Latest flogger Tenders | Government flogger Tenders

corporations/Associations/Others

CTN :45300161

02 Jun, 2026 4.25 Lacs

Alwar - Rajasthan

Tender For supply and fixing of high mast light material at mia alwar - providing & fixing of ik08 ip-66 protected high power led flood light system with single piece pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on led to achieve various beam angles, of high power led of 3 to 5 watt each . integrated potted driver as a unique bis r number having efficiency more than 85 % and in compliance to bis certified and trade mark certificate. the system level luminaire efficacy >=125 lm/ wt. led driver input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety .power factor >0.95 , thd(i) 10% , driver current =750ma. driver should be phase to phase protection of 440 v for 4 hrs. electrical connector , surge protection min >=4kv internal and 10kv external but inside driver compartment, system life of 50000 burning hours with 70% of initial lumens maintained, cri>70 and cct 5700k 355k. manufactures word mark/name engraved/embossing/screen printing on die cast housing to allow traceability/authenticity. fixture shall be is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., high power led flood light minimum lumen output 14800 lm

Central Government / Public Sector

CTN :45283817

11 Jun, 2026 NA

Guntur - Andhra Pradesh

Tender For supply of 25kgs bag of earth conductivity enhancement back-filling material for treatment of earth pits. (thecompound shall contain conductive cement- 15%, graphite carbon powder - 45%, hydrous aluminum silicate- 10%,sodium montmorillonite- 30% and shall not contain bentonite)it shall be tested and confirm to the requirements of iec 62561-7.the earth enhancement material shall be supplied in sealed, moisture proof bags. these bags shall be marked with manufacturer?s name or trade name, quantity etc. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45227654

22 Jun, 2026 NA

Bangalore - Karnataka

Tender For file cover card board thick rwf-1 as per specification no.rwf/gsd/ls/02 & annexure a & b enclosed. ]consignee general stores depot/rwf, rwfkarnataka 9731.00 numbers3. t and cf.o.rdescriptiondestinationdelivery perioddescriptiondelivery /completionrate of supplyfor all items completion : within 3 months---payment termss.nodescriptionpayment terms1 100% payment against receipt, inspection and acceptance of material by the consignee atdestination.statutory variation clauses.nodescriptionpage 1 of 11run date/time: 15/05/2026 22:53:49stores/rwftender documenttender no: p1261891closing date/time: 22/06/2026 10:451 statutory variation in taxes and duties, or fresh imposition of taxes and duties by state/ centralgovernments in respect of the items stipulated in the contract (and not the raw materials thereof),within the original delivery period stipulated in the contract, or last unconditionally extended deliveryperiod shall be to railways' account. only such variation shall be admissible which takes place afterthe submission of bid. no claim on account of statutory variation in respect of existing tax/duty will beaccepted unless the tenderer has clearly indicated in his o er the rate of tax/duty considered in hisquoted rate. no claim on account of statutory variation shall be admissible on account ofmisclassification by the supplier/ contractor.railway standard fall clauses.nodescription1 not to be includedstandard governing conditionss.nodescription1 irs conditions of contract: the contract shall be governed by latest version (along with all correctionslips) of irs conditions of contract, and all other terms and conditions incorporated in the tenderdocuments.4. eligibility conditionsspecial eligibility criterias.no.descriptiontemplateconditionapplicabilityconfirmationrequiredremarksalloweddocumentsuploading1 nilnormalapplicable toall biddersyes yes allowed(optional)page 2 of 11run date/time: 15/05/2026 22:53:49stores/rwftender documenttender no: p1261891closing date/time: 22/06/2026 10:452 attention of bidders is invited to thefollowing with refere [attention ofbidders is invited to the followingwith reference to make in indiapolicy: - para 19.0 of section ii (pagesfrom 46 to 47) of attached document- lt conditions stands deleted. theprovisions for preference to make inindia policy will be applicable as perthe public procurement [preferenceto make in india] order 2017 -revision issued by ministry ofcommerce and industry, departmentfor promotion of industry andinternal trade [public procurementsection]vide their order no.p-45021/2/2017-pp[be-ii]dtd.15.06.2017, 28.05.2018,04.06.2020, 16.09.2020,04.03.2021,19-07-2024 and as applicable as onthe date of tender opening. withreference to the provisions of therevised public procurement[preference to make in india], order2017, it shall be noted that:[i]minimum 50% local content isrequired for mii compliance to qualifyas a class-i local supplier to avail thebene ts of mii policy. [ii]for class-iilocal suppliers, the minimumrequired local content is 20%. [iii]theclass-i local supplier/class-ii localsupplier shall be required to indicatepercentage of local content andprovide self-certi cation from theoem that the item o ered meets thelocal content requirement for class-ilocal supplier/class-ii local supplier ,as the case maybe. [iv]they shallalso give details of the locations atwhich the local value addition ismade. the bidder shall upload thedocument along with the bid. o ersreceived from non local-suppliers i.e.,local content forgoods/works/services tendered isless than the prescribed for class iisuppliers as above or as applicableon the date of tender opening willnot be considered for placement ofany order. [copy of railway boardsletter dated 20-08-2024 & dpiitsorder dated 19-07-2024 attached]]

Central Government / Public Sector

CTN :45240664

10 Jun, 2026 NA

Bhubaneswar - Odisha

Tender For supply of jungle boot;-1. upper shall consist of polyester viscose (pv) fabric, water-repellent as an outer layer and 100% non- woven nylon (camarilla type) lining as inner layer. the two fabrics shall be adheredtogether with flexible adhesive and polyurethane foam of 5 mm thickness. colour-olive green,colour of sole and toe cap-black (for all other boots),blend composition of polyester viscose fabric water repellent-polyester-80% viscose-remainder.binding material of polyester blended fabric, black having blend compositionof polyester-67%, cotton -33% & confirming to is:15852-2009 for colour fastness to light, washing & ph value. in socks- in sock each boot shall be provided with a detachable 4.0 mm + 1.0 mm thick full in sock of compressed molded rubber having instep arch support and adequate ribs for grip ad comfort. the outer layer of the knock hill be covered with cambrelle type material in black color. toe cap &stiffener well struck heat activated thermoplastic toe puff & stiffeners of minimum thickness 1.5 mm & 2 mm respectively shall beused.thread polyester- nil lace each pair of boots shall be provided with a pair of nylon black laces of length160 +width 6 cm. thickness of sole in the finished condition, 1 min. thickness of sole 4mm 2. cleat height 2.5 mm 3. thickness of sole when measured from outside with side wall forepart 20mm. 4.thickness of sole when measured at waist from outside with side wall(mm)16, 5. thickness of sole when measured at heel from outside with side wall(mm) (min)35. 6. mass the mass of one pair of finished boots of size 8 shall be750 to 850 gms with an increase or decrease of 50 gms for each bigger or smaller size respectively. 7-marking the outsole of the boot must be embossed /engraved with the manufacturers name or his recognized trade mark, size, month and year of manufacture.8- packing each pair of boots shall be packed in individual boxes to prevent damage. [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45241837

09 Jun, 2026 NA

Bhubaneswar - Odisha

Tender For supply of cloth angola for shirt (1.63 mtrs.)/no or similar.:-i)the yarn used to manufacture the fabric shall be made from uniform and intimate blend of 50-50 poly wool in drab shade. ii)the fabric shall be uniformly woven in plain wave and the selvedge shall be firm and straight, the fabric shall be well signed. the fabric shall be heat set and fully shrunk. iii)no major flaws (defects) in the fabric are allowed. no flag allowance will be accepted for the major flaw (defects) iv)the number of pieces to be selected at random form a lot for inspection shall be accorded and method of test as per is:8331 :2003. v)the manufacturer name of trade mark shall be woven on the both side of selvedge throughout the length using suitable yarn. the same shall be clearly visible even after processing/finishing. vi)material to be supplied in a cut length of cloth for cloth shirting angola 1.63 mtrs. each number/piece shall be packed in button down/seal tape poly bag printed with railway protection force, east coast railway, bhubaneswar. [ warranty period: 30 months after the date of delivery ] ]

CTN :45160053

18 May, 2026 1.98 Lacs

Karauli - Rajasthan

Tender For purchase material for copa trade - local area network cable , dvr cable , rj 45 connector , cmos battery , 24 port network switch , keyboard , mouse , mouse pad , smps , 9 v battery , air conditioner , cable tie/stopper/data bus bar

Central Government And Public Sector

CTN :44968153

04 May, 2026 NA

Bilaspur - Chhattisgarh

Tender For supply of set of safety protective clothing for welders as per is 6153:1971 consisting of : 1. light weight leather apron (jointed), size :1210x615x(1.5 to 2)mm ,qty :1 2. light weight leather leg guard, size : 445x310x(1.2 to 1.5)mm ,qty :2 3. light weight leather arm guard, size : 490x210/145x(1.2 to 1.5)mm ,qty :2 all leather clothing shall be stitched with 25/3 ply linen thread or cotton sewing thread conforming to variety no. 38 of is : 1720-1969.all ends of seams shall be secured by lock stitching or by riveting. the threads shall be inherently fire-resistant or be so treated that it shall not smoulder back along the seam when ignited. the protective clothing shall be marked legibly and indelibly with the following: a) manufacturer%u2019s name; b) trade-mark, if any; c) size, and d) date of manufacture. the material shall be individually wrapped in polyethylene sheets or packed in covers. specn: is: 6153:1971 [ warranty period: 30 months after the date of delivery ]

CTN :44677535

18 Apr, 2026 NA

Jammu - Jammu And Kashmir

Tender For rate contract for supply of cable of sorts along with other allied material required from time to time for day-to-day operation/ maintenance of distribution power network of this division during the financial year 2026-27. - fixing of rate contract for supply of cable of sorts along with other allied material from original equipment manufacturers/authorized dealers/local ssi units/registered firms already in the trade required from time to time for day-to-day operation/ maintenance of distribution power network of this division during the financial year 2026-27.

CTN :43202783

04 Apr, 2026 15.96 Lacs

Lucknow - Uttar Pradesh

Tender For bid to ras supply of providing, applying of wall finish, putty and pop on walls to make smooth finish for premium emulsion paint at studio corridor and technical area at akashvani lucknow , providing of wall primer for gypsum false ceiling and walls surface area of transmission studio, talk studio, vip studio, music studio, control room, playback studio, drama studio, technical area etc , applying 2 coats of wall primer on gypsum false ceiling and walls etc in studios, control room and technical area, after touching on corners, joints and screw heads etc. as required , providing of water based luxury emulsion paint for gypsum false ceiling and walls surface area of studios and technical area. the water based luxury emulsion will be of reputed make and trade mark , applying 2 to 3 coats of water based luxury emulsion on gypsum false ceiling and walls surface of above area. the area shall be kept clean from dust and all equipments shall be covered by pvc sheet , wooden surface to be cleaned and wooden putty to be applied and after rubbing with appropriate sand paper to smooth the surface two or more coat of wooden polish to be applied in wainscot and doors , providing and applying of 125mmx125mmx12mm gypsum cornice as per approved profile at all around false ceiling in studio corridor, fm studio, fm duty room, ac plant room and technical area , repair and fixing the sound proof doors and chowkhat frame including commercial ply, industrial lamination sheet and facing material with polish at akashvani lucknow ) /bid number: gem/2025/b/6966297 * /dated: 16-12-2025 & & / bid document1 / 18

CTN :44517731

30 Mar, 2026 9.00 Lacs

Jhalawar - Rajasthan

Tender For corrigendum : tools and equipment for mechanic diesel trade - bench lever shears 250mm blade x 3mm blade length 10 inch, ms sheet cutter, bench shear, manual metal cutter , discrete component trainer/basic electronics trainer is a comprehensive, educational platform designed for studying analog electronics, typically featuring built-in regulated dc power supplies, ac supplies, and a variety of soldered components , dual magnetization yoke ac/hwdc, 230 vac, 50hz , liquid penetrate inspection spray kit - 3 cans , pipe bending machine (hydraulic type) 12mm to 30 mm , pneumatic rivet gun with standard accessories aviation aluminium shell hydraulic structure portable air riveting , tin smiths bench folder a manual, hand-operated machine max bending radius 600x1.6 mm automation grade manual sheet material mild steel, stainless steel, iron finishing paint coated max thickness 4mm country of origin usage for sheet bending , electrical test bench are specialized workstations for testing components like alternators, starters, and motors. they feature sturdy, powder-coated steel frames with esd-safe tops. core specs include 3-phase ac power input, 0-600v ac/dc measurement range, digital ammeters/voltmeters, 2-5 hp motor drives, and safety features like overload protection , diesel engine six cylinder in running condition , a six-cylinder, 4-stroke, inline common rail direct injection (crdi) diesel engine in running condition typically features a 4500-6000 cc displacement, 100-150 kw output at 2000-3000 rpm, and 450-600 nm torque. these units are generally water-cooled, turbocharged, and mounted on a powder-coated iron frame for demonstration or testing purposes.

Flogger Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government / Public Sector

Central Government And Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government And Public Sector