Latest floating shaft Tenders | Government floating shaft Tenders

State Government

CTN :45523590

23 Jun, 2026 10.75 Lacs

Hoshangabad - Madhya Pradesh

Tender For pre-mansoon oiling/greasing compounding work, repair of damaged floating shaft flange coupling, repair and painting of wlkway and railing and installation of barrier at parasdoh medium irrigation project under wrd division multai district betul

corporations/Associations/Others

CTN :45532881

27 Jun, 2026 NA

Kolkata - West Bengal

Tender For renovation, overhauling and replacement of nonfunctional and worn out spare parts with new ones for 4 nos. of flash mixture at wtp-iv, grww.- dismantling all the spares part by part of the gear box of flash mixture paddle and kept it at suitable place as per direction of the eic. , dismantling all the part of flash mixture paddle (excluding gear box) part by part such as sleeve coupling, driving head, base frame, bearing housing, rigid coupling, guide bush housing, guide bush, impeller shift impeller, lock bolt supporting channel etc. & as per direction of eic., , worm shaft., , wheel shaft., , coupling bush with nut and bolt., , rubber bush for pump coupling and shaft coupling., , rigid coupling, , guide bush housing., , metal deposition over damaged portion of the flash mixture paddle shaft and blade assembly by welding to its original shaft & size., , base frame, , commissioning of the complete the flash mixture paddle unit including proper alignment of the motor with gear unit and coupling of gear box and shaft. 1,7 toyhe satisfaction of the eic.

Central Government/Public Sector

CTN :45071096

06 Jun, 2026 NA

Bokaro - Jharkhand

Tender For bid to ras supply of gear box assly for hmds transfer car , coupling for hmds transfer car , floating shaft or hmds transfer car , breakdrum coupling for hmds transfer car

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

Central Government And Public Sector

CTN :45195273

04 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of a set of lt and ct floating shafts for "10t & 5t capacity eot cranes" in axle machine shop. a set consists of 1) floating shaft for lt 10 t eot crane to rwf dwg no . 705011710110, qty - 6nos. 2) floating shaft for lt of avon crane for 5t eot crane to rwf dwg no - 705013610230, qty: 6 nos 3) floating shaft for lt and ct for 5t eot crane to rwf dwg no - 705013610080, qty - 9nos 4) floating shaft for wheel set loading for 5t eot crane to rwf dwg no - 705013610250, qty : 4 nos. [ warranty period: 12 months after the date of delivery ] ]

Central Government And Public Sector

CTN :44912498

22 Apr, 2026 NA

Bangalore - Karnataka

Tender For floating shaft for cross traverse of eot crane no. 1 and 2 as per rwf drawing no. 701014411310. note: mtc issued by nabl accredited labs should accompany the supply. [ warranty period: 12 months after the date of delivery ]

CTN :43344856

11 Apr, 2026 NA

Netanar - Chhattisgarh

Tender For bid to ras supply of eot crane floating shaft d d -1600242495 lt floating shaft 765mm 90mm , 1600242494 ct floating shaft 745mm 75mm , 1600248339 lt floating shaft 593mm 120mm , 1600248338 ct floating shaf 1767mm 110 mm , 1600248337 lt floating shaft 678mm 120mm , 1600248336 ct floating shaft 1412mm 80mm , 1600248335 lt floating shaft 690mm 110mm , 1600248334 ct floating shaft 1190mm 75mm , 1600248333 ct floating shaft 1930mm 80mm , 1600248332 lt floating shaft 700mm 120mm , 1600248331 ct floating shaft 1730mm 110mm , 1600248330 ct floating shaft 1130mm 110mm , 1600248329 lt floating shaft 680mm 120mm , 1600248328 ct floating shaft 1090mm 76mm , 1600248213 lt floating shaft 600mm 95mm , 1600248327 ct floating shaft 1450mm 110mm , 1600248204 lt floating shaft 600mm 90mm , 1600248326 ct floating shaft 1640mm 70mm , 1600248325 lt floating shaft 807mm 80mm , 1600248212 ct floating shaft 572mm 70mm , 1600250716 lt floating shaft 525mm 105mm , 1600250707 ct floating shaft 1190mm 75mm , 1600250385 ct floating shaft 885mm 75mm , 1600250383 lt floating shaft 504mm 110mm , 1600250381 ct floating shaft 1740mm 110mm ) /bid number: gem/2025/b/7044067 * /dated: 26-12-2025 & & / bid document1 / 35

Floating Shaft Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

State Government

Central Government And Public Sector

Central Government And Public Sector