Latest flow control valve Tenders | Government flow control valve Tenders

Central Government/Public Sector

CTN :45549163

24 Jun, 2026 NA

Bhusawal - Maharashtra

Tender For hyd flow control valve, for uni, mfi, duo machines. part no. hy-100-02, make- plasser/hydac/veljan-denison/stauff, note: material supplied by firm should be fitted on machine without any modifications and all ports & mounting should match as per existing part on machine and all function of item should work successfully. note: authorized dealer certificate to be submitted with supply. note: the mentioned items description as per rdso policy on procurement of spares of track machine dated 08.08.2025. [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45313584

17 Jun, 2026 NA

Sundergarh - Odisha

Tender For corrigendum : procurement of flow control valve for ash handling maintenance at ntpc darlipali

corporations/Associations/Others

CTN :45137962

22 Jun, 2026 NA

Hoshangabad - Madhya Pradesh

Tender For corrigendum : procurement of ibr valve and accessories - ibr piston valve size 25 mm , ibr piston valve 80 mm , steam supply ibr valve of prs-1 header , ibr approved main steam stop valve-125mm , ibr steam stop piston valve-150mm , ibr globe valve dn50 , ibr steam stop globe valve-150mm , fs gate valve size 15mm 0.5 , ibr steam stop gate valve-150mm , steam header prs-2 steam control valve , nrv-3 for boiler feed water line , ibr vertical nrv screwed-0.5 , c.s. reflex type guage assembly , blow down valve size-50mm , complete mobery drum for boiler ibr , spring loaded safety valve i o 50-80mm , ibr gate valve- 50 mm , ibr non return valve- 150 mm , ibr safety valve for de-areator tank , ibr steam stop valve for de-areator tank , vaccum breaker for de- areator tank , safety valve for compressed air receiver , ibr feed water control valve , ibr recirculation water control valve

CTN :45528020

03 Jul, 2026 NA

Tarapur - Maharashtra

Tender For drive shaft assembly 6q class 1 , kit nbm inserts 6q class 1 (1 set= 8 nos. ) , set of two pinion shaft bearing , flow control valve assembly

CTN :45506365

01 Jul, 2026 NA

Mumbai - Maharashtra

Tender For tender for supply of spares of helo traversing system afas ibs and machinary control and monitoring system 25blec001 c - grease nipple , hooter , mechanical lock pin limit switch , lubrication unit , pump element lub unit , spring feed lubricator , ram cylinder seal kit , o ring for straight male stud coupling 1 14 bspx30 mm od , return line case drain filter element , pressure reducing valve 1 14 nb 7 bar to 1.5 bar , replenishing low pressure inline filter element , power fuse sf94939ooo rating 160a , sea water pressure switch , aux contactor 240v 2no 2nc , bush for turret hinge , hose 07 id 12 7 x 1 5 mts lg , suction hose id- 38 1x 1 10 mts , ls hose id-7 9x 0 7 mts lg , delivery hose id 31 8 0 5 mts , return line filter , qdc p line female , qdc p line and tank line male , qdc ls and drain female , qdc ls and drain male , indication lamp green 110v ac , ss hexagon head nut grade ss316 nut size m12 , ss spring washer diameter 12 mm , mcb 2p 32a , 63a mccb 3p , mccb 160a , mccb 25a , mo0 4no contactor , mo 0 2no 2nc contactor , aux cont bl mnx 95 550 contr 2nd right , vme 10 channel serial isolator card aitech c106 , hydraulic hose pipe , pressure gague sta , 1 change over 24v dc slim relay make- finder , exhaust fan , cat 6 cable patch chord , smps for mfc processor 110 220v ac to 5vdc 4a 12v dc 1a , exhaust fan size 80x80x25 mm , pressure transmitter 0 10 bar mbs33m , pressure transmitter 0 10 bar emp 2 , dc power supply , push button , lamp , lamp , lamp , lamp , lamp , lamp , dl 100 mccb 25a , mcb hager 3p 2a c curve type ncn 302n , selector switch22.5mm type no m22 wrk4 , pressure sensor level transmitter hyd , mini terminal block 29 x 27mm ref cat no cmt4 , cont trafo 380 240v 1 5 kva bur 1500va bur ins class f frq 50hz , overload relay l t backup fuse up to 25a contactor mountin , gland packing 1 set 1x10 m , shock mounts y 450 , high tensile hex boltm20x80l , m20 spring washer , pressure gauge 100 mm dial 0 250 bar , distance tube , spacer , m20 hex nut 2 , grease nipple g1 4 , deliver hose with dko fitt both side bsp 2 id 50x5000l , lubrication unit , shock mount x 70 , male stud coupling 1 4 bsp x 10mm od , straight coupling 10 mm odx 10mm od , equal union 1 4 bsp x 1 4 bsp 60 degree cone angle , straight bulkhead coupling 10 mm odx10mm od , 1 4 bore 1 4 bsp both ends str female swivel nut len 500 mm , clamp for 10 mm od tube , bonded seal 3 8 bsp , bonded seal 3 4 bsp , bonded seal 1 1 4 bsp , bonded seal 1 1 2 bsp , bonded seal 2 bsp , 14 tp 20 atc x fe insulated cores lfh outer layer 250v , 3 core x 2 5 mm2 abc hf xlpe insulated shf2 , 24vdc omron relay socket pyf08a , plc relay 24v single contact 2 pdt 6a , 2tp x 0 5 mm2 atc hf xlpe insulated shf2 , 100a terminal block , qdc suction female , qdc suction male , axial piston pump , axial piston pump , panel pc

CTN :45512407

02 Jul, 2026 NA

Ernakulam - Kerala

Tender For tender for supply of pressure transmitter , o ring , locking screw , loctite 601 , conditional actuator safeties card , overspeed detection card , bearing for timing gear , bevel pinion , o ring , gasket joint , v belt a49 , valve guide , expansion bellow , o ring - exh valve guide 60 c7 id18x2.5 , press switch set at 1.5bar mode pe2.5 , pressure transmitter , set bolt m27 item no 203 , gfl nut , washer , valve relief assy , set bolt m24x3x140 8.8 , screw set , nut , allen screw , circlip external 19mm , banjo boltm12x1.5 , washer plain , washer copper , copper washer 18x24 , washer copper , washer copper , worm drive hose clip 30mm , conical spring washer , disc spring , spherical brg assembly , main bolt , links , spacer , cap screw position 40 , spring washer position 41 , overload roller , cap screw position 80 , main bearing assly , eccentric shaft , pinion , punched gasket , flexmast coupl pipe 88.9mm o.d 096500v3.650 , circlip internal , flexmast conn gm10006 038 38 od pipe , joint , key for damper , damping bush , fuel feed pump del suction conn , sleeve dn32 pn16 , sleeve dn200 pn16 , rubber compensative sleeve dn150 pn16 , element for lo thermostat 63 71 deg c , o ring an28 , oil level contact type 20007 , speed sensor 19050 , rubles compens sleeves dn50 pn16 lf130 , injection pump assly dia23 grad , 2 way pneumatic valve , o ring 05x260 , main bolts , temp sensor rtd pt100 mbt 2 s 80 1/2 fie dgf , overspeed air intlet connection , governor control air inlet connection , fuel rack position limiter air inlet connection , flow switch , pressure switch xml bso4b2s11 , sleeve nt1 cc pn16 dn40 av cb , spacer , gasket , addesive super cyano 495 , metallic gasket , corrugated metallic joint , expansion bellow , pressure reducer 30 7 bar , filter pad set fx4000 , lid seal for fx4000 , tie rod , bush , bush , lgc pin lgc g5 8x30 , group small end bearing , o ring , bush , roller valve gear bar , valve guide , snap ring , sealing ring an 13 60c7 , stud , spring collar , spring , o ring ms29-513/126 21a7 nse 6.531 , nozzle injector , injector nozzle , needle , safty valve on cyl. head , pin for rack bar , link for rack , valve feed , spring , coupling holder , top spring collar , scale shim bar , serrated pin , positioning pin , filter oil fuel pump 1set 16nos , adjusting screw bar , o ring , metafram bush bp25 16/20x20 , ball bearing skf 6307 , shim for gov control , spacer bar , o-ring an 49 nse6.5 60c7 , o ring anno 53 nse 6.5 60 , bearing roller , water pipe gasket , retaining valve rk44dn65 , seal housing flange , o ring , o ring , spring collar bar , gasket , o ring no18 nse6.5 60c7 , loctite 573 , gasket , particle detection filter , b.s.ring type c30 nse6.51 20a8 , thermocouple for turbocharger , fuel filter element , o ring 162x8 , nut for shaft , limit switch for gachot valve , protect cyl head tie rod , guide piece f valve gear , lock washer pair , dome nut m30x2 , piston ring p3712 , pneumatic distributor pneu/pneu , inlet valve seat , solenoid valve safety stop , hexagon bolt , ht water pump assly cw , o ring ms 295 13/245 60c7 viton , ring spanner for nuts 17 19 22 24 46 50 mm , solenoid over speed air , pressure regulator , pressure transmitter 10 bar 24vdc o/p-4-20 ma , gasket , exhaust valve seat , bush , displaying and protection module , illuminated blue push button 2no , hexagon bolt , o ring an53 60c7 , o ring kalrez , set bolt m30 x 3.5 , joint 65x65x2mm , ball bearing skf 6212 , o ring-exh valve guide-60 c7 id 18x2.5 , actuator safeties card , gasket , starting air hose assly , pressure switch 2.5-28 bar , regr safeties temp card rsp card , pressure transmitter 6 bar 24vdc o/p-4-20 ma , oil seal for fuel booster pump 16x40x10 , bs ring-bsb d12 nse6.51 20a8 , piston , nut , roller bearing 110 60 22 , bush , socket for pressure sensor or switch , air filter , power switch , field communication module 170fnt11001 , illuminated green push button 2no , gasket , sensor for exh temp tc , filter for pressure redu

Central Government/Public Sector

CTN :45473359

03 Jul, 2026 NA

Erode - Tamil Nadu

Tender For supply of set of lrus and spares for m/s kbil make computer control brake system of three phase electric - filter - mr, filter - bp, filter - 20, filter - ac, display assly for controller, control portion - bc, control portion - er, control portion - bp, distributor valve, isolating valve (fp), 3/2 way cock (sifa), valve assy. 821 vent, feed valve, pressure reducing valve, isolating cock, stop cock, magnet valve, overflow valve, 3/2 way cock (kaba key), check valve (cv), flow meter valve, valve assemby drivers back-up, cab1 (ptdc), control node assembly ebv-1, control node assembly ebv-2

Central Government/Public Sector

CTN :45520947

22 Jun, 2026 NA

Bokaro - Jharkhand

Tender For supply of dc sol valve pn vp78s3 for cvt strap m c , dc sol valve pn vp78d3 for cvt strap m c , dc sol valve pn sy9140 for cvt strap m c , air filter pn 610f for strap cvt m410-an , flow control valve pn as5000- 02 cvt m410 , flow control valve pn as5000-04 cvt m410 , cylinder head cap screw m10x30 cvt m410 , cylinder heat protection guard cvt m410 , head tilting cylinder pn c0514 15-16 cvt , head forward reverse cyl -q15h 1107 cvt , cylinder b50-1800 sig516-v-01-58 cvtm410 , pneumatic accessories pn q15h 1099 cvt , pneumatic fittings strapng head side cvt , pneumatic fittings head forward cvt m410 , pneumatic fittings head reverse cvt m410 , pneumatic fittings panel side cvt-m410 , heat proof pn pipe strapng head side cvt , heat proof pn pipes head forward cvt-410 , heat proof pn pipes head reverse cvtm410 * /bid number : gem/2026/b/7649333 + /dated: 11-06-2026 ' ' / bid document 1 / 24

Central Government/Public Sector

CTN :45347724

20 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For corrigendum : supply of poppet valve assembly part no. n12078 pv ibr , carriage assembly part no. 398067 r60abf1 , feed tube part no. ff2ja0 242 , lance joint and packing assembly part no. 398071 ax00 , guide roller part no. 316944 1122 , roller bracket assembly front support part no. n1207812 c013 , upper twin element assembly part no. n1207814 c040 , limit switch trip assembly part no. 398694 000b , pressure switch part no. 8473568924 , expand cable control assembly part no. 398349000a

CTN :45384476

17 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For corrigendum : purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

Flow Control Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector