Tender For supply of electrical materials for the repair and maintenance of street light as per the boq - details, t-5 power/energy saver 2x24w choke, t-5 power/energy saver 24w ftl tuberod, 2x24 t5-holder, t5 power saver 2x24 fixture acrylic transparent cover, t5 power saver 4x24 fixture acrylic transparent cover, 150w hpsv choke, 150w hpsv lamp, capacitor 33mfd 250vac 50 hz, electronic ignitor suitable for 150w hpsv lamps, 150w holder (porcelain), led driver 50w bis certified, led mcpcb plate 60w, led mcpcb plate 50w, led mcpcb plate 150w, supplyingof isi marked and approved make of moulded case circuit breaker(mccb) suitable for 3phase,3pole,50hz,415 volts, ac supply with respective interrupting capacity(ka) at 415 volts cited against their range standard conforming to is - 8828: 8.1mccb with breaking capacity 25 ka at 415 v: current rating -125 amps & 70% -100% adjustable, supply of sovp device should have single high capacity varistor in the l-n plug and encapsulated spark gap for n-pe, l-n sovp should have a rated voltage of minimum 320v ac to handle indian power supply conditions. sovp should have visual indication on replaceable varistor and spark gap modules as well as a potential free contact on the socket for remote indication. sovp device should be wired up as per tt configuration of wiring in accordance with en 61643-11 standards. both the l-n and n-pe, spds should be rated for handling 30ka of nominal 8/20 s surge current.: sovp for pole light sub feeder panels - type 2 pluggable spd 3+1, rating l-n/n-pe uc 255/320 v in 30/60ka ka, lmax 30ka/60 ka, up 1.5kv, supplying of isi marked and accepted standard of miniature circuit breaker(mcb)ofcseries suitable for 240/415volts,50cycle,10ka value ac supply confirming to is:8828:1996,iec:60898 :2002 but without enclosures: single pole 63 amp., astronomical timer with dst feature, contactor 3 pole 90 amp 50hz 415volts with no-nc contacts, tpn connector 150a, supply of approved make powder coated sheet steel encloser spn mcb db inclusive of busbar,neutral bar,earth bar & two earth terminals etc. complete as per is:13032 (exclusive of mcb & isolator): 8 way double door, supply of sovp device should have single high capacity varistor in the l-n plug and encapsulated spark gap for n-pe, l-n sovp should have a rated voltage of minimum 320v ac to handle indian power supply conditions. sovp should have visual indication on replaceable varistor and spark gap modules as well as a potential free contact on the socket for remote indication. sovp device should be wired up as per tt configuration of wiring in accordance with en 61643-11 standards. both the l-n and n-pe, spds should be rated for handling 30ka of nominal 8/20 s surge current.: sovp for pole light - type 2 pluggable spd 1+1, rating l-n/n- pe uc 230/400 v in 5 ka, imax 10 ka, up 1.2kv, led batten tubelight 20w, supplying of approved make tpn mcbdb metal double door with provision for fpmcb/isolator/rccb/rcbo as incomer and sp mcbs as outgoing inclusive of busbar,neutral bar,earth bar & two earth terminals etc. complete as per is:13032 (exclusive of mcb & isolator ): 8 way (8+24), 8 sq.mm multistrand pvc insulated copper wire bundle 90mtr, 1.sq.mm aluminium single core wire bundle of 100mtr. isi marked, xlpe insulated power cable( conforming is-7098 part-1) 1100 volt grade 2-core isi marked with alu. stranded/solid conductor: 16 sq.mm unarmoured, xlpe insulated power cable( conforming is-7098 part-1) 1100 volt grade 4-core isi marked with alu. stranded/solid conductor: 16 sq.mm unarmoured, xlpe insulated power cable( conforming is-7098 part-1) 1100 volt grade 1-core isi marked with alu. stranded/solid conductor: 25sq.mm unarmoured, wooden ladder 21ft, toolkit set consisting of different sizes l-keys, screw drivers, testers and plier set., taperoll box consisting of 30pcs (conforms to is: 7809 (part 3, sec 1),self extinguishing,protects from electrolytic corrosion,excellent water resistance,suitable for primary ins
Tender For supply of different type of electrical material for maintenance purpose at various muni. building of north zone (katargam)-tube light and accessories 4 ft. (1200 mm) tube fitting including 36/40 watt electronic ballast without tube rod only fixture , 4 ft. (1200 mm) tube light rod, light output 2450 lumens. , 4 ft. 18/20 watt led complete pvc t5 tube light lumen output , 2000/2100, luminary efficiency 100lm/watt , 2 ft. 08/10 watt t5 led complete pvc tube light lumen output , 800/1000, , 4 ft. 18/20 watt led complete aluminum body t5 tube light lumen , output 2000/2100, luminary efficiency 100lm/watt , 2 ft. 08/10 watt t5 led complete aluminum body tube light lumen , output 800/1000, , 4 ft. (1200 mm) tube fitting without led tube rod only fixture with , rotating type side holder , 4 ft. led t5 tube light rod, glass type 18/20 watt lumen out 2100, 1200 , mm luminary efficiacy 100lm/watt , 36 watt electronic ballast (choke) , tube light side holder simple , led tube light side holder (rotating type ) , lamp & halogen tube , light & accessories , 2.0 x 2.0 feet square 36/40 (watt) led fixture for indoor lighting or its , equivalent , 2.0 x 2.0 feet square 36/40 (watt) led fixture driver for indoor lighting or , its equivalent , 18/20 watt, led panel light (square/round), 1700 lumens , 20/24 led panel light size 1 x 1 inch , 12/15w led panel light (square/round), 1020 lumens , 50-55 watt led flood light fitting having efficacy 100lm/watt, cct 5000 k to , 5700k , 30-35 watt led flood light fitting having efficacy 100lm/watt, cct 5000 k to , 5700k , 120 watt led flood light fitting having efficacy 100lm/watt, cct 5000 k to , 5700k , led strip light & driver , celling fan & accessories , supply of 1200 mm sweep (48''),bee 5 star rated, ceiling fan with brush less , direct current (bldc)permanent territe magnet motor, class of insulation: b, , rust free 3 nos. aluminum blades,2 nos, canopies , shackle kit with earthing , provision, 22 guage copper winding, power factor not < 0.9, service value , cmm/w) minimum 6.85, air delivery minimum 215 cmm, 305 rpm , ceiling fan,(48''),1200 mm, energy efficient ,bee 1 star rated, high speed air , delivery ,minimum 218 cmm input power maximum 53 w , pedestal fan a.c. 230 v. 50 cy/s. 400 mm sweep oscillanting ,type and , adjustable ,height complete with guard regulator, & standard lead fleixble , wires and plug top 110 watt. , supplying & erecting single phase industrial pedestal fan suitable for , medium duty ring mounted low noise operation suitable for medium duty , having 450 mm dia size and maximum speed 1440 rpm 0.80 a,80 watt. , wall fan a.c. 230 v. 50 cy/s. 400 mm sweep oscillating ,type and adjustable , height complete with guard regulator, & standard lead flexible wires and plug , top , wall fan a.c. 230 v. 50 cy/s. 450 mm sweep oscillating ,type and adjustable , height complete with guard regulator, & standard lead flexible wires and plug , top , supplying & erecting single phase approved make industrial wall fan , suitable for medium duty ring mounted low noise operation suitable for , medium duty having 600 mm dia size and maximum speed 1440 rpm 0.80 , a,180 watt. , supplying & erecting single phase approved make industrial exhaust fan , suitable for medium duty ring mounted low noise operation suitable for , medium duty having 300 mm dia size and maximum speed 1350 rpm , supplying & erecting single phase apporved make industrial exhaust fan , suitable for medium duty ring mounted low noise operation suitable for , medium duty having 225 mm dia size and maximum speed 1370 rpm , supplying & erecting approved make low noise decorative exhaust fan , having square frame abs body with inbuilt lowers & square frame, having , 150 mm with 1350 rpm , supplying & erecting approved make low noise decorative exhaust fan , having square frame abs body with inbuilt lowers & square frame, having , 200 mm with 1350 rpm , supplying & erec