Latest floor standing lamps Tenders | Government floor standing lamps Tenders

CTN :43714353

27 Jan, 2026 NA

Vadodara - Gujarat

Tender For supply of materials for electrification work in different buildings of vadodara municipal corporation. - supplying led indoor fittings with leds of wattage 0.2 watt to 0.5 watt assembled on single mcpcb, with housing used as a heat sink shall be made of thick sheet steel conforming to is: 513/crca/ aluminium die cast powder coated and high u.v. & corrosion resistance with diffuser with company mark/name 160v to 270v, power factor more than 0.95, thd < 15%, cct 3000 k to 6500k, luminaire efficacy> 85 lumens/watt ,led led driver efficiency > 85 % ( fitting required lm-79 & lm-80 certificates)(note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacity between the ranges shown.)(a) tube light with integral driver(iii) 20 watts, surge - 2kv,ip-20, conventional 4 feet. sor no.: 2-15-1. cat iii. make : philips/ wipro/osram, providing following type of modular type accessories with necessary connection. as desired by engineer in charge. (1) 6 amp. sp one way switch. sor no.: 1-2-7. make : anchor woods/ legrand, providing following type of modular type accessories with necessary connection. as desired by engineer in charge. (2) 16 amp. sp one way switch. sor no.: 1-2-7. make : anchor woods/ legrand, providing following type of modular type accessories with necessary connection. as desired by engineer in charge. (3) 6/16amp. universal socket. sor no.: 1-2-7. make : anchor woods/ legrand, supplying upvc mini trunking (pvc casing-n-capping) having doublelocking arrangement with grooves, trunking of size not below 12.5 mm in height as per is with accessories of pvc/resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of following size . (1) 20 mm. sor no.: 1-3-5 , providing following type of modular type accessories with necessary connection. as desired by engineer in charge. (4) 6 a socket. sor no.: 1-2-7. make : anchor woods/ legrand, providing mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size.(e) in existing pipe.(a) 2 wire 1.5 sq. mm. sor no.: 1-4-1(e). make : polycab/kei/finolex, providing mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size.(e) in existing pipe.(b) 2 wire 2.5 sq. mm. sor no.: 1, supplying flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed.(e) 1.50 sq.mm 3 core round pvc sheathed. sor no.: 1-4-5. make : polycab/kei/finolex, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed.(h) 2.50 sq.mm 3 core round pvc sheathed. sor no.: 1-4-5.make : polycab/kei/finolex, providing following shockproof tissino type accessories erected on 3 mm thick pc (polycarbonate) sheet in pvc/ metal/wooden box. erected on wall/ ceiling. (1) one no single pole 6 a switch. sor no.: 1-6-1. make : anchor/straco, providing following shockproof tissino type accessories erected on 3 mm thick pc (polycarbonate) sheet in pvc/ metal/wooden box. erected on wall/ ceiling. (2) one no 3/5 pin 6 a socket. sor no.: 1-6-1.make : anchor/straco, providing following shockproof tissino type accessories erected on 3 mm thick pc (polycarbonate) sheet in pvc/ metal/wooden box. erected on wall/ ceiling. (5) one no single pole 16 a switch & one no 6/16 a universal socket combined. sor no.: 1-6- 1.make : anchor/straco, providing following shockproof tissino type accessories erected on 3 mm thick pc (polycarbonate)

corporations/Associations/Others

CTN :43777304

02 Mar, 2026 NA

Nashik - Maharashtra

Tender For supply of dcp 09 kg stored pressure type , dcp 06 kg stored pressure type , m foam 9 ltr stored pressure type , water 9 ltr squeeze grip type , co2 2 kg squeeze grip type , co2 4point5 kg squeeze grip type , co2 6point8 kg squeeze grip type , water mist backpack type fire extinguisher , trolley mounted 50 ltr foam extinguisher , floating pump , portable pump , blower cum exhauster , fire retardant dangri or suit , light weight pistol grip triple action h , aqueous film forming foam afff 3 percentage , fog nozzle with extension applicator wit , branch with revolving head , foam making branch fmb 5x , foam making branch fmb 10x , diffuser branch

CTN :42793971

31 Jan, 2026 6.66 Lacs

Delhi - Delhi

Tender For bid to ras supply of providing, fabrication and fixing of false ceiling in conference hall at dd free dish dth todapur, delhi as per respective drawing sg 10150 , providing of 600mm x 600mm hinged flap flushed doors and fixing it on the ceiling as per requirement of site at dd free dish dth todapur, delhi , providing and applying of 50mm x 50mm x 12mm wooden cornice at all around false ceiling in conference hall at dd free dish dth todapur, delhi , providing and applying of wall finish, putty and pop on walls to make smooth finish for premium emulsion paint in conference hall at dd free dish dth todapur, delhi, after touching on corners etc. , providing and applying 2 coats of wall primer and water based luxury emulsion paint on false ceiling and walls etc. in conference hall, after touching on corners, joints and screw heads etc. , fixing of 2ftx2ft recessed led light fixtures, as per respective drawing with supply of 1.5 sq.mm single core copper cable with laying and wiring of recessed mounted led light and make ready , opening space shall be provided in ceiling equal to the size of aluminium supply and return air grill, diffuser, damper of conference hall at dd free dish dth todapur, delhi ) /bid number : gem/2025/b/6892486 * /dated: 17-11-2025 & & / bid document 1 / 17

Corporations And Associations And Others

CTN :43719375

04 Feb, 2026 4.75 Lacs

Delhi - Delhi

Tender For supply of electrical materials for day to day maintenance of ei at balak ram hospital. - supply of 6- 32 amps rating, sp mcb, c curve, 10 ka breaking capacity., supply of 6- 32 amps rating, dp mcb, c curve, 10 ka breaking capacity., supply of 40 amp, 2 pole isolator ., supply of 63 amp, 2 pole isolator ., supply of 63 amp, 4 pole isolator ., supply of 100 amp, 4 pole isolator ., supply of 40 amp rating 2 pole rccb, 30 ma ., supply of 63 amp rating, 4 pole rccb, 30ma ., supply of 20 a, spn, industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure., supply of 25 mm dia isi marked, pvc conduit, supply of pvc batten / angle holder., supply of 2+6 way, spn, single door, mcb db, supply of 2+2 way, spn, single door, mcb db, supply of 4 way (4 + 12), tpn, mcb db, double door horizontal type., supply of 6 way (4 + 18), tpn, mcb db, double door horizontal type., supplying of led recessed/surface down lighter (round /square/ rectangular) smd type of following body material with pmma and prismatic diffuser and construction as per is : 10322 with driver as per the requirement with driver efficiency >85%, operating voltage ac 140-270 volt, freq 50/60 hz, operating temp range - 15 deg to 40 deg centigrade, internal surge protection of 2.5 kv with short & open circuit protection ,thd 10% , p. f. 0.95, ip20, cri >80, ugr (unified glare rating) 19, flicker free, (flicker should be below 5 %), life time (led,driver & electrical circuitary), life time of minimum 50000 burning hours with , 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000 k / 4000 k / 5700 k / 6000 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. complete in all respect i/c connections with 1.5 sq mm frls, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 105 and 120 lm/watt output . lm79 & lm80 test report from nabl lab for all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). powder coated die cast /extruded aluminium body including trim with aluminium reflector. 12 -15 watt, supplying of panel light 2x2 ft., of following body material and construction as per is : 10322 with driver as per the requirement with driver efficiency >85%, operating voltage ac 140-270 volt, freq 50/60 hz, operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 kv with short & open circuit protection,thd 10% , p. f. 0.95, ip20, cri >80, ugr (unified glare rating) 19, flicker free, (flicker should be below 5 %), life time (led,driver & electrical circuitary), of minimum 50000 burning hours with , 70% of initial lumen maintained till life ends ,cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin), sdcm(standard deviation color matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard and trade mark certificate (t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. complete in all respect i/c connections with 1.5 sq mm frls, pvc insulated copper conductor single core cable and earthing etc. as required withminimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 test report from nabl lab for all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by eng

CTN :43724642

06 Feb, 2026 NA

Sonitpur - Assam

Tender For tender for supply of conference chair as per requirement , red foot mat , formation sign insigma , oil diffuser , food thermometer , thermos steel 1 ltr , emergency light , water camper , wall mounted emergengy led light , peg table , vaccum cleaner , sofa chair , hand wash for offrs washroom , hand wash for jco/or washroom , backrest , replacement of existing sunmica of wooden table , panneling of drona hall

State Government

CTN :43514531

03 Feb, 2026 55.81 Lacs

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of electrical items for repair and maintenance of electrical installation at iiser bhopal - supply of 22 (+/-2) watt led tube light betten t-5 made of aluminium/pc body with pc diffuser with inbuilt driver for proper driving of leds. the minimum system lumen output 100lm/watt, and p.f>0.9. the cct of led used should be between 5700k to 5000k only. (make: havells/crompton/philips/wipro/orient/panasonic/ jaquar)., supply of 10 (+/-2) watt led tube light betten t-5 made of aluminium/pc body with pc diffuser with inbuilt driver for proper driving of leds. the minimum system lumen output 100lm/watt, and p.f>0.9. the cct of led used should be between 5700k to 6000k only. (make: havells/crompton/philips/wipro/orient/panasonic/jaquar)., supply of 38 (+/-2) watt recessed mounted 2x2 feet led light fitting with pc diffuser with inbuilt driver for proper driving of leds. the minimum system lumen output 100lm/watt and p.f>0.9, up to 2 kv surge protection. the cct of led used should be between 6000k to 6500k only (make-havells/crompton/philips/wipro/orient/ panasonic/jaquar), supply of 38 (+/-2) watt surface mounted 2x2 feat led light fitting with pc diffuser with inbuilt driver for proper driving of leds. the minimum system lumen output 100lm/watt and p.f.> 0.9, up to 2 kv surge protection. the cct of led used should be between 6000k to 6500k only (make-havells/crompton/philips/wipro/orient/ panasonic/jaquar)., supply of surface mounted ceiling light 18 watt led light fitting with pc diffuser with inbuilt driver for proper driving of leds. the minimum system lumen output 100lm/watt and p.f. 0.9, up to 2 kv surge protection. the cct of led used should be between 6000k to 6500k only (make:-havells/crompton/philips/ wipro/orient/ panasonic/jaquar)., supply of recessed mounted (11) ceiling light 22 (+/-2 watt led light fitting with pc diffuser with inbuilt driver for proper driving of leds. the minimum system lumen output 100lm/watt and p.f 0.9, up to 2 kv surge protection. the cct of led used should be between 6000k to 6500k only. (make-havells/crompton/philips/wipro/orient/ panasonic/jaquar), supply of surface mounted motion sensor ceiling light 10 watt led light fitting with inbuilt driver for proper driving of leds. the minimum system lumen output 100lm/watt and pf>0.9, up to 2 kv surge 6000k to protection. the cct of led used should be between (make-havells/crompton/philips/wipro/orient/ panasonic/jaquar) 6500k only, supply of 10 watt (+/-2 watt) bulkhead light fitting with inbuilt driver for proper driving of leds. the minimum system lumen output 100 im/watt and p.f>0.9, up 10 2 kv surge protection. the cct of led used should be between 6000k to 6500k only. (make:-havells/crompton/philips/ wipro/orient/ panasonic jaquar), supply of 10 watt track (study lamp) light fitting with inbuilt driver for proper driving of leds. the minimum system lumen output 100 im/watt and p.f>0.9, up to 2 kv surge protection. the cct of led used should be between 6000k to 6500k only. (make: havells/crompton/philips wipro/orient/ panasonic/jaquar), supply of 45 watt (+/-2 watt) streetlight fitting with inbuilt driver for proper driving of leds. the minimum system lumen output 100 lm/watt and p.f. 0.9, up to 2 kv surge protection. the cct of led used should be between 6000k to 6500k only. (make: havells/crompton/philips wipro/orient/ panasonic/jaquar), supply of aesthetically designed post top led luminaire smd of 40 w+ 5%, rated voltage 240v ac, 50 hz. ip 65 protection, system lumen efficacy > 90 lumens/w, voltage range 140-270 v ac, pf 20.95, cct: 5700k-6500 k, thd-10%, cri->70, operating temperature 0°c to 50°c, (make havells/crompton/philips/wipro/orient/panasonic/ jaquar)., supply of aesthetically designed tripod style inverted pyramid bollard of 0.8m to 0.9m heighted led light of 10 (+/-) 2 w at 230 v ac operation, ip 65 protection, voltage range 150-260 v ac, pf>0.9, cct: 5400k 6500k, surge protection 4.5kv made up of aluminium casti

State Government

CTN :43680382

12 Feb, 2026 4.68 Lacs

Delhi - Delhi

Tender For tender for supply of qgc special housekeeping : : -shampoo make loreal paris , tressseme or equivalent , soap dispenser , eucliptous oil (1 ltr) , aroma electrical oil diffuser which can work for up to 10 hours with a capacity of 500ml , humidify the air for a space of approx 50 sqm , automatically power off when the water in the tank is run out , operating noise level to be lower than 23 db , atleast 7 kinds of color lightsin which one you can fix 1 color or set the light gradient mode , have 3 timers setting 60min , 120min , 180min and continuous and warranty of atleast 1 year. , diffuser oil bottle , moisturiser nivea or eqivalent , weighing machine having accurate results & having atleast 1 year of warranty. , papercup holder , foot massager having atleast 3 auto programs and 3 personal preference programs , led display for easy operating , 4 customizable massage modes i.e. kneading , vibrating , rolling , heating programs 4 motors , 80w power , ac-220-240v , 15-minute auto shut-off feature & 1 year brand warranty. , hand wash 5 liter , floor disinfectant surface cleaner 5liter , ss polish 5liter

corporations/Associations/Others

CTN :43681934

03 Feb, 2026 NA

Bacheli - Chhattisgarh

Tender For supply of led luminaire : : - 1600033152,led well glass fittting 30w , 1700009199,led 90watt street light fitting , 1700004149,250 flood light fitting , 1700010044,120 w led flood light fittings , 1700010043,led based street light fitting , 1700004019,fitting led 240w , 1700004197,light fitting flood 400w , 1600041069,60w led well glass fitting with diffuser , 1700010948,150w led flood light fitting , 1700009192,led 150w high bay fitting

CTN :42916529

27 Jan, 2026 16.90 Lacs

Baran - Rajasthan

Tender For corrigendum : supply of spare/accessories items of two nos. multi-purpose fire tender(rj-28ea-0956 and rj-28-ea-0957) - 1 high pressure hose reel with 60mmlg x 19 mm (ø) with fog gun and spray type , 2 low pressure hose reel with 19 mm ø x 50 mm long hose with duel purpose shut off nozzle. 3 extension ladder 10.5 metre , 4 delivery hose 63 mm rubber lined in 30 m length (type a of is 636/79/5) complete with instantaneous coupling. , 5 long line 50 mm circumference 30 m long as per is 1084 , 6 short line 50 mm circumference 15m length as per is 1084 , 7 protective clothing for fireman complete with golves,boots,helmets with suitable face shield made out of material capable of reflecting at least 95% of radiant heat temperature around 1500 to 2000 degree celsius and also afford some protective against direct flame.the suit will be of sufficient size to accomodate a breathing apparatus to users (item should be packed in hard body box). , 8 fire hook , 9 fire man axe , 10 sledge hammer , 11 carpenter saw , 12 pick axe , 13 ceiling hook , 14 crow bar made of carbon steel , 15 self contained breathing apparatus (45 min duration compressed air type) complete with spare cylinder & tool kit) , 16 dividing breeching , 17 collecting breeching , 18 pvc suction hose heavy duty complete with copper alloy round threaded couplings to suit the pump inlet - 2.5m long. , 19 suction strainer for item 2 , 20 basket strainer suitable for item 4 , is : 3582 , 21 dividing breaching with control arrangement as per is : 5131 , 22 collecting breaching as is : 905 , 23 hose bandages rubberized is : 5612 , 24 hose clamps is : 5612 , 25 water curtain nozzle made of m .s .plate with g . m instantaneous connection , 26 branch pipe short ( chromium plated) is : 903 , 27 a set nozzle of sizes 12 mm , 16 mm , 20mm , 25 mm and 32 mm ( two each ) ( see is : 903 - 1975 * t ) , 28 adapter for 100mm suction female thread and 63mm male instantaneous 29 adaptor double female instantaneous pattern 63mm . , 30 adaptor double male instantaneous pattern 63mm , 31 hand lamp ( 4cells ) , 32 rubber gloves 33kv 1 pair , 33 fire beater , 34 foam pick up tube , 35 rubber gloves as per is 4770 - 1991 for 5000 volts , 36 leather gloves is 6994 – 1977 , 37 jack hydraulic for 20 ton capacity with handle , 38 hand controlled branch for 63 mm size hose coupling , 39 hand held fast action select flow nozzle :-the selectable flow rate multipurpose nozzle should have a multiple flow setting. this product be of light in weight and easy to handle. weight of the nozzle should not be more than 2 kg. the calibrated flow rates are easily selectable through an selection ring. the stream patterns should be changed by rotating the diffuser head ring. nozzle should be having pistol grip, shut off ball valve opening and made of aluminum alloy. , 40 bolt cutter – 600mm long , 41 shovel with handle , 42 minimum 12v halogen fog & spot lamps , 43 hose ramp

CTN :42842817

04 Feb, 2026 16.90 Lacs

Chhabra - Rajasthan

Tender For corrigendum : supply of spare/accessories items of two nos. multi-purpose fire tender(rj-28ea-0956 and rj-28- ea-0957)against tn-sc-638/2025-26(mm) - high pressure hose reel with 60mm lg x 19 mm ( ) with fog gun and spray type, low pressure hose reel with 19 mm x 50 mm long hose with duel purpose shut off nozzle., extension ladder 10.5 meter, delivery hose 63 mm rubber lined in 30 m length (type b of is 636/79/5) complete with instantaneous coupling., long line 50 mm circumference 30 m long as per is 1084., short line 50 mm circumference 15m length as per is 1084., protective clothing for fireman complete with golves, boots, helmets with suitable face shield mad out of material capable of reflecting at least 95% of radiant heat temperature around 1500 to 2000 degree celsius and also afford some protective against direct flame. the suit will be of sufficient size to accommodate a breathing apparatus to users (item should be packed in hard body box)., fire hook, fire man axe, sledge hammer, carpenter saw, pick axe, celling hook, crow bar made of carbon steel, self contained breathing apparatus (45 min duration compressed air type) complete with spare cylinder & tool kit), dividing breeching, collecting breeching, pvc suction hose heavy duty complete with copper alloy round threaded couplings to suit the pump inlet - 2.5m long., suction strainer for item 2, basket strainer suitable for item 4 , is : 3582, dividing breaching with control arrangement as per is : 5131, collecting breaching as is : 905, hose bandages rubberized is : 5612, hose clamps is : 5612, water curtain nozzle made of m .s .plate with g . m instantaneous connection, branch pipe short ( chromium plated) is : 903, a set nozzle of sizes 12 mm , 16 mm , 20mm , 25 mm and 32 mm ( two each ) ( see is : 903 - 1975 * t ), adapter for 100mm suction female thread and 63mm male instantaneous, adaptor double female instantaneous pattern 63mm ., adaptor double male instantaneous pattern 63mm, hand lamp ( 4cells ), rubber gloves 33kv 1 pair, fire beater, foam pick up tube, rubber gloves as per is 4770 - 1991 for 5000 volts, leather gloves is 6994 1977, jack hydraulic for 20 ton capacity with handle, hand controlled branch for 63 mm size hose coupling, hand held fast action select flow nozzle :-the selectable flow rate multipurpose nozzle should have a multiple flow setting. this product be of light in weight and easy to handle. weight of the nozzle should not be more than 2 kg. the calibrated flow rates are easily selectable through an selection ring. the stream patterns should be changed by rotating the diffuser head ring. nozzle should be having pistol grip, shut off ball valve opening and made of aluminum alloy., bolt cutter 600mm long, shovel with handle, minimum 12v halogen fog & spot lamps, hose ramp

Floor Standing Lamps Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Corporations And Associations And Others

State Government

State Government

corporations/Associations/Others