Web Analytics Made Easy - StatCounter

Flushing Machine Tenders

Get complete information related to latest Flushing Machine Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Flushing Machine Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Flushing Machine Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :45302387 Due date: 28 May, 202628 May, 2026 NA
Tender For auction sale of others - abandoned old buildings/sheds/structures of mg workshop- 04 units, unit no. 19 - small shed near dome, unit no. 22 - record room, unit no. 23 - dwm office, unit no. 24 - machine and generator room location - mg workshop bvp. this lot of abandoned condemned buildings consisting of released door with chokhat wooden u/s - 3 nos, released window with chokhat wooden u/s - 41 nos, released wood - 1.296 cum, released ac sheet approx. - 433 sqm, released steel door u/s - 60 kg, released manglore tiles approx. - 620 sqm, released rails from structures u/s [41.25.50r & other miscellaneous type of rail off sizes] - 896 kg, ms scrap. i.e tie bar, flat, angle, fish plate, nut, bolt, ms sheet door, steel bar, gi sheet, xpm jalli etc. off size approx - 6726.7 kg, released masonary /rubble approx - 290.9 cum. custodian - sse (w) bvp, mode of delivery by lot, loading by purchaser. note: 1. dismantling is permitted up to ground level only. digging below ground level is not permitted. due care is to be taken by the bidder/purchaser to avoid unwanted mishapes at work spots. they should ensure to keep a safety banner around the work spot till it is completed since the locations are surrounded with working offices. 2. after removing/ clearing the rcc/ brick machonary rubbish from the spot only, the delivery of wood/ iron material will be affected. 3. contractor should take care of any cable while dismantling and digging. damage to railways shall be recovered as per extent rules. 4. part delivery/ part handing over is not allowed. 5. any ng/mg/bg pway rail lines or pway scrap with or without attachments lying under or beneath the building/sheds/structures or surrounding area are not deliverable. 6. any non-ferrous material of high value if found from the lot, it needs to be submitted by the purchaser to the custodian. 7. power of attorney along with aadhar card/identity proof/address proof must be submitted to this office for verification of authorised person by bidder before handing over (if any.) fdp 50 days.

State Government

CTN :45304035 Due date: 01 Jun, 202601 Jun, 2026 8.10 Lacs
Tender For overhauling/major repair of trash rack clearing machine(trcm) installed at new silt ejector, at wyc he project, bhudkalan

CTN :45096060 Due date: 29 May, 202629 May, 2026 NA
Tender For supply of general items - neumatic piston pump for, emptying oil from l.o drum, (manually operated barrel, pump), mcb-3 pole 10 a, mcb-2 pole 10 a, mcb 2pole 20 amps, mcb 3 pole c 32 amps, fuse mro - 2a, fuse mro - 4a, fuse mro - 6a, fuse mro - 16a, a10 s solo detector tester, (hfc/free smoke), hot water boiler 20 ltr, denki engineering co, 220v/3kw, tester 230v / 2w, bearing puller 3-leg 10 inch, bearing puller 2-leg 10 inch, m-10 bolt and nut with, washer- 17mm, m-12 bolt and nut with, washer- 19mm, m-16 bolt and nut with, washer- 24mm, bench wise 5", taparia punching tools set, 16 pieces, feeler guage metric 0.05to, 2mm, high pressure washer bosch, aqua tech 125, spectra park 309 cooling, water test kit part no. 739466, racor nb liquid part no., 571356, neumatic needle gun with, spare needles, felt filter (10mm thick x 30, mtr length, descaling liquid part no., 571653, sea clean plus part no., 654715, enviro clean part no. 765018, electrsolve e part no. 604389, submersible pump vertical, 1hp, 230v crompton brand, rain coat long single pice, size - m-l-xl-xxl water proof,, any reputed brand for, marine use, lemon grass oil highly, concentrated in one ltr, sealed bottle, pillow microfiber standard, size 51 x 66 cm, any reputed, brand (recron, kurlon,, sleepwell, wakfit), hand pump for clearing, basin blocks (make mr, plussection), tiffin carrier, (milton/nolta) with 3 layer, gmdss battery for walky, takie make-icom bp-234,, lithium, battery pack 9.0 v,, 3300mah, 30wh, gmdss battery for walky, takie make-ental, lithium,, battery pack 9.0 v, 3300mah,, 30wh, gmdss battery for walky, takie make- sailor, lithium,, battery pack 9.0 v, 3300mah,, 30wh, gmdss battery for walky, takie make- mucmurdo,, lithium, battery pack 9.0 v,, 3300mah, 30wh, embarcation ladder, without spreader length, beween 4 to 9 mtr as per mmd, standard with approval, certificate ( quote on per, mtr basis), pilot ladder with spreader, length beween 4 to 9 mtr as, per mmd standard with, approval certificate ( quote, on per mtr basis), safety helmet good quality, ( white/yellow/orange), colurs, flux coated soldering wire, (gram), glass tube fuse - 793650, glass tube fuse - 793651, glass tube fuse - 793652, glass tube fuse - 793653, glass tube fuse - 793655, glass tube fuse - 793656, glass tube fuse - 793657, glass tube fuse - 793658, electrical working gloves, (pair), electrical line tester, (medium), stud extractor (set), wilden pump 1 inch, (pneumatic pump, butterfly valve - dn - 50 mm, butterfly valve - dn - 75 mm, butterfly valve - dn - 100 mm, butterfly valve - dn - 125 mm, butterfly valve - dn - 150 mm, multiangle anvil cutter, external circlip remover, (large, medium & small), internal circlip remover, (large, medium & small), portable hand drill bosch, (220v - 50hz), cutting wheel 4 inch size, hand grinder machine bosch, (220v - 50hz), glass wool type - 4 inch x 10, mtr roll, engine cooling water, testing kit(drew/equalent), bamboo plywood 6x4 feet,, thickness 10 mm, used bycycle tube, double door deep freezer, hard top chest freezer,, make blue/volras/hair,310, ltr or neares, single door deep freezer,, hard top chest freezer,, make blue/volras/hair,130, ltr or neares, microwave oven, make, bajaj/wirlpool/lg - 2310 etc,, capacity 23l, rating - 230v,, power input - 1300 w,, (microwave), 1200w (grill),, 1200w (convention), power, out put 800w, frequency -, 2450 mhz, temprid sc insecticide for, bed bugs and cocroches, control - 500 ml, semi automatic washing, machine 7 kg any reputed, brand ( worlpool/lg/hair), fully automatic washing, machine 7 kg any reputed, brand ( worlpool/lg/hair), vaccum cleaner portable, (bosch, black and decker), mixer grinder, 4 jar, 750 watts, (lakshmi, butterfly preethi), television android 32 inch, led (sumsung/lg), television android 42 inch, led (sumsung/lg), wet grinder heavy duty, boiler suit orange colur sizes-m-l-xl- xxl, safety shoe with steel toe, size-6-7-8-9-10-11 any reputed, brand, rate trap, metal rate trap

State Government

CTN :45075057 Due date: 11 May, 202611 May, 2026 20.83 Lacs
Tender For hiring of super sucker and jetting machine for clearing of rcc pipe culvert over nahari major distributary and other culverts on bakner link drain for the flood season 2026.

corporations/Associations/Others

CTN :45033657 Due date: 20 May, 202620 May, 2026 35.17 Lacs
Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

Central Government/Public Sector

CTN :44977685 Due date: 29 Apr, 202629 Apr, 2026 NA
Tender For auction sale of others - abandoned old buildings/sheds/structures of mg workshop- 04 units ,unit no. 19 - small shed near dome , unit no. 22 - record room, unit no. 23 - dwm office, unit no. 24 - machine and generator room location - mg workshop bvp. in lot abandoned condemned buildings consisting of released ac sheet approx. - 433 sqm, released steel door u/s - 60 kg, released manglore tiles approx. - 620 sqm, released rails from structures u/s [41.25.50r & other miscellaneous type of rail off sizes] - 896 kg, ms scrap. i.e tie bar, flat, angle, fish plate, nut, bolt, ms sheet door, steel bar , gi sheet, xpm jalli etc. off size approx - 6726.7 kg, released masonary /rubble approx - 290.9 cum. custodian is sse (w) bvp, mode of delivery by weight, deliverable lot qty - 7.683 mt, loading by purchaser. note: 1. delivery of only ferrous material as mentioned qty. in lot will be given. purchaser is not allowed to take leftover ferrous material. 2. all wooden material including released door with chowkhat, released window with chowkhat, zaffry or any other wooden items are reclaimable and needed to submit to the custodian at reclaim area marked in mg workshop. 3. delivery of the material will be given only after submission of reclaimable material 4. purchaser needs to remove debris, bricks, masonary, rubble, ac sheets, manglore tiles from the dismantling sites untill ground is fully clear before taking the delivery. 5. dismantling is permitted up to ground level only. below ground level does not be permitted. cutting is permitted. due care is to be taken by the bidder/purchaser to avoid unwanted mishapes at work spots. they should ensure to keep a safety banner around the work spot till it is completed since the locations are surrounded with working offices. 6. after removing/ clearing the rcc/ brick masonary rubbish from the spot only, the delivery of iron material will be affected. 7. contractor should take care of any cable while dismantling and digging. damage to railways shall be recovered as per extent rules. 8. part delivery is not allowed. 9. any mg/bg rail lines or pway scrap with or without attachments lying under or beneath of building/sheds/structures are not deliverable. 10. purchaser need to first dismantle the all buildings/sheds/structures then only delivery will be permitted. fdp 50 days.

CTN :44763801 Due date: 09 Apr, 202609 Apr, 2026 NA
Tender For procurement of machineries electric papad making machine, dough kneader, automatic badi making machine, automatic pickle mixer machine, automatic khakhara making machine, packaging tools, weighing machine, nitrogen flushing machine for establishment of food & spices unit at balarampur village of chatrapur block, ganjam

CTN :44706905 Due date: 09 Apr, 202609 Apr, 2026 NA
Tender For procurement of machineries such as electric papad making machine, dough kneader, automatic badi making machine, automatic pickle mixer machine, automatic khakhara making machine, packaging tools, weighing machine, nitrogen flushing machine for establishment of food & spices unit at balarampur village of chatrapur block, ganjam

State Government

CTN :44611631 Due date: 06 Apr, 202606 Apr, 2026 9.87 Lacs
Tender For rain water disposal work and machine hole clearing work on drainage line at railway ews,vasanat gajendra ews and diff. ews quarters small gully by gully emptier in vatva ward at south zone(arc tender)

State Government

CTN :44636874 Due date: 06 Apr, 202606 Apr, 2026 9.99 Lacs
Tender For rain water disposal work and machine hole clearing work on drainage line at shyamaprasad ews,kushabhauthakarenagar ews and diff. ews quarters small gully by gully emptier in vatva ward at south zone(arc tender)
 Loading, Please wait...

Connect us via What's Up