Latest flood gate repair Tenders | Government flood gate repair Tenders

State Government

CTN :45604436

29 Jun, 2026 2.38 Lacs

Delhi - Delhi

Tender For installation 350mm sluice valve at vasant vihar bps infront of school gate under r.k puram constituency ee(c)-28.

CTN :45604303

24 Jun, 2026 42.4 Thousand

Lucknow - Uttar Pradesh

Tender For urgent maintenance of damage gate valves at cpmg office compound and sluice valve at postal colony sector k aliganj and kaiserbagh iq lucknow 2nd call

CTN :45592297

24 Jun, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan points (06) in

CTN :45585277

23 Jun, 2026 NA

Robertsganj - Uttar Pradesh

Tender For renovation of damaged left sluice valve/gate of lodhghat bundhi lot 03

CTN :45568064

30 Jun, 2026 20.00 Lacs

Burhanpur - Madhya Pradesh

Tender For tender for purchasing material in the water works department in the financial year 2026-27 - 5x5 submersible motor pump, 10x8 hp submersible motor pump, 12.5x10 hp submersible motor pump, 10 hp monoblock motor pump, 2-inch gi pipe socket (b-class), 10-foot length, 2-inch gi heavy elbow (b-class), 3-inch gi heavy elbow (b-class), 2-inch gi tee (b-class), 2-inch gi coupling (coarse and fine thread), 2-inch gi flange set (b-class), 2-inch gi blanking plate (b-class), 2-inch gi sluice valve (b-class), 3-inch gi sluice valve (b-class), 2-inch gi d-joint (b-class), 3-inch gi d-joint (b-class), 2-inch gi wheel valve (b-class, brass), 3-inch gi wheel valve (b-class, brass), 2-inch gi gate valve (b-class), 3-inch gi gate valve (b-class), 2-inch gi non-return valve (b-class), 2-inch pvc pipe (6 kg, 20 ft), 3-inch pvc pipe (6 kg, 20 ft), 6-inch pvc pipe (6 kg, 20 ft), 2-inch pvc elbow (6 kg), 3-inch pvc elbow (6 kg), 2-inch pvc coupling (6 kg), 3-inch pvc coupling (6 kg), 2-inch pvc mta (6 kg), 2-inch pvc fta (6 kg), 3-inch pvc mta (6 kg), 2-inch pvc fta (6 kg), 2-inch pvc tee (6 kg), 3-inch pvc tee (6 kg), 2-inch pvc end plug (6 kg), 3-inch pvc end plug (6 kg), 2-inch pvc valve (6 kg), 3-inch pvc valve (6 kg), 2-inch pvc repair coupler (6 kg), 3-inch pvc repair coupler (6 kg), 2x5 pvc service saddle (6 kg), 3x5 pvc service saddle (6 kg), 6x5 pvc service saddle (6 kg), 6x2 pvc service saddle (6 kg), 3x2 pvc service saddle (6 kg), 2-inch rubber gasket, 3-inch rubber gasket, 0.5-inch pvc pipe: 6 kg per 10 feet, 1-inch pvc pipe (10 ft) - 6 kg rating, 0.5-inch pvc end cap - 6 kg rating, 1-inch pvc end cap - 6 kg rating, 0.5-inch pvc elbow - 6 kg rating, 1-inch pvc elbow - 6 kg rating, 1-inch pvc coupling - 6 kg rating, 0.5-inch pvc coupling - 6 kg rating, 1-inch pvc valve - 6 kg rating, 0.5-inch pvc valve - 6 kg rating, 0.5-inch pvc brass elbow - 6 kg rating, solution (250 ml pack), 0.5x3 inch gi nipple, 0.5x6 inch gi nipple, 0.5x9 inch gi nipple, 0.5x12 inch gi nipple, 0.5x18 inch gi nipple, 0.5x24 inch gi nipple, 12 mm aluminium service wire (300 ft pack), 4 mm cable, 3-phase (for tubewell), 63a cutout, tape bundle (1/2 inch), 60 amp fuse wire, ltlk coil, ltlk claw/contact, ltlk block, ltlk kit/pocket, 9x14 relay, 20x32 relay, nut-bolt, luxury, 2.5-inch gi pipe (10 ft), 2.5-inch gi pipe (20 ft), 2.5-inch gi pipe, 6-inch pvc coupling, 6-inch pvc elbow, 6-inch p.v.c.t., 8" x 6" gi-pvc reducer, 0.5" gi tap, 0.5" upvc mta, 0.5" upvc fta, 8" tailpiece with ring, 6" tailpiece with ring, 4" tailpiece with ring, 3" tailpiece with ring, 4" gi pipe (class b, 20 ft), 4" gi elbow (class b), 4" gi coupling (class b), 4" gi tee (class b), 3" gi pipe (class b, 20 ft), 3" gi coupling (class b), 3" gi tee (class b), 3" gi bend (class b), 2.5" gi bend (class b), 2" gi elbow (class b), 2" gi tee (class b), 2" gi bend 'b' class, 0.1-inch upvc threaded nipple, 1-inch upvc threaded nipple, 1.5-inch upvc threaded nipple, 12-inch pipe wrench, 6x4 gi reducer, 8x6 gi reducer, 8-inch upvc repair coupler, 6-inch upvc repair coupler (6 kg), 6x8 pvc reducer (6 kg), 6x4 pvc reducer (6 kg), 4-inch pvc elbow, 4-inch pvc coupler, 4-inch pvc tee, 6-inch pvc elbow, 6-inch pvc coupler, 6-inch pvc tee, steel binding wire, nylon rope (per meter), 10-foot tape measure, 100-foot tape measure, 24-inch pipe wrench, 12-inch pipe wrench, ring pipe wrench, l&t starter single-phase starter (ltlk), 3-phase semi-starter, fuse wire (60 swg), bleaching powder, alum, chlorine, 1/2 hp motor, 1 hp motor, 1/2-inch hose pipe, 2-inch hose pipe, 3-inch hose pipe, 4-inch hose pipe, 2.5-inch canvas hose pipe (15 meters, for fire-fighting use), 15 hp monoblock motor pump, 20 hp monoblock motor pump, 15 hp submersible motor pump, 8-inch gi casing pipe, 2.5-inch pipe, 1-inch upvc threaded coupler, 1-inch upvc bend, oil paint (500g pack), taparia screwdriver, tester, large heavy-duty locks, 1/2-inch gi coupling, 1/2-inch hacksaw blade, hammer, pickaxe, shovel, metal pan (tagari)

State Government

CTN :45568023

22 Jun, 2026 NA

Delhi - Delhi

Tender For repairing / servicing of ivc make 1200 x 1200 mm sluice gate on set no.5 installed at inlet chamber at mansarover park sps.

State Government

CTN :45570736

01 Jul, 2026 63.72 Lacs

Kolkata - West Bengal

Tender For supplying,fitting and fixing4(four) nos. cast iron sluice gate(manually operated)and diversion of flow through gravity and pumping including de-siltation of wet well at noapara pumping station under baranagar municipality.

State Government

CTN :45581875

25 Jun, 2026 3.02 Lacs

Kolkata - West Bengal

Tender For operation maintenance of sluice gate of intake (ph-1) y-channel within wtp premisses from 01.07.2026 to 31.03.2027 (9 months) of action area-i, new town kolkata water supply project under p.h.e. dte.

Central Government/Public Sector

CTN :45574999

06 Jul, 2026 1.14 Crore

West Nimar - Madhya Pradesh

Tender For painting work of 9 nos. of radial gate, 8 nos. leaf of stoplogs, 30tgantry crane, rbc,lbc and depletion sluice gates ,hoist structure of spillway radial gates , hoist structure of rbc,lbc and depletion and replacement of rubber seal for radial gate

State Government

CTN :45131847

23 Jun, 2026 3.64 Lacs

Sarni - Madhya Pradesh

Tender For corrigendum : procurement of spares for inspection window of sluice gate enclosure and bottom ash hopper and nozzle casing with nozzle tip of ceramic lining for 8 inch jet pump assembly of ahp, unit 10 and 11 stps, sarni. - spares for inspection window for sluice gate enclosure & bottom ash hopper, pyrex glass or equivalent (size: 180 mm dia , 19 mm thick) , pyrex glass or equivalent (size: 230 mm dia, 19 mm thick) , spares for 8 jet pump assembly, nozzle casing with nozzle tip with ceramic liningnozzle tip size-35mm

Flood Gate Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

Central Government/Public Sector

State Government