Latest flush door Tenders | Government flush door Tenders

State Government

CTN :44454770

28 Mar, 2026 NA

Amravati - Maharashtra

Tender For supply of laying rough shahabad stone flooring 25mm to 30mm thick , providingthe old plastered internal surface with sand paper , providing and applying two coats of wall care putty on plastered surface , providing and applying washable oil bound distemper of approved colour and shade to old , providing and applying two coat of polymer based external paint of standard manufacture , first floor , providing and fixing m40 grade thick vibrated pull cast or similar type concrete , providing and constructing granite kitchen platform , providing and fixing 75 mm dia stabiliser pipe p.v.c. soil ventwaste , providing and fixing 100 mm dia stabiliser pipe p.v.c. soil ventwaste pipe , providing and fixing p.v.c. rain water pipes of 160mm outer diameter , providing , laying and fixing ,jointing eco drain 160 mm sn 4 nu drain upvc pipes or of equivalent make , providing and laying in trenches 25 mm dai. cpvc pipe including necessary providing, fittings. reproviding filling trenches , providing and fixing on wallsceilingfloor 20 mm dia. cpvc pipe with necessary fittings , providing and fixing on walls ceiling floor 25 mm dia. cpvc pipe with necessary fittings , providing and fixing 15 mm diameter pvc aqua kraft type of approved make super bib tap with flange including all accessories etc complete , providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary socketsunion nut complete. , providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary socketsunion nut complete. , providing and laying concrete pipes of i.s.np. class of 300mm diameter in proper line, level and slope including necessary collars, providing , providing and laying in trenches 40mm dai. cpvc pipe including necessary providing, fittings. reproviding filling trenches etc. complete , providing and constructing brick masonry inspection chamber 90cm x 45cm x 90cm including 148 cement concrete , providing dehadi rate , providing and constructing brick masonry inspection chamber 60cm x 45cm x 90cm including 148 cement concrete , providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 148 outside the building including , providing and fixing h.d.p container syntex or alike one piece moulded water tank made out of low density , providing and fixing heavy duty inter locking concrete rubber mould glossy paving blocks , providing and fixing frp fiber reinforced plastic door with shutter 25 to 30mm , providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black amba white , providing and fixing in position. as per i.s.1868 1982 aluminium sliding window of two tracks , providing and fixing solid core flush door shutter in double leaf 32 mm thick decorative type of exterior grade , providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete.medium duty 100 kilogram , providing and fixing 100 mm dia. chromium plated brass showers rose to 15mm dia. supply pipe including necessary bend and socket complete. , providing and erecting chain link fencing 1.6 m. height with g.i. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm , providing and fixing white glazed earthenware wash hand basin of 55cm. x 40 cm. size

CTN :44314078

16 Mar, 2026 NA

East Sikkim - Sikkim

Tender For bid to ras supply of ceramic ( vitreous china ) flushing cisterns for water closets and urinals conforming to is 774 (q3) , wooden bits , aluminium mortice door lock 4 levers 100mm vertical type , aluminium mortice night latch 4 levers 100mm , aluminium door handle 75mm , aluminium door handle 100mm , aluminium door hinge , rubber gasket , joint sealent , exterior emulsion paint white , distemper 1st quality , paint remover , eboard 4mm thick 595 by 595mm , hard wood 2nd class clean sawn planks width , factory made single wpc solid plain flush door shutter of 30mm , cubboard knobs brass 40mm , chequered tiles 25cm by 25cm by 22mm , machine pressed precase concreate interlocking paver lock 60mm thick , glazed ceremic tiles 350 by 450 by 7mm , tar felt 1m by 10 mtr , shalipatch , cp extension nipple 1 inch , cp extension nipple 1 point 5 inch , cp extension nipple 2 inch , cp elbow 1 inch , door handle , cpvc ball cock , cpvc ft , cpvc mt , cpvc pipe kalemp 20mm , gi wire ) /bid number: gem/2026/b/7298501 * /dated: 03-03-2026 & & / bid document1 / 28

CTN :44249026

14 Mar, 2026 NA

Bathinda - Punjab

Tender For bid to ras tender for supply of lv7/stln(vf) p-2409239 tie rod end assy , lv7/stln(vf) x-1831042 shift cylinder body , lv7/stln 2520-72-0486000 u j kit , lv7/stln f-9e03900 inspection lamp 12v , lv7/tata 2618-4010-6701 hub bolt front (m 20) , lv7/tata 2641-7250-2302 door glass rh , lv7/tata 274772502301 regulating glass lh , lv7/tata 2530-017635 brake shoe externally actuated

CTN :44024234

14 Mar, 2026 22.38 Lacs

Kamrup - Assam

Tender For bid to ras supply of gyser 15 ltr storage capacity , cp bib cock long body 15 mm , connection pipe 15 mm cp , wooden beading size , tubler type hydraulically regulated door closer , wooden scantling , providing and fixing of high performance transparent glass , wpc solid decorative type flush door shutter , providing and fixing of upvc off white colour fixed glazed windows , providing and fixing of upvc off white colour fixed glazed ventilators , pvc flush door width 800 mm x height 2005 mm and 20 mm thick , painting brush 4 inches , painting roller 9 inches ) /bid number : gem/2026/b/7198123 * /dated: 14-02-2026 & & / bid document 1 / 19

Central Government/Public Sector

CTN :44432771

18 Mar, 2026 NA

Kota - Rajasthan

Tender For auction sale of others - 98050035 u/s ms sheet consisting of cut pieces of side and end panel with lirries, flat, angle, channel, angle frame, door stiffener with attachment if any etc.(stack 01). qty. 60mt. for stock holder sse/c&w/g/kota. ss-11 no.- sse/c&w/g/ktt/2025-26/c/13 date 12.01.2026. ds-8 no. 043386 date 12.01.2026 lot should be sold on as is where is basis. purchasers are requested to see the lot/site and approchable road before bidding. no claim will be entertained after sale of lot.the stock holder is responsible for any alteration, deletion & variation in the lot or in weighment or tempering with the lot will be solely responsibility of stock holder after joint inspection, if any found subsequently.bidder must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. delivery will be given by actual weight from govt. approved dharam kanta.material are lying in rajasthan state

Central Government/Public Sector

CTN :44432772

18 Mar, 2026 NA

Kota - Rajasthan

Tender For auction sale of others - 98050126 u/s ms scrap consisting of cut pieces of angle iron, channel, side bearer housing, nut, bolt, pins, door rester, lock assembly, cr, friction liner plats, stricker wear plates etc. .(stack 01). qty. 80mt for stock holder sse/c&w/g/kota. ss-11 no.- sse/c&w/g/ktt/2025-26/c/14 date 12.01.2026. ds-8 no. 043387 date 12.01.2026 lot should be sold on as is where is basis. purchasers are requested to see the lot/site and approchable road before bidding. no claim will be entertained after sale of lot.the stock holder is responsible for any alteration, deletion & variation in the lot or in weighment or tempering with the lot will be solely responsibility of stock holder after joint inspection, if any found subsequently. bidder must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date.delivery will be given by actual weight from govt. approved dharam kanta.material are lying in rajasthan state.

Central Government/Public Sector

CTN :44432713

19 Mar, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components, end shield, air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs, cowl, rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly, coupler front plate, coupler rear plate, break liver, bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover, axle guide and racer, traction link, the bar, traction housing, spheriblock, brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, pantograph, deflector for hitachi traction motor, protective tube collars, alternator cowl of various sorts, anchor link, flushing valve, hydraulic nut,emu scrap including fan body, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , semi permanent coupler, bogie mounted brake cylinder of ac loco,traction link with bush, emu after cooler, cr tank,cbc restrictor,centre pivot block assembly with rubber bush, draw and buff gear, side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 980

Central Government/Public Sector

CTN :44440433

17 Mar, 2026 NA

Chennai - Tamil Nadu

Tender For supply of inspection door

State Government

CTN :44311050

16 Mar, 2026 3.11 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : replacement of existing damaged/deteriorated doors with wood polymer composite (wpc) flush doors in anamudi a block at iiser tvm campus, vithura

Central Government/Public Sector

CTN :44414085

14 Mar, 2026 NA

Jaipur - Rajasthan

Tender For supply of carpentry materials (stock purpose) . aagle kunda 12" , allen key set , aluminium bidding brown , aluminium gate lock godrej , anchor fastner 10mm , anchor fastner 8mm , flush door beading 5mm , black star screw 1" , black star screw 1.25" , black star screw 1.5" , bolt & debri chokhat , bolt & debri gate , chorsi 1" , chorsi 1/2" , cloth hanger 4 way , curtain rod , curtain bracket packet , door closer godrej , door handle 4" ss , door stopper front , door stopper plastic , drawer channel 14" , drawer handle 4" , drawer handle 6" , hammer drill bit 6mm , hammer drill bit 12mm , fevicol marine , fix pana 10x11 , fix pana 12x13 , floor machine aluminium gate , glass rubber , goti bit 8 no , gunia 6 inch , hammer 200 gram , hanging fastner 8mm , hexa blade double fanar , sliding aluminum window hook lock

Flush Door Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector