Latest flush door shutters Tenders | Government flush door shutters Tenders

Central Government/Public Sector

CTN :45561183

25 Aug, 2026 NA

Delhi - Delhi

Tender For supply of single piece frp louvre shutter for 2'-0"wide window, colour- satin blue color in inner side (sliding bolt/ latch side) and apricot yellow on outer surface only drawing no.:- rdso / sk-97020 , alt. ( 8 ) specification: - i-rdso/2007/cg-02 (rev.-1) with 3 amendments ii-rdso/2007/cg-01 with 3 amendments (for smc) [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45556529

30 Jun, 2026 NA

Vadodara - Gujarat

Tender For supply of sliding glass shutter for bus type windows (for lhb coaches) to drg. no. c&w.lgd.sk no.1070 col- 1 (lh) in assembled condition. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45536170

01 Jul, 2026 20.00 Lacs

Jodhpur - Rajasthan

Tender For repair to flooring plastering store house flooring rolling shutter sliding door and msic works inside depot area at a a banar under ge banar

Central Government/Public Sector

CTN :45515811

17 Jun, 2026 NA

Nagpur - Maharashtra

Tender For renovation of entrance door with 12 mm thick toughened glass sliding shutter at akashvani, civil lines, nagpur

State Government

CTN :45511074

17 Jun, 2026 32.32 Lacs

Faridabad - Haryana

Tender For hew 121 repairing of plaster work and providing and laying vitrified floor tiles, water proofing, floor mounted, pcc, flush door shutters, paint work, sanitary work in house no.1413, 1414, 1415 and 146 in sector-15 faridabad and all other

CTN :45457878

17 Jun, 2026 3.36 Lacs

Subarnapur - Odisha

Tender For new ib building at sonepur_building - finishing wall with weather coat of approved quality two coats to give an even shade with brush to outside wall surface after cleaning surface including cost of paint watering and curing cost conveyance and taxes of all materials and labour,cess with t&p required for the work etc. complete in all floors., providing and fixing chequred tiles in floors, treads of steps and landing on 25mm thick bed of cement mortar (1:1) (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, t&p and cess etc. complete in all respect as per specification and direction of the engineer-in-charge., 32mm piasal wood or local teak wood panelled shutters moulded panels with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect. but excluding the cost of iron fittings., providing, fitting & fixing up partition walling oel aluminium anodised section no. 9210 and 9207 as single groove and double groove respectively as horizantal and vertical member and oel section 4660 as tapered clip for fixing up 12mm thick prelaminated board (nova pan make) and jointing angle no.1855 etc.(12mm thick novapan prelaminated bead), fly ash brick masonry in c.m (1:6) including cost conveyance royalty of all materials., providing 12mm thick cement plaster (1:6) over the brick masonry walls including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of engineer-in-charge., providing c.c. (1:2:4) using 12mm size hard granite crusher broken chips including all cost carriage royality taxes and all labour involved for the completion of item of work as per direction of engineer- in - charge., dismantling and removing doors, windows and ventilatoras including removal of frame,hinges and stacking the same for re-use and removing the debris within 50mtr lead etc complete., supplying, fitting & fixing of window (sliding type made up alminum section) 151-154,151-155, as windows frame section no.151-155, 151-153 nad 151-167 as shutter framw with 5mm thcik black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour t & p etc complete as per direction of enginner -in charge., providing , fitting & fixing of al. door with oel anodized al. door section of 9202 aas vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick prelaminated board in botttom portion fixed on door frame by means of tapered clip no.4660 and frame to be completed bt means of jointing angle no.1855 including all cost of labour t & p hire charges of drilling machine labour charges etc complete.

CTN :45451264

19 Jun, 2026 NA

Budgam - Jammu And Kashmir

Tender For tender for supply of main column of rhs 122x61x3.6 mm (9.67 kgsperrm) , 3.0m length each conforming to is 4923.2017 , truss the principle rafter and the bottom chord shall be fabricated out of rectangular steel hollow sections of size 96mm x 48 mmx 3.6 mm (8.00 kg per rm) with 1 by 2 slopes. all other strut members will be fabricated out of rectangular steel hollow sections of size 66mm x 33 mm x 3.2 mm (4.07 kg per rm). conforming to is 4923.2017 , side runner made of shs 45x45x2.6mm thick having two pales at both ends 45x90x6mm with two holes of dia 12mm welded on either ends between column to column for fixing u chanel for pir panels , purlin will be fabricated out of rectangular steel hollow sections of size 80mm x 40 mm x 3.6 mm (6.40 kgperrm) with cleats welded at both the ends conforming to is 4923.2017 , extention purlin shall be of 450mm long fabricated out of rectangular steel hollow sections of size 80mm x 40 mm x 3.6 mm (6.40 kgperrm) with cleats welded at both the ends conforming to is 4923.2017 , sun shade frame with sheet- sunshades shall be made out of 0.50 mm thick camouflage pattern colour coated steel sheet conforming to is 14246-2024 (or is 277-2018 reaffirmed 2022 for base galvanized sheet) fixed with angle iron frame of isa 40 x 40 x 5 mm (3.0 kgperrm) conforming to is 808-2021. , roofing sheets - 0.50 mm thick ppgi camouflage pattern (is 14246-2013) of size 3000x1060mmx0.50mm zinc coating 120 gsm (is 277-2018). self-drilling hex washer head fasteners (hot-dip zinc). , false ceiling supporting angle - ms 65x65x5 mm for placing of puf 40mm thick length - 4180mm , false ceiling supporting l-section of 50 x 50 x 5mm thick (3.80 kgperrm) fixed appropriately to the truss for placing of puf 40mm thick length - 3000mm , wall puff panel of size (1000 (w) x 3000 (ht) , 40 mm 0.50 mm colour-coated gi both sides , camouflage ext per off white , tongue & groove interlocking , conforming to is 16203- 2016 , partition wall puff panel of size (1000 (w) x 3000 (ht) , 40 mm 0.50 mm colour-coated gi both sides , bothside off white colour (intperext) , tongue & groove interlocking , conforming to is 16203- 2016 , puff panel for ceiling portion of size (1000 (w) x 3000 (ht) , 40 mm 0.50 mm colour-coated gi both sides , bothside off white colour (intperext) , tongue & groove interlocking , conforming to is 16203- 2016 , main external door - size 1000x2100 mm (01 no) 2 mm thick aluminium frame (is 1948-2024). shutter- 40 mm puf (0.50 mm ppgi both sides , . fittings- 4 nos magnetic hinges (100 mm hd) , 2 al sliding bolts (300 mm) , al tower bolt (200 mm) , 2 d-handles , 1 helical door spring , door closer (is 208-1996) , padlock + 2 spare keys. canopy 1300x450 mm with isa 35x35x3 mm frame. , internal doors - size 750x2100 mm (06 nos) 2 mm thick aluminium frame (is 1948-2024). shutter- 40 mm puf (0.50 mm ppgi both sides. fittings per door- 4 magnetic hinges (100 mm hd) , 1 al sliding bolt (300 mm) , al tower bolt (200 mm) , 2 d-type handles (150 mm). , fixed upvc window - 1000x450 mm (01 no) installed at ht 2.1 m from ffl. upvc frame & shutter thick (is 17953-2023). double glazed- 5 mm + 10 mm air + 5 mm toughened safety glass (is 2553 pt 1-2018). fixed gi wire mesh 18-20 g , (is 4948-2002). anodised aluminium grill on outer side (is 733-1983). rubberperneoprene packing for weather tightness. , ventilators with exhaust fan - 250 mm sweep (06 nos) 4 nos in toilet cubicles + 2 nos in bathroom cubicles. upvc frame 2 mm thick (is 17953-2023). shutter- 4 mm frostedperpinhead dg upvc fibre glass , drop-flap type , opens internally. fittings- hinges , eye hooks , tower bolt 100 mm (is 15833-2009). fly-proofing- ss wire mesh aperture on upvc outer frame. exhaust fan 200 mm with louver pre-cut at factory. , inner corner flashing 50x50x3000mm , 0.5mm thick , bird cover flashing 50x250x3000mm , 0.5mm thick , outer corner 3100mm x 200mm x 200mm , ridge cover 2400mm x 300x300mm , top & bottom u flashing 40x40x65x1.5mm thi

State Government

CTN :45446877

11 Jun, 2026 NA

Khaperkheda - Maharashtra

Tender For material supply for all types of material for gp hinganabara in year 2026 - 27 - sand (kanhan), soft murun, metal 80 mm, metal 40 mm, metal 20 mm, metal 10 mm, rcc pipe 800 mm with colar (acc), rcc pipe 600 mm with colar (acc), rcc pipe 450 mm with colar (acc), rcc pipe 400 mm with colar (acc), rcc pipe 300 mm with colar (acc), rcc pipe 200 mm with colar (acc), cement 53 grade isi mark (acc), cement 53 grade isi mark (ambuja), cement 53 grade isi mark ( ultra tech ), still 6 mm, still 8 mm, still 10 mm, still 12 mm, vibretar, centring tar, water trankar tractor troali, jcb, mixchar machine, centring plate, damp proof paint, information board still with painting, oil bound distemper, plastic emulsion paint, water proof cement paint, lead / zink base oil paint, single lef door 16 mm thik, door kittas, door fremas, primer, washabe oil bound distemper, chequered tiles, solid panel pvc internal door shutter, bricks, aluminium fixed windows (two track sliding ), putty, pvc nahani, gally trap 15*10 mm, swr pipe 110 mm, steel window, screw down bib 15mm, bricks, peving block 60 mm, cota stone, urinal 10 ltr, water close pan complit, air valve 25 mm, butter fly valve 65 mm, sluice valve 65 mm, strainless steel sluice valve 65 mm, pvc pipe 90 mm with bends/clams, pvc pile 65 mm with bend/clams, pvc pipe 110 mm with bends/clams, solution, caramic tiles, vetrifide tiles, water storage tank, iron pipe 15 mm, iron pipe 25 mm, wire 1.5 mm, wire 2 mm, wire 4 mm, service wire 4 mm, switch bord (moduler plate) 6*8 inch, switch bord (moduler plate) 3*6 inch, fan box, metal box 6*8 inch, metal box 3*6 inch, pvc pipe 1 inch, bends 1 inch, jangshan box, mcb switch 32 amp, led lamp 18 w, siling fan

CTN :45409767

17 Jun, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of bus type window assembly with sliding shutter as per drg.no.ls/ay/bw5-4-003, alt-nil. [ warranty period: 30 months after the date of delivery ] ]