like giblet, cover, valve, lock in toilet , float glass panes of nominal thickness 4 mm weight not less than 10 kg per sqm , ss bottle trap for wash basin and sink , cp brass concealed angle stop valve 15 mm nominal bore only spindle , tissue paper holder , urinal censor of approved brand like hindware , godrej mortise lock handle set * /bid number : gem/2026/b/7594056 + /dated: 01-06-2026 ' ' / bid document 1 / 22

State Government

CTN :45363624

05 Jun, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate of meterial items for implementation of mgnrega scheme under rampurhat2 development block - technician, helper (technician), coolie, carriage of tar bitumen, carriage of stone aggregate below 40 mm nominal size, carriage of steam coal, carriage of stone aggregate 40 mm nominal size and above, 1st class picked jhama bricks(traditional), carriage of soling stone & masonry stone, coloured inter locking c.c. paver block, fine sand, silver sand, 1st class traditional bricks (kiln burnt), coarse sand, fly ash bricks(traditional), modular fly ash bricks, modular clay bricks, stone aggregate(single size): 40 mm nominal size, medium sand, water proofing materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, surface vibrator, water tanker 5000 ltr. capacity, carriage of r.c.c. pipes 600,700,750 & 800 mm dia, carriage of r.c.c. pipes 900 mm dia, carriage of r.c.c. pipes 1000 mm dia, carriage of r.c.c. pipes 1200 mm dia, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), welding by electric plant, brick aggregate (single size):40 mm nominal size, moorum, carriage of carriage of moorum, stone aggregate(single size):63 mm nominal size, river bed material, fitter(grade1), brick aggregate (single size):50 mm nominal size, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), nylon net, paddy straw, g i wire, stone boulder ( 225mm-150mm ), stone boulder( 225 mm above ), laterite boulder, carriage of cost of neelgiri/maxican grass truf sqm, wood dust, sal silliguri, sal malaysia, neem wood, other local wood, ordinary teak wood, sisu/gamar wood, local sal wood, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), bright finished or black enamelled mild steel screws 40 mm, bright finished or black enamelled mild steel screws 20 mm, bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm, bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm, bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm, hydraulic door closer tubular type aluminium section body, brass 150 mm floor door stopper (0.357 kg), anodised aluminium hanging type door stopper, malayasia sal cleat, chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, frp composite door frame 66mm x 90mm, frp composite door frame 66mm x 70mm, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, supplying solid flush type doors of commercial quality, white cement, coal tar, carriage of steel, r.c.c ventilator of 20 mm. thick upto 0.10 sq.m. area, r.c.c ventilator of 20 mm. thick above 0.10 sq.m. area, fan hook, chlorinated polyvinyl - chloride (cpvc) pipe 15 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 20 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 32 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 40 mm outer dia, chl

State Government

CTN :45382897

08 Jun, 2026 13.48 Lacs

Faridabad - Haryana

Tender For dnit name : repairing of plaster work and providing and laying vitrified floor tiles, water proofing, floor mounted, pcc, flush door shutters, paint work, sanitary work in house no.1413, 1414, 1415 and 146 in sector-15 faridabad and all other works contingent thereto. chargeable head - annual maintenance of hsvp staff quarters in sector-15 and 15a, faridabad for the year 2026-27. - [10.1]providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling., [10.109]providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge., [10.67.1]providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 1. size of tile 500x500 mm, [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand), [11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand), [11.64.1]distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. new work (two or more coats) over and including water thinnable priming coat with cement primer, [11.96.1]finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: 1. new work (two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), [12.157.1.2]providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (glazing, panelling and dash fasteners to be paid for separately) : 1.2. for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron), [12.159.2]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 2. with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm), [13.29.1]steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 1. in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete, [13.44]providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of

Float Glass Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors