Latest floor coating Tenders | Government floor coating Tenders

Central Government/Public Sector

CTN :43755622

06 Feb, 2026 NA

Mumbai - Maharashtra

Tender For supply of hex head screw, m16 x 130, as per is:1364(part-1)-2023, ce, high tensile prop. class-10.9 to is:1367(part-3)-2017, coating as per mdts-057. the item should be procured from rdso approved sources of axle end high tensile cap screws (uvam sub item id: 3100249003). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43756063

05 Feb, 2026 NA

Mumbai - Maharashtra

Tender For supply of hex. head bolt m12x55 (high tensile) for lhb/fiat bogie to is:1364(part-1)-2023, is:1367(part-3)-2017 with property class 10.9, ce and coating as per rcf spec. no. mdts-057. this item should be procured from tvs, tuff, dfl, unbrako and rdso approved vendors for axle end steel high tensile cap screws. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :42903954

13 Feb, 2026 9.10 Lacs

East Nimar - Madhya Pradesh

Tender For corrigendum : work for providing and applying dielectric floor coating paint on the floor of turbo -generator set for both the units of 2x660 mw, sstpp, mppgcl, dongalia

Central Government/Public Sector

CTN :43472167

09 Feb, 2026 NA

Angul - Odisha

Tender For corrigendum : di electric floor coating in lt and ht switchgears of ntpc kaniha

Central Government/Public Sector

CTN :43412732

06 Feb, 2026 NA

Raigarh - Chhattisgarh

Tender For corrigendum : di-electric floor coating in ht switchgears of ntpc lara

Central Government/Public Sector

CTN :43695964

06 Feb, 2026 NA

Sundergarh - Odisha

Tender For supply of corona resistant copper wire d d - item 10 , item 20 , item 30 , item 40 , item 50 electrical wire type : corona resistant material : copper dimension : 1. 25mm additional information : is:13730 triple coated corona resistant wire for vfd controlled motor base material : copper insulation coating :- base coat poly etserimide + middle coat corona resistant +top coat polyamideimide, class temp- 220 c. material: special metal oxide filled enameled copper conductor. the insulation covering thickness may be complied as per grade 2 specification of indian standard is 13730. dimension :- 1. 25mm surface :- smooth breakdown voltage :- 5 kv insulation class :- c maximum working temp :- 200 degree centigrade specification value :- is-13730, part-13, grade -2 electrical wire type : corona resistant material : copper dimension : 1. 25mm additional information : is:13730 triple coated corona resistant wire for vfd controlled motor base material : copper insulation coating :- base coat poly etserimide + middle coat corona resistant +top coat polyamideimide, class temp- 220 c. material: special metal oxide filled enameled copper conductor. the insulation covering thickness may be complied as per grade 2 specification of indian standard is 13730. dimension :- 1. 25mm surface :- smooth breakdown voltage :- 5 kv insulation class :- c maximum working temp :- 200 degree centigrade specification value :- is-13730, part-13, grade -2, electrical wire type : corona resistant material : copper dimension : 1. 0mm additional information : is:13730 triple coated corona resistant wire for ) /bid number: gem/2026/b/7140418 * /dated: 23-01-2026 & & / bid document1 / 17

Central Government/Public Sector

CTN :43721357

04 Feb, 2026 NA

Mumbai - Maharashtra

Tender For supply of hex. head bolt m12x100 (high tensile) for lhb/fiat bogie to is:1364(part-1)-2023, is:1367(part-3)-2017 with property class 10.9, ce and coating as per rcf spec. no. mdts-057.this item should be procured from tvs, tuff, dfl, unbrako and rdso approved vendors for axle end steel high tensile cap screws.

Central Government/Public Sector

CTN :43557490

31 Jan, 2026 NA

Haridwar - Uttarakhand

Tender For corrigendum : only complete machining on welded item (carriage welding/machining) and coating (as applicable) of dabg items.

State Government

CTN :43515242

16 Feb, 2026 10.00 Crore

Jaipur - Rajasthan

Tender For corrigendum : neurovascular item for neurosurgery department - super-selective high flow infusion catheters for cerebral/spinal avms (compatible with n-butyl cynoacrylates)- flow guided 150 - 180 cm long graded shaft stiffness should be compatible with 0.007, 0.008, 0.010"micro guide wire should have three segments, 1.2f, 1.5f, 1.8f, one tip marker microcatheter, 167 cmhybrid braided catheter for liquid embolic injection coil reinforced and braid reinforced0.0165/0.013-inch id, 0.014 compatible guidewire dmso compatible2.1f proximal od, 1.3f distal od, super-selective high flow infusion catheters for cerebral/spinal avms (compatible with dmso) with detachable tips 150-180 cm long graded shaft stiffness should be compatible with 0.007, 0.008, 0.009, 0.010" micro guide wire should have multi-segmented construction specify hydrophilic coating specify detachment mechanism, 1.2f, 1.5f, 1.8 f, 1.2 f with combined packing of catheter and compatible wire, 1.5 f with combined packing of catheter and compatible wire, super-selective high flow infusion catheters for cerebral/spinal avms (compatible with dmso) without detachable tips150-180 cm long graded shaft stiffnessshould be compatible with 0.007,0.008, 0.009-inch micro guide wirespecify hydrophilic coating, 1.2f, 1.3f, 1.5f, 1.8f, selective infusion micro catheters (compatible with particulate embolic agents e.g., pva particles) selective infusion micro catheters (compatible with particulate embolic agents e.g., pva particles relatively wide inner id 140-150cm long, distal tips-2f, distal tips-2.2f, distal tips-3f, distal tips-4f, delivery microcatheterproximal od 2.95 for distal od 2.6fr 0.025 id with 160cm long compatible with reperfusion catheters, two tipped micro-catheters compatible with dmso/glue, dmso compatible & 156 cmlong two tip marker coils reinforced microcatheter 0.021-inch id & steam shapeable7 segments along the shaft length 2.5f proximal od, 2.0f distal od, dmso compatible & 156 cm two tip marker coils reinforced microcatheter0.027-inch id & steam shapeable-7 segments along the shaft length- 3.1f proximal od, 2.6f distal od, dmso compatible two tip marker microcatheter 156 cm length, 0.0165-inch idhybrid braided catheter for aneurysm coiling and liquid embolic injection- coil reinforced and braid reinforced-0.014 compatible guidewire-steam shapeable- 2.1f proximal od, 1.6f distal od, two tipped microcatheter compatible with dmso/glueproximal od 2.5 for distal od 2.2fr length 160cm, dmso compatible single tip marker microcatheter, 167 cm length, 0.0165/0.013s inch id- hybrid braided catheter for liquid embolic injection- coil reinforced and braid reinforced--one tip marker microcatheter, 167 cm-, 0.014 compatible guidewire-steam shapeable-dmso compatible- 2.1f proximal od, 1.3f distal od, dmso compatible two tip marker coils reinforced microcatheter-0.017 inch id, 150 cm length-steam re-shapeable with 0.41cc dead space-7 segments along the shaft length, flow dependent micro catheter with distal tip of 1.2 f; non dmso compatiblefor access through distal, tortuous vasculature. for regional infusion of therapeutic agents or embolic materials like glue, pva etc., flow dependent micro catheter with distal tip of 1.5f non dmso compatible.for access through distal, tortuous vasculature. for regional infusion of therapeutic agents or embolic materials like glue, pva etc., atraumatic micro guide wires with torque device for use with micro catheter: sizes: 0.007 & 0.008 lengths: 150-180cms should have soft platinum floppy tip coating with hydrophilic polymer should have wires with varying degree of shaft support, sizes: 0.007 straight, sizes: 0.007 pre shaped, sizes: 0.008 straight, sizes: 0.008 pre shaped, atraumatic micro guide wires with torque device for use with micro catheter: sizes: 0.007 & 0.008 lengths: 150-180cms should have soft platinum floppy tip coating with hydrophilic polymer should have wires with varying degree of shaft suuse with mic

Central Government And Public Sector

CTN :43636754

02 Feb, 2026 NA

Sonitpur - Assam

Tender For corrigendum : supply of plain washer 36 to specification no. iso:8738-86, a2b material to st52, zinc coating as per mdts-057. item no 49 of rcf drg no lg05108.

Floor Coating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors