Latest floor screed repair Tenders | Government floor screed repair Tenders

CTN :45320325

04 Jun, 2026 NA

Doda - Jammu And Kashmir

Tender For supply of super shed structure for indoor badminton hall size 30 x 60 feet with height of 25 feet , construction of plain cement concrete flooring hard patch of whole sports complex , designing construction and installation of glass doors and windows of entire structure , construction of plain cement concrete pcc brick wall for entire sports complex , lights with electric connection exhaust fans with installation in entire sports complex , synthetic badminton mat , moveable adjustable badminton poles

CTN :45275091

28 May, 2026 5.38 Lacs

Chandigarh - Chandigarh

Tender For providing & fixing of sanitary items and allied work in model jail sector- 51, u.t. chandigarh (fansi chakki, midday meal, music room) - excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : .2.10, all kinds of soil .2.10.1, pipes, cables etc, not exceeding 80 mm dia. .2.10.1.1, pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre .2.10.1.2, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : .4.1, 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.4, 1:5:10 (1 cement : 5 coarse sand (zone-iii) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.10, brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and size in : .6.4, cement mortar 1:6 (1 cement : 6 coarse sand .6.4.2, providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (size 300mm x 600mm) .8.31, providing and fixing aluminium sliding door bolts, isi marked anodised anodic coating not less than grade ac 10 as per is : 1868), transparent. .9.96, 250x16 mm .9.96.2, as per detail attached ., providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete .9.97, 200x10 mm .9.97.2, as per detail attached ., providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : .9.1, 125 mm .9.100.1, as per detail attached ., providing and fixing pressed steel door frames conforming to is: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including m.s. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by engineer-in-charge: .10.14, profile b .10.14.1, fixing with adjustable lugs with split end tail to each jamb .10.14.1.1, providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. .11.56, polished granite stone slab of all colour and texture exceptblack,

CTN :45282015

01 Jun, 2026 1.47 Crore

Imphal - Manipur

Tender For supply of a portable shelter , arrangement for transportation , steel structur , electricla items , external elect store , furniture items - shs 100 x 100x 4.0 mm thick. make: sail /tata / apollo / equivalent isi marked, shs 50 x 50x 2.00 mm thick. make: sail /tata / apollo / equivalent isi marked, rhs 100 x 50x 4.05 mm thick. make: sail /tata / apollo / equivalent isi marked, ms plate 20 swg /1 mm thick as in wall (outer body), ms plate 18 swg /1.22 mm thick as in roof (outer body), ms plate 26 swg /0.46 mm thick as in secondary outer body., 4 mm thick acp sheet (inner) (make alstone/eurobond/ aludecor/ alstrong), hybrid (poly-isocyanate) pir panel insulation shall be provided using 45 mm thick density of 48 kg/m³ with aluminum foil one side, hdf laminated wooden flooring 8 mm thick (make - action tesla/centurry/pergo/greenpanel/micasa), 19mm thick ply make: kitply / green ply / century ply, steel doors: one number of door of size 900mm x 1800mm with inside opening shall be provided with complete accessories., steel doors: one number of door of size 900mm x 2100mm with inside opening shall be provided with complete accessories., detachable ms steps: 1x ms steps of size 600 x 300 mm 6 tier of steps made up of ms angle of size 40mm x 40mm x4mm (wt not less than 4.20 kg/m) would be provided. reference drawing as directed and approved make: sail/tata/jindal, pop rivet 3m x ½”, pop rivet 4m x ½”, welding rod n. 10, primer paint, ir absorbent paint camouflage pattern, metal putty, rubber solution, hydraulic jack with rubber hoses and fittings, electrically operated winch assy, jack side support 2 ton, map boards 6' x 6' with all accessories, vps / projector system stand, canvas cover 30'x30', 3 kg fire extinguisher & fire ball, self screw 25x1, multi spectral camoflauge net, led concealed light 9’’ x 9”x 22 watt, make- havells/ bajaj/ crompton), entrance light (bucket light), ac starter with fittings and mcb, single core wire 2.5mm, single core wire 1.5mm, single core wire 1 mm, insulation tape, modular s/w with cover on/off 5/15, socket 5 amps 3 pin, socket 15 amps 3 pin, switch boards 10 “ x 10”, switch boards 6” x 6” & 6” x 3”, exhaust fan 300mm, work station/ partition, wall mounted fan 450mm, focus / spot light for mapboards, hdmi cable for projector, led screen (sonic view / equivalent) 65'" (164 cm) with modular stand 4k ultra hd (3840 x 2160) etc. make - samsung / sony, de-humidifier 1.5 ton with stablizer and complete fittings etc. make- voltas/ daikin/lg/blue star/ panasonic., electric connections. cables to be used should isi marked of make havells/ crompton greeves/ plaza , fire retardant material. 1.5 sqmm cable to be used in all light points and 2.5 sqmm cable to be used in power points. 18 watt & 11 watt leds of make: cromptongreaves/bajaj/havells/syska . shall be provided at all light points. all switches to be used should be of 6 amp modular type of havells/anchor /crompton greeves/ general electric. the fwg electric connections shall be provided for :-, (ii) power point of 5 pin15 amp socket and 8 nos switch combination of modular type all switch point will be modular type will be provided as approved of make crompton greave/bajaj/havells ., (iii) concealed conduits will be provided for cabling in the portable shelter set of pvc insulated cable 1.5/2.5 sqmm multistanded copper conductor single core 1100v, grade conforming to is 649/1990 of make havells/finolex/plaza, (iv) mcb dp 32amps conforming to is 8828-1996 make crompton greave/ bajaj/havells, (v) miniature circuit breaker (mcb) 6 amp to 32 amps (single pole) make : crompton reave/bajaj/havells., (vi) change over over 63 amps, 3 pole of make: crompton greave/bajaj/havells., cable jointing kit for 11kv (earthed) grade cable for straight through heat shrinkage type joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminum conductor cable of size 16 sqmm to 35 sqmm, power backup (ups/ inverter system) capacity 3

CTN :45307092

15 Jun, 2026 NA

Kota - Rajasthan

Tender For supply of fd tech shelter , round tor steel tmt steel bar 8mm dia , round tor steel tmt steel bar 10mm dia , round tor steel tmt steel bar 12mm dia , ms binding wire , ppgi profiled sheet , ppgi plain sheet , 50mm long self tapping screws , powder coated aluminium door frame with toughened glass shutter , powder coated aluminium door frame with acp panel shutter , powder coated aluminum window frame with fixed toughened glass , powder coated aluminium window frame with fixed toughened glass , powder coated aluminium ventilator frame with louvered glass , pvc laminated gypsum false ceiling panel , vitrified ceramic floor tiles , 20mm thick kota stone , 20mm thick solid wood flooring laid , 50mm thick acoustic wall panels , wall putty , wall primer , oil bond distemper , weather coat exterior emulsion paint , red oxide zinc chromate primer , synthetic enamel paint , paint brush 100mm , paint brush 75mm , steel racks , computer table , 1100 v grade pvc insulated pvc sheathed copper stranded conductor , house service bracket , 1100 v grade fr pvc insulated copper conductor of size 4 sq mm , 1100 v grade fr pvc insulated copper conductor of size 2 point 5 sq mm , 1100 v grade fr pvc insulated copper conductor of size 1 point 5 sq mm , led tube light fittings 20 w , led panel ceiling light , bulk head fitting , brushless direct currect motor ceiling fan , exhaust fan with louvers shutter , switch socket combination 5 amp 5 pin , switch socket combination 15 amp 5 pin , piano type switch 5 amp , pvc ceiling rose , pvc switch board 10 x 12 inch with 3mm thick , pvc switch board 6 x 6 inch with 3mm thick , pvc conduit pipe 25 mm dia , pvc tee 25 mm dia , pvc bend 25mm dia , mcb 16 amp , mcb 10 amp , mcb 6 amp , fr electrical insulation tape , mcb db made of steel sheet , change over switch 63 amp , main switch 63 amp with spn , electrical items , lightening arrestor system , constr mtrl , river sand , aggregate 20mm graded , aggregate 40mm graded , stone boulders , cc solid bricks , machine pressed precast concrete interlocking paver block

CTN :45303387

30 May, 2026 27.97 Lacs

Delhi - Delhi

Tender For upgradation/renovation to mps flats at deen dayal upadhayay marg under sub-div.-ii of pawd-iii, new delhi, dg. 2026-27. (sh: providing and fixing wooden flooring, wpc panel, wall paper and false ceiling work in flat no. b-9, tower a-2, flat b-16 tower b-1 and others flat at ddu marg).subwork/packages:civil work

CTN :45264435

04 Jun, 2026 NA

Ujjain - Madhya Pradesh

Tender For completion of networking and electrical works in it lab, rcc flooring, electrical works, equipment foundation work in old workshop refurbishment and balance boundry wall in womens iti at ujjain

Central Government/Public Sector

CTN :45282414

27 May, 2026 NA

Chennai - Tamil Nadu

Tender For 1) supply and installation of 53 mm thick thermal cum sound insulation in roof and side wall of drivers cab area (nose cone area) only in ts/dtc coaches as per spec.icf/md/spec-413 and as per drawing train18/mc/ac(727)-9-0-005,item-4, alt-f -13 sq.mts 2)supply and installation of 28 mm thick thermal cum sound insulation in flooring of drivers cab area (nose cone area) only in ts/dtc coaches as per spec.icf/md/spec-413 and as per drawing train18/mc/ac(727)-9-0-005,item-5, alt-f -10 sq.mts 3) non-flammablesolvent based adhesive for pasting insulation material to stainless steel and spec. icf/md/spec-093,issue status-01,rev-00,dated: 27.06.1998 with amendment no.1&2 and as per drawing train18/mc/ac (727)-9-0-005,item-6,alt-f - 6 kg (approx). 4) aluminium foil pressure sensitive self adhesive tape size 0.12mm x 30mm x20 mtrs long. with spec.scotch-mount nr 0.425(zb.fa.3m) and as per pp- 57131, dt:03.06.1994 and as per drawing train18/mc ac(727)-9-0-005,item-7,alt-f - 1 no. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45252598

12 Jun, 2026 NA

Delhi - Delhi

Tender For improvement to water supply by replacement of old and badly deteriorate 2.25 lacs liters capacity rcc over head tanks (2 nos) including pump house, boundary wall, flooring of campus and other miscellaneous work at washing line hnzm in the section of sse/w/hnzm under aden/hnzm.

corporations/Associations/Others

CTN :45262303

27 May, 2026 3.10 Lacs

Port Blair - Andaman And Nicobar Islands

Tender For construction of side drain wall and flooring covering slab parking place starting from gangadeen house to unni krishnan and dr prasad house at nayagaon ward no 10