Latest flower cutter scrap Tenders | Government flower cutter scrap Tenders

Central Government / Public Sector

CTN :40004695

22 Apr, 2025 80.37 Lacs

Kandla - Gujarat

Tender For custom bid for services - supply of spares for railway track maintenance contract at kandla foreshore terminal-schedule - a (supply of railway track material): 1, fish plate 60kg 1meter long, with bolt 12.00 pair, 2, fish plate 52kg 1meter long, with bolt 25.00 pair, 3, fish bolt 25x140 100.00 nos, 4, curved switch 52kg, 1:8.5 with fitting 1.00 set, 5, supply of 50mm ballast 900.00 mt, 6, supply of rail 60kg 3.922 mt, 7, supply of rail 52kg 13.491 mt, 8, check rail distance block 200.00 nos, 9, check rail bolt 25x190 full thred 225.00 nos, 10, single coil spring washar 500.00 nos, 11, j clip 750.00 nos, 12, grsp 5000.00 nos, 13, sleeper 60kg 40.00 nos, 14 juction fix plate 52 & 62 kg combination, 1meter long , (4plate called 1 set) 2.00 set, 9, 15 supply of cms x-ing 52 kg with checkrail &, fitting 1.00 set, 16, erc m-3 5000.00 nos, 17, gfn liner t-3702 (52kg rail & sleeper) 2500.00 nos, 18, ms liner t-3738 (52kg rail & sleeper) 5000.00 nos, 19 gfn liner t-3707 & 3708 (52kg rail & 60kg, sleeper) 2500.00 set, 4 sub-total for schedule - a, schedule - b (railway track work), 1 renewal of tongue rails & stock rails (straight or, curved) complete with fittings & fastenings,, ensuring proper housing & changing of stretcher, bars, if required; but excluding sleepers. work, also includes drilling of hole, if any required and, fixing of fish plates. released rails shall be, stacked at indicated place. {note : 1).one set, means two tongue rails and two stock rails (2), in case when only one tongue & stock rail are, replaced, only 50% of the quantity shall be, payable. (3) if only one tongue rail is replaced,, only 25% of the quantity of switch assembly shall, be payable} for respective item., 2.00 set, 2 deep screening of track in terms of para-238 of, indian railways permanent way manual in other, than psc sleepers of any density and screening, of complete ballast section. it includes opening of, ballast, digging down to specified depth below, bottom of sleeper to provide formation slope of, 1:40 towards drain or any prescribed direction,, taking out caked ballast, muck etc. from entire, ballast section, putting back clean ballast as per, required ballast profile, throwing away screened, muck arising out of screening on toe of bank or, on cess, if low or on spoil banks above top of, cutting (including throwing and leveling, if, required beyond minimum 5m from the edge of, cutting which are upto 3m deep or alternatively, carting it upto 50m for disposing it off beyond, cutting or platforms) as per direction of engineer, in-charge, including cutting cess, if required for, effective drainage upto a distance of 3.5m from, centre line of track on both sides and including, one round of kutcha packing with screened, ballast including attending to track parameter to make track fit for 20 kmph speed. necessary, wooden blocks shall be brought by the, contractor. 450.00 trm, 3 through packing of track, as described in para-, 224 of indian railways permanent way manual - 1350.00 trm, 4 fabrication (including cutting & bending) and, fixing of check rails of all sections as per, railway s approved drawings & specifications for, level crossings / trolley paths, duly cutting rail, flanges, wherever required to correct alignment, and level with railway s rail, fittings & fastenings,, drilling of holes in heck rails with all fittings, e.g., rail screws / grip expansion bolts, brackets,, packing pieces, bolts, washers etc. and as, directed by the engineer in-charge, 192.00 rm, 5 providing and injecting approved grout in, proportion recommended by the manufacturer, into cracks/honey-comb area of concrete/, masonry by suitable gun/pump at required, pressure including cutting of nipples after curing, etc. complete as per directions of engineer-incharge. (the payment shall be made on the, basis of actual weight of approved grout, injected.) epoxy injection grout in concrete/rcc, work of approved, make, 50.0

State Government

CTN :40011979

28 Apr, 2025 1.18 Crore

Bathinda - Punjab

Tender For laying of under ground pipe line, lowering and jointing of different dia rcc pipes, cutting of different dia rcc pipes for different dia aav and cutting of 150mm rcc pipes for avp, fixing of avp, fixing of different dia aav at various sites

CTN :40004740

03 May, 2025 1.31 Crore

Baramulla - Jammu And Kashmir

Tender For supply of steel loop hole of size 610 mm x 330 mm fabricated with u channel , pre prefabricated steel door confirming to is 1038 1938 of size 900mm x1800mm , door window loop hole lintel made out of isa 50 x 50 x 6mm 910mm length will be provided over door and loop holes , prefab steel jali made up of isa 30x30x3mm frame and 25x25x3mm , mild steel angle double shelf corner made out all parts of ms angle 35x35x5mm with hold fast 130mm , pre cast rcc beams 110x110x1420mm minimum m 25 grade , steel beam ismb 125mm rsj 125 x 70mm , bitumen 80 20 vg 10 grade , quick setting compound , water proofing compound confirming , load bearing concrete pcc soild blocks of size 400mm x 200 mm x 200 mm , app membrane for water proofing conforming to is 1322 198 of size 20m x 0 90m , hdpe sand bag laminated , oil bound distemper 1st quality of ivory shade , paint synthetic enamel 1st quality og , 110mm dia upvc swr pipe single socketed pipe type a , hdpe sheet for pcc , interlocking tiles , aggregate 20mm , aggregate 40mm , manufactured sand , thinner , cement base paint , cable pvc insulated and un sheathed single core size 2.5 sqmm , cable pvc insulated and pvc sheathed 1100v grade twin core size 10sq mm , flexible wire pvc insulated twin core twisted size 22 0.0076 , pvc casing caping pipe 25mmx16mm , pvc casing caping l bend 25mm , pvc casing caping t 25 x 16mm , pvc casing caping elbow 25 x 16mm , pvc casing caping square box 4 x 4 , cp screw 20 mm , ms screw 35 mm , mcb single pole 230v ac 50 hz 6 amps , modular switch one way 6 amps , modular socket 6a 2 3 pin , white cover plate , metal flush box , led tube light fitting 1 x 18w and 4 feet long , pvc ceiling rose 2 3 terminal , insulation tape 2 cm , main switch 16 amps , mcb distribution board in sheet metal , modular socket 16a 2 3 , mcb single pole 230v ac 50 hz 16 amps , pvc rawal plug , pvc body exhaust fan 250mm , two tier sleeping bunks two tier sleeping bunks as per drawing attached as appx j , waste bin 60 ltr dia 240 x 275 top , looking mirror 1200x750x3.5mm thick , hanger stand 450mm , brick trowel steel 305 mm , brick hammer , aluminium straight edge 50mm , plaster trowel with hard , galvanised iron pan mortar tasla , fish line , plumb bob iron , rammer earth with 6 long , picks axes with chiesel and point ends , showel square nose 14 gauge tata , phowrah with hard wooden , painting brush 100 mm , multipurpose no slip rubber reusable gloves , aluminium spirit level 12 inch , water leveling pipe pvc 50 mtr , cutting plier insulates 6 inch , measuring tape 15 mtr , heating device kerosene based , fire extinguisher 2 kgs capacity ab map 90 , earthing electrode prefabricated gel earthing electrode of pipe in pipe technology. , gi pipe 100 mm dia , back filled compound , ms earth pit cover of , aluminium strip of , iron spikes 16 inch long complete , gi strip of size 32 x 6mm 3.00m long , gi nipple 20mm dia , gi reducer socket 40x20mm , lightning air terminal a copper tube 150 cm long x 25 mm dia with five copper prongs of length 15cm each fixed to copper ball of dia 50mm and 4mm thick , ms clamp 40x2mm , gi wire 12 gauge , earth augur , pvc pipe 3m , user manual , tester set meger , gi pipe medium grade of 40mm dia 6 mtr long and one equal socket of 40mm dia , natural sand conforming to is 383 1970 specifications for coarse and fine aggregates , gi pipe 40 mm bore , 50 mm bore gi pipes sleeve , crystaline condcutive mixture ccm bid details/ 2 / 63

State Government

CTN :39983586

24 Apr, 2025 48.54 Lacs

Malerkotla - Punjab

Tender For construction of rcc ohsr 50000 ltr capacity prov and installing solar panel prov and fixing delivery main repair of pump chamber development of water works prov and stringing of pipe lines jointing cutting and testing of pvc pipes and rising main etc

State Government

CTN :39938679

21 Apr, 2025 58.46 Lacs

Malerkotla - Punjab

Tender For construction of rcc ohsr prov and installing solar panel repair of pump chamber prov and stringing rising main ci fitting development of water works prov and stringing of pipe lines jointing cutting and testing of pvc pipes etc

CTN :39971258

30 Apr, 2025 44.54 Lacs

Baramulla - Jammu And Kashmir

Tender For supply of arty amn bunker - natural sand. natural sand confirming to is 3831970 , manufactured sand m sand confirming to is 383 2016 , aggregate 20mm. stone aggregate to be crushed rock or gravel 20mm , aggregate 40mm. stone aggregate to be crushed rock or gravel 40mm graded , reinforcement. tmt steel bars 12 mm dia bar for rcc roof band , reinforcement.tmt steel bars 10 mm dia bar for rcc roof band , reinforcement.tmt steel bars 8 mm dia bar for rcc roof band , ms binding wire annealed not less than 0.9 dia confirming to relevant is. , ply wood 1.50m x 0.20 m and 12mm thick for shuttering of rcc roof band. , ply wood 10 mm thick as per requirement for flat surface , load bearing concrete pcc soild blocks of size 400mm x 200 mm x 200 mm using plain cement concrete , ismb 150 rsj 150 x 75mm 5.70m long conforming to is 808 1973. , ismc 75 x 40 mm 3.10m long conforming to is 808 1973 , 5mm thick ms plate of size 250 x 75 to be welded with ismb on both ends , 5mm thick ms plate of size 175 x 50 to be welded with ismb on both ends , 20 nos x 12mm dia 150mm long foundation bolt to welded with 150mm long , 4 nos x 12mm dia 100mm long foundation bolt with nut and 2 nos x 3mm thick steel washer , 4 nos x 16mm dia 100mm long foundation bolt with nut and 2 nos x 3mm thick steel washer , steel roofing trough srt of size 1530 x 613 x 180mm made out of 2mm thick hot rolled carbon steel , hdpe laminated sand bags of size 75 x 40cm sand colour and each bag having weight not less than 75 gms , pbs roll self finished tarfelt hessian base for water proofing , 0.60mm thick ppgi sheet of size 3.00mx1.00m for roof at entrance , 3.1m long rectangular hollow section rhs of size 66 x 33 x 2.90mm at rafter of roof at entrance16.02 kg m. , 3.1m long rectangular hollow sectionrhs of size 66 x 33 x 2.90mm at purlin of roof , 150mm long ms angle of size 50x50x6mm for the use of holdfast to fix rafter with baffle wall at roof and at rear to fix ppgi sheets , self taping screw 80mm , water proofing compound confirming to is 4645- 1975 make-pidilite dr fixit acclerex cico fosroc. , rapidite quick setting liquid. , silicone gel sealant of 01 pack of 400 gms including applicator gun , bitumen for filling of expansion joint of pcc , hdpe sheet having weight 100 gm sqm black of width 5.50mm confirming to is 2508 1984 , pre-fabricated steel window of size 600mm x450mm shall be provided with arty amn bunker. , ms rack of size 1.22m x 0.61m x 1.65m will be supplied alongwith each arty amn bunker. , steel door confirming to is 10381938 of size 900mm x1800mm. , synthetic enamel paint colour og chocolate 1st quality , oil bound distemper of approved brand. , thinner make asian berge shalimar. , chalk white , cement base paint. make duracem snowcem and british xtracem , brick trowel steel 305 mm with handle. , brick hammer with handle weight 1.2 kg. , aluminimum straight edge 50mm squre 2mm thick 1800mm long , plaster trowel with hard wooden handle isi marked. , galvanised iron pan mortar tasla 16 gauge16 inch dia minimum weight of 1.5 kg , fish line best quality. brick line , plumb bob iron best quality with all accessories. , rammer earth with 6 feet long hard wooden handle minimum weight 5 kg without handle , picks axes with chiesel and point ends kudali 14 cp nominal weight 3.0 kg , showel square nose 14 gauge tata high carbon steel product code svl 022 blade , phowrah with hard wooden handles with min weight 2.00 kgs , painting brush 100 mm best quality. , multipurpose non-slip rubber reusable gloves for scrubbing , aluminium spirit level 12 inch , water leveling pipe pvc 50 mtr , cutting plier insulates 6 inch , measuring tape 15 mtr , fire extinguisher 6 kg abc map 90 along with its accessories confirming to is 13849 2 nos for one amn pd shall be provided , store list for jelly filled lc as per appx c

State Government

CTN :39938757

21 Apr, 2025 1.19 Crore

Guruharsahai - Punjab

Tender For : dnit for internal improvement works of cluster section no. s-362 (a) (package-2) for water supply schemes 1. basti maghar singh, 2. basti saroop singh wali, block guruharsahai & distt. ferozepur (under state share/jjm) name of work :- "construction of rcc ohsr 50000 ltrs capacity with sill level not less than 17.00 mtr. and height upto fsl 20.00 mtr from formation level, disinfection unit electrically based and construction of pump chamber 3.05 x 3.70m including gravil pit and construction of ihhl complete in all respects, providing, laying, cutting, jointing & testing of pvc pipe 6kg/cm2 for distribution. including cost of excavation, dismantling & relaying of dry brick on edge paving and dismantling of metalled road, cc flooring, house hold water connection with water meter & development of water works site etc. complete in all respect and all other works contgent there to". (completion period 10 month)

CTN :39967222

22 Apr, 2025 14.85 Lacs

Multi City - Karnataka

Tender For supply of materials for the construction of nrlm building under mgnregs scheme" - ppura mason class 1, eletrification, gst, ppura cp brass waste 32 mm of standard pattern, ppura brass stop cock, ppura lead or pvc connection pipe 32mm dia (for wash basin), ppura licenced plumber with tools, ppura pvc pipe of 4kg cum,63 mm, ppura pvc pipe of 4kg cum,110 mm, ppura polyenthylene water storage tank of specified capacity l, ppura labour charges for lifting and placing in position and making connection at 7%, ppura handling loading and unloading 3% on material, ppura water proofing cement paint, ppura add brush, putty, sand paper at 2% on cost of paint, ppura plastic emulsion paint, ppura add brush, putty, sand paper, roller at 5% on cost of paint, ppura enamel paint, ppura transportation charges of materials beyond 5 km10%, ppura cost of 6.5mm m.s. coil, ppura fabrication charges., ppura mason class 2, ppura rcc cap 1000 mm dia, 100 mm thick, ppura corpenter, ppura corpenter avrage, ppura chrominum plated screws, ppura 5.50 mm thick plain glass, ppura fabricator, ppura add hom of welding and grinding machine 2% on material, ppura formwork, centering & scaffolding for plastering & painting of ceiling - 25%, ppura vitrified tiles 600x600 mm, ppura high bond tile adhesive for vitrified tiles, ppura adhesive for joints, ppura machine polished granite stone slabs 20 mm, ppura stone dresser (with tools), ppura ceramic tiles of size 30 x 30 cms, ppura white cement, ppura orissa pattern of size 580x440mm with integral type foot rests, ppura 100mm s or p trap, ppura p.v.c. flushing cistern 10 lts low level with fitting, ppura c.i. / m.s. brackets for flushing cistern, ppura g.i. 32mm dia telescopic flush pipes with fittings specials, ppura m.s. holder bat clamp 32mm, ppura g.i. overflow pipe 20mm dia, ppura special for overflow pipe, ppura mosquito proof coupling 25mm, ppura add white lead paint, gasket, cement, sand for making good the wall and floor, ppura white vitreous china clay flat back wash basin size 630x450mm, ppura copper plated brass piller tap 15mm, ppura cp brass chain with plug, ppura binding wire, ppura m.s rods, ppura ms flat, ppura fitter class i, ppura welder grade i, ppura add hom of welding and grinding machine 4% on material, ppura ready mix primer paint (ready mix red lead paint), ppura add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint, ppura painter class i, ppura add providing and removing scaffolding at 3% on labour, ppura add handling , loading and unloading at 2% on material, ppura enamel metal paint, ppura add brush at 1% on cost of paint, ppura mathi/nandi wood planks for panels 25 mm thick, ppura add cutting and other wastage 5%, ppura hom of machinaries for planing, ppura mathi/nandi wood scantling, ppura unit cost as per the specification, ppura powder coated 60-70 micron, ppura nylon rollers, ppura rubber beading for shutters beading, ppura pvc beading, ppura alluminium tower bolt - 20 cm, ppura alluminium handles - 15 mm, ppura cleat angles, ppura coarse sand (zone iii), ppura portland cement, ppura mixer (concrete) - 1 cum capacity, ppura add watering charges at 1 % on material, ppura add sundries charges at 1 % on material, ppura over head & other miscellaneous charges, ppura size stone 20 x 20 x 25 cms, ppura bond stone 20 x 20 x 45 cm, ppura boulders, ppura mixer (concrete small used in culvert), ppura mason class i (with tools), ppura mason class ii (with tools), ppura stone chistler class ii, ppura plasticizer / super plasticizer, ppura hom of vibrator 0.71 days, ppura add sundries charges at 1 % on labour, ppura add watering charges at 1 % on labour, ppura formwork, centering & scaffolding for beams & lintels of building - 60%, ppura formwork, centering & scaffolding for roof (straight & arched) - 50%, ppura burnt bricks of class designation 35 modular, ppura casurina poles 100 - 150 mm, ppura add handling , loading and unloading at 1% on material,

CTN :39967258

17 Apr, 2025 11.82 Lacs

Multi City - Karnataka

Tender For supply of matrials to constraction katageri nrlm shed - broken stone aggregate 40 mm size (kat01), broken stone aggregate 20 mm size (kat01), broken stone aggregate 12 mm to 10 mm size(kat01), coarse sand (zone iii) (kat01), portland cement (kat01), mixer (concrete) - 1 cum capacity (kat01), add watering charges at 1 percentage on material (kat01), add sundries charges at 1 percentage on material (kat01), transportation/loading and unloading of material/lifting of material /wastage/unforeseen charges/miscellaneous which are necessary during execution. (kat01), granite/trap broken metal 100 mm and down size (kat01), plasticizer / super plasticizer (kat01), hom of vibrator 0.71 days (kat01), tmt bars fe 500 (kat01), binding wire (kat01), size stone 20 x 20 x 25 cms (kat01), bond stone 20 x 20 x 45 cm (kat01), boulders (kat01), mixer (concrete small used in culvert) (kat01), mason class i (with tools) (kat01), mason class ii (with tools) (kat01), stone chistler class ii (kat01), add sundries charges at 1 percentage on labour (kat01), add watering charges at 1 percentage on labour (kat01), silver oak or equivalent planks 38 mm thick (kat01), casurina poles 100 - 150 mm (kat01), add handling , loading and unloading at 2 percentage on material (kat01), add sundries charges at 2 percentage on material (kat01), casurina poles 75 - 100 mm dia (kat01), jungle wood runners and planks (kat01), solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm (kat01), add handling , loading and unloading at 1 percentage on material (kat01), solid concrete blocks (40x10x20 cms)-4.00 n/sqmm (kat01), add providing and removing scaffolding at 3 percentage on labour (kat01), vitrified tiles 600x600 mm (kat01), mathi/nandi wood planks for panels 25 mm thick (kat01), add cutting and other wastage 5 percentage (kat01), hom of machinaries for planing (kat01), mathi/nandi wood scantling (kat01), unit cost as per the specification (kat01), m.s rods (kat01), ms flat (kat01), fitter class i (kat01), welder grade i (kat01), add hom of welding and grinding machine at 4 percentage on material (kat01), ready mix primer paint (ready mix red lead paint) (kat01), add wire brush, fine steel wool, putty, sand paper, at 3 percentage on cost of paint (kat01), painter class i (kat01), enamel metal paint (kat01), add brush at 1 percentage on cost of paint (kat01), ceramic tiles 30 x 30 cms (kat01), white cement (kat01), plastic emulsion paint (kat01), add brush, putty, sand paper, roller at 5 percentage on cost of paint (kat01), water proofing cement paint (kat01), add brush, putty, sand paper at 2percentage on cost of paint (kat01), liquid wood filler (kat01), add brush, putty, sand paper at 5 percentage on cost of paint (kat01), enamel paint (kat01), polyenthylene water storage tank of specified capacity l (kat01), labour charges for lifting and placing in position and making connection at 7 percentage on material (kat01), handling loading and unloading 3 percentage on material (kat01), indian type water closet of size 580 mm of specified make with footrests (kat01), a 100mm s or p trap (kat01), add white lead paint, gasket, cement, sand for making good the wall and floor at 2 percentage on material (kat01), add cement sand and grit 1 percentage on material (kat01), licenced plumber with tools (kat01), add 5 percentage for fittings and wastage charges (kat01), polythylene pipes high density 25mm external dia (kat01), cost of 6.5mm m.s. coil (kat01), fabrication charges. (kat01), labour charges for handing errection of rcc rings etc. at 5 percentage (kat01), transportation charges of materials beyond 5 km at 10 percentage (kat01), rcc cap 1000 mm dia, 100 mm thick (kat01), pvc pipe of 10kg/cum,90 mm (kat01)

CTN :39931462

16 Apr, 2025 4.93 Lacs

Ramgarh - Jharkhand

Tender For providing and fixing 15 nos. rcc hume pipe and cutting garland drain of length 700.00 mt at different locations in mines for monsoon preparation work under sarubera project of kuju area.

Flower Cutter Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

State Government

State Government

State Government