Latest flux scrap Tenders | Government flux scrap Tenders

Central Government/Public Sector

CTN :45337038

03 Jun, 2026 NA

Gandhidham - Gujarat

Tender For supply of shield gas-mixture for mig/mag welding purpose consisting of 95-99% argon gas to specification is 5760/1998 or latest grade 3 & 1-5% oxygen gas to specification is 309-2005 or latest, filled in cylinders with capacity of 11.3 cum and maximum working pressure of 230 bar with purity certificate and as per the safety requirements furnished in the annexure attached. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45336940

03 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of auto darkening welding shield helmet conforming to equivalent standard en 175 for the shell and en379 for auto-darkening filters and conforming to is 2925 standards. acceptable makes : wh4001, esab, 3m speedglass, yeswelder, karam [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45254908

29 May, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : supply of screen glass for welding hand shield, shade: din12 of size 108mm x 83mm, thickness: 2.7mm-5mm make: scs/auleketro/athermal or similar note: the test certificate issued by the oem should be supplied along with the material. ]

Central Government/Public Sector

CTN :45338923

29 May, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of screen glass for welding hand shield, shade: din12 of size 108mm x 83mm, thickness: 2.7mm-5mm make: scs/auleketro/athermal or similar note: the test certificate issued by the oem should be supplied along with the material. ]

Central Government And Public Sector

CTN :45318158

10 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of electrode size 3.15 mm , electrode size 2.5 mm , electrode size 4 mm , oxygen regulator ty esabdura model 0 10 , muti stage regualator for d.a.ga cylender , cutting nozzle size 1 by 16 , wire brush 6 in , aol fully insuld electrode holder 600amp , welding glass black , cutting torch cottogen , flash back arrester for welding torch mounted , glass plain for welding screen , cylinder opening key , cutting nozzle 3 by 64 in , aluminium welding cabble 400 amps 70 sq mm. , welding copper cable 400 amp , cutting hose blue , cutting hose red , welders hand shield , moulded head screen with head band , chipping hammer , nozzle cleaner , spark lighter for gas stoves , lighter stone , welders hand gloves made of chrome leather

CTN :45337854

05 Jun, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of solid (mig/mag) welding filler wire with shield gas, size - 0.8 mm., class - i to rdso specification irs m: 46/2020 with grade as per is: 6419/2004, the maximum weight of the wire spool should be 12.5 kg. [ warranty period: 30 months after the date of delivery ] ]

CTN :45338062

12 Jun, 2026 NA

Rourkela - Odisha

Tender For supply of 220 amps diesel welding generator with electrical start lombardini, 15 ld 440 diesel engine+ ws220 dc alternator- complete trolley mounted set with 5 liter fuel tank ,battery, minimum 15 meter copper welding cable, earthing cable .plastic shield ,suitable for welding 5 mm rod and auxiliary ac overall rated power output of 7.5 kva or more. make: amer nsm india pvt ltd, honda, miller, kirloskar, kohler or equivalent. [ warranty period: 30 months after the date of delivery ] ]

CTN :45294065

06 Jun, 2026 NA

Tiruvannamalai - Tamil Nadu

Tender For mechanical consumables - m seal each 100 gm / pkt, anabond 202- 100 ml each/pkt, anabond 112- 100 ml each/pkt, anabond 412- 100 ml each/pkt, anabond 666 t - 200 ml (silicon paste), araldite - 200 ml, wd 40 spray - 400ml, rustoline - 500ml, crc 2-26 500ml bottle, 4"painting brush, 3"painting brush, 2" painting brush, water emery medium (standard), emery paper fine, emery paper medium, emery sheet rough, metal wire brush 4" (6 row) with woodern handle, metal wire brush 2" (6 row) with woodern handle, teflone tape 1/2 " roll x 7 meter long., shallac, flex kwik - 20gm, lapping paste 400 gms smooth, lapping paste medium, lapping paste rough, ag4 buffing wheel, ag4 cutting wheel, ag7 cutting wheel, ag7 grinding wheel, hack-saw-frame 12 inch, hacksaw blade 1/2 x 6 inch, hacksaw frame 1/2x6, hacksaw blade 12 x 6 inch, welding glass black, welding glass white, welding leathergloves300mmmlength, welding shield 1/2x12mm, safety goggles, grinding goggle spectacle with plain glass sunline make, gas cutting tourch, gas cutting stone

Central Government/Public Sector

CTN :45147485

29 May, 2026 NA

Hyderabad - Telangana

Tender For corrigendum : tender for supply of welding consumables - welding hand shield armour , , welding wire brush , welding wire brush (stainless steel v grove) , air pipe (100 meters) , gas cutting googles , 11 din black glass , white glass for welding screen , spark lighter , spark lighter stone , spirit level (0.5mm accuracy with magnet) size 30cm , tin cutter - 12 (300mm) , try square engineer esquare 12 inch , tungsten rods 2% thoriated tungsten (red tip) , polyester slings 25mm x 6 meter 1 ton capacity , polyester slings 50mm x 6 meter 3 ton capacity , drum chain 2.5 meter long , capacity 1 ton , chain with o ring and 3 leg , 2.5 m long , capacity 1 ton , octoganal chisel 200mm long x 22mm cutting edge , welding hand gloves , size 18 , spanners , adjustable spanner 300mm 12 , steel rule (set) , measuring tape (set) , allen keys ( six nos set) 4mm to 14mm

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

Flux Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

State Government