Latest flying probe tester Tenders | Government flying probe tester Tenders

CTN :42403021

05 Dec, 2025 33.64 Lacs

Barnala - Punjab

Tender For bid to ras bid to ras bid to ras bid to ras corrigendum : supply of mechanical and electrical engineering lab equipments and furniture c c - wheel balancing machine , diesel fuel supply system , abs system trainer , tool maker microscope , pneumatic reamer , portable digital wattmeter three phase , portable analog ammeter ac , portable analog ammeter dc , portable analog voltmeter ac , portable analog voltmeter dc , phase sequence indicator phase indicator , digital multimeter , analog megger insulation tester , single phase transformer , universal motor , dc servo motor , ac commutator motor , variac single phase , three phase ac to dc rectifier set , digital breakdown voltage tester , inverse time over current relay induction type , earth leakage relay , inverse time over current static relay , relay testing kit , sliding rheostat wire wound , inverter , colour coded resistances , single core wire 4 sqmm , single core wire 2.5 sqmm , room heater , electric kettle , electric switch , voltage stabilizers , electric socket , motor coil winding machine , trainer board to study chopper , trainer board to study dual converter , study of mosfet trainer kit , 8085 microprocessor trainer kit , rs flip flop , multiplexer and demultiplexer trainer kit , model cut section of refrigerator , cut section model of air conditioner , mercury vapor lamp kit , sodium vapor lamp study kit , halogen lamp study kit , neon lamp study kit , trolley type drafting machine with standard accessories , executive table , laboratory table with boxes , lecture stand , laboratory table with drawers , battery for inverter , tachometer , comparator stand , pelton wheel turbine test rig , francis turbine test rig , models of different wooden joints , models of screw threads , models nuts and bolts , models of locking devices , models of keys and cotter joints , models of riveted joints , models of bearing as per assembled drawing , models of pulleys , model of drilling jig , model of machine vice , model of piston , model of connecting rod , model of crank shaft and flywheel assembly , models of different types of gears //bid details 2 / 60

CTN :42738750

06 Dec, 2025 NA

Bangalore - Karnataka

Tender For bid to ras supply of repair of veh c c - ramp assembly removing the vehicles and taken to the machine shop stripping all parts cleaning the burning oil seats springs o rings change and ramp assembled and tested , exhaust brake full device and over hauling and testing , transfer case mounting bracket , transfer case mounting bolt male and female , rotating switch , hand brake assembly , the above mentioned old parts removing and servicing new parts fitting mechanical charges and full electrical system checking and service , 4x4 assembly removing and checking electrifying fault defective and mechanical defective rectified and 4x4 assembly system operated and testing , clutch booster , above parts removing and fitting electrical system full checking and burned damaged looms and lighting service and testing electrical and mechanical labour charges , brake shoe lining with rivet , brake cylinder wheel cylinder front and rear , brake m cylinder , clutch cylinder , sleeve cylinder , brake drum skimming , brake system full removing the vehicle brake drum skimming after fitting the drum, brake shoe lining fitting and above brake m cylinder , self starter assembly stripping checking armature field coil solenoid bendex brush brush holder damaged armature re-winding , self assembly removing the vehicle stripping checking all parts armature field coil solenoid burned armature rewinding field coil , clutch plate , pressure plate , release bearing , clutch master cylinder , bty cult of switch 24v , ignition switch , fly wheel skimming and service , cabin shock absorber , 4x4 assembly , the vehicle electrical system full checking and burned damaged looms change ignition switch battery cut off switch fitting and full light system service and testing charges , gear box assembly removing the vehicle old clutch plate pressure plate release bearing fly wheel removing and gear box service , exhaust brake system removing and electrical fault rectified and mechanical fault removing and brake system mounting the vehicle and brake tested , ramp assembly repair service with damaged and burned oil seal springs o rings change and ramp assembled and tested , van pump assembly not working repair service with new packing kit and pressure testing , door lock assembly , relay 12v and 24v , door mechanism , the above mentioned all parts removing and new parts fitting and vehicle testing mechanical charges , all electrical system repair service burned looms and relay change full lighting system head lights tail lights indicators cabinets lights checking and service labour charge , rotary switch , ramp assembly repairs and service with damage seal kit spring and o rings , the above mentioned parts removing and new parts fitting

CTN :42995224

17 Dec, 2025 NA

Nawanshahr - Punjab

Tender For supply of 3 phase power measurment trainer kit , battery charger , battery for inverter , inverter , earth leakage circuit breaker, single phase , phase sequence indicator , phase sequence indicator , portable digital ammeter , portable digital energy meter , portable digital multimeter , portable digital wattmeter single phase , portable frequency meter , portable moving iron ammeter , portable standard energy meter , three phase lamp load , rs flip flop , t flip flop , multiplexer and demultiplexer trainer kit , parallel operation of alternator , dc series motor , single phase transformer , sepratly excited dc generator , tachometer , synchronous generator , portable digital earth tester , portable digital power factor meter three phase , digital power factor meter single phase , portable digital wattmeter three phase , portable lcr meter , digital flux meter , thermistor kit , lvdt trainer kit , digital clip on meter , analog megger , portable moving iron voltmeter , portable wattmeter , thermocouple trainer kit , digital breakdown voltage testers , inverse time over current relay induction type , earth leakage relay , fuse and mcb testing kit , inverse time over current static relay , display board different wires and cable , display board - different switches , digital megger , single phase power measurment kit , dol starter , electric drill kit , soldering gun kit , motor coil winding machine , dc shunt motor- shunt generator set , dc shunt motor -series generator set , dc motor alternator set , squirrel cage induction motor , slip ring induction motor , single phase capacitor start motor , three phase transformer , variac three phase , stroboscope , synchronous motor 3 phase , kirchhoffs law verification kit , portable digital power factor meter , rlc circuit trainer kit , study of self and mutual inductance measurment trainer kit , dc regulated power supplies , trainer board to study chopper , trainer board to study dual converter , trainer board to study cycloconverter , study of mosfet trainer kit , scr based lamp intensity control , 8085 microprocessor trainer kit , micrcontroller trainer kit , model cut section of refrigerator , cut section model of air conditioner , portable digital lux meter , resistance welding machine 3 phase power measurment trainer kit : 3 phase power measurment trainer kit by using ct (100-50-20-10/5a), pt(400-220/110v) and 3 phase wattmeter, battery charger : scr based automatic 12 v, ac input voltage 230 v, output dc voltage 0-12 v, 0-2 ampere rating provided with voltmeter, ammeter of suitable range, battery for inverter : tubullar lead acid battery min 180 ah, inverter : pure sine wave inverter of rating 1500 va or more, compatible with one 12 volts battery and noiseless operations. , earth leakage circuit breaker, single phase : single phase two pole 230v, 25a, 50hz, 30ma sensitivity, earth leakage circuit breaker, single phase : three phase four pole 400/415v, 25a, 50hz, 30ma sensitivity, phase sequence indicator : phase sequence indicator suitable for 50v-500v ac from 25-55hz, phase sequence indicator : rating 30 sec,500v,burden 15 va, voltage 50-500v, portable digital ammeter : 0-10 a ac, portable digital ammeter : 0-10 a dc, portable digital energy meter : 1-phase 2 wire, 240v, 5a, portable digital multimeter : 3. 5 digit, 1000v ac & dc, 0. 1 mv ac voltage //bid details2 / 72resolution, portable digital wattmeter single phase : digital wattmeter, 4. 5 digit led display, single phase, 230v, 50 hz,0-15a, portable frequency meter : digital, 4 digit led display frequency meter suitable for use on 230 v ac main supply range 20-99 hz, portable frequency meter : vibrating reed type 230 v, having 21 reed 40-60 hz. abs body, portable frequency meter : moving coil type, portable housed in phenolic moulded body with antiparallax mirror. scale and knife edge pointer, range 40-60 hz, 230 v, portable moving iron ammeter : 0-5 ampere ac ammeters portable moving iron, 150 mm uniform scale with

CTN :42984915

10 Dec, 2025 NA

Bangalore - Karnataka

Tender For supply of gear box out put shaft spidal brg both side oled removing and new beding fitting and thread worn out new making and facing and mount the veh , radiator assy required , cooler reapir services and oh , radiator and cooler removing the veh and after service cooler and new radiator assy fitting and veh testing machanical charge , starting trouble ecm required new fitting , relay and loom checking ecm fitting veh starting and running testing mechanical charges , bendex , eld shaft , field coil , labour charges for self stripping service and armature re winsing assembling testing charges , self starter assy removing the veh stripping and checking all parts armature field coil solonid brush beush holder worned. aramature re winding field coil tapping solonoid , nozzle , positioner , cam plate , head assy , cross disc , tappet roller , ac bush , temparature senzor , solonoid switch , packing kit , drive shaft , the above all parts removing and new parts fitting pump asswmblws and calibrating testing with computerised machine and fitting the ceh , spider bearing both side removing and new fitting and mounting the veh including mechanical charges , water pump assy , clutch plate , pressure plate , fly wheel assy , release bearing , gear box rod and shaft removing the veh and taken to the welding shop broken parts cutting and new parts welding thread cutting and new joint full fittng and mounting the veh , gear box assy removing the veh and old parts fly wheel release bearing removing. the above new parts fitting and veh staritng road testing mechanical charges

State Government

CTN :42922367

04 Dec, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply of point machine and variouse other items as per boq attached inspectioon rdso rites consignee - supply of point machine irs type 220 mm stroke clamp type as per irs s$-24/2002 (amendment 1) or latest.(inspection agency:- rdso), supply of q-series led ecr (universal type i.e.qecx-61), 4f/4b complete with plug board(base plate), connectors, retaining clips etc. and conforming to brs: 941a sts / e / relays / ac lit led signal / 09 - 2002, amdt.-1 or latest and rdso spec.no.irs: s - 34, s- 23 or latest, as applicable. the interlocking code for this unit shall be "abdhk". (inspection by rdso)., contactor unit (qbca1 type), 24 v dc, 2hf / 4b complete with plug board (base plate), connectors, retaining clips etc and conforming to brs- 943 and rdso specn. no. irs : s - 34, s- 23, s - 60 or latest, as applicable. th e interlocking code for this unit shall be "bcejk". (inspection by rdso)., q-series magnetically latched neutral line relay (ql1 type), 11f / 4b, 24v dc complete with plug board (base plate), connectors and retaining clips and con forming to brs-935a and rdso specn. no.irs : s - 34, s - 23 or latest, as applicable. the interlocking code for this unit shall be "abdeg.(inspection by rdso)., supply of basic material to construct unit maintenance free earth as per rdso specs. no. rdso/spn/197 ver. 1.0 or latest to achieve a resistance less than 1 ohm. it consist of following:(a) copper bonded steel electrode of minimum 3.0 meter long, minimum 17.0 mm dia with copper bonding thickness of minimum 250 microns and ul listed and marked = 1 no. (b) earth enhancement material supplied in sealed bags of minimum 10 kg = 3 nos. (c) copper strip of 150x25x6 mm, to terminate earth rod = 1 no. (d) copper strip of 300x25x6 mm (meeb) = 1 no. (e) copper strip of 150x25x6mm (seeb) = 1 no. (ii) supply of 35 sq. mm multi strand single core pvc insulated copper cable as per is: 694 for connecting main earth electrode to meeb in the equipment room in duplicate. (minimum 10 meter.) (iii) supply of 16 sq. mm multi strand single core pvc insulated copper cable as per is: 694 for connecting meeb to seeb and spd to meeb (minimum 10 meter.) (iv) supply of 10 sq. mm multi strand single core pvc insulated copper cable as per is: 694 for connecting various equipments to seeb (v) supply of copper lug sleeve for 3/16 cable.(inspection by consignee)., supply of master telephone with voice logging facility for electronic lc gate telephone system as per specification no: rdso/spn/tc-51/2011 revision 3.0 with amendment no. 1 or latest. (inspection by rites)., electronic lc gate slave telephone system with voice recorder as per rdso specification no. rdso/spn/ tc/51/2021 revision 1.0 (inspection agency:- consignee), supply of centralized power supply system 24 volts dc power pack with 7ah mf battery for electronic lc gate telephone system as per rdso spec:- no. rdso / spn / tc / 51 / 2011 (rev. 3.0) amdt - 1 or latest.(inspection agency:- consignee), supply of optical power meter, type-b, as per tec spec. gr / opm - 01 / 03 feb. 2005 or latest. (make & model khushicom-k280) or similar branded make. (inspection by consignee)., supply and testing of optical laser light source of make- jdsu model- ols-35 or similar branded make.(inspection agency:- rites), supply of optical laser torch of reputed make. (make & model-proskit mt-7530) or similar branded make. (inspection agency: - consignee), supply of automatic fusion splicer for single mode optical fibre cable, along with accessories as per tec spec. tec/gr/tx/osm 001/04/sep-12 or latest of make superior/fujikura or similar. consignee shall approve the supply only after successful demonstration at site. (inspection agency:- rites), supply of otdr suitable for 1310/1550nm fiber with resolution of 60 cm, dynamic range of 314/29 db with all accessories for working on single mode optical fiber as per tec spec. tec/gr/tx/otd 001/05/sep-19 or latest, of reputed make like yokogawa/zdsu/viavi or

CTN :42968123

09 Dec, 2025 NA

Bangalore - Karnataka

Tender For supply of repair of veh d d - solonoid , bendex , carbon brush , removing above parts and refitting with new parts labour charges , hand brake assy , self starter armature , field coil , eld shaft , labour charges for self stripping and unserviciable parts removing and self service new parts fitting and testing , engine overheating radiator assy change new fitting , engine collerremoving repair and service and cooling testing , the above mentioned parts removing the veh new radiator and coller fitting and checking testing mechanical charges , push rod , rocker finger , wall cap , nozzle , positioner , td piston , cam plate , tappet roller , tensioner , packing kit , all o rings washer and misc parts , pump stripping all parts cleaning and checking above metioned parts assy pump full assy injector, nozzle fitting, pump calibrating, testing with computerised machine mechanical charges , turbo charge repair service with burning, damage o rings packing parts chane turbo charger full over hauling fitting and testing , spider bearing , the above all parts removing the veh and after service pump turbo, push rod, rocker fingure wall cap fitting and pump all connecting pipe line fitting vah running and testing , km cable , side stand , tapet cover , oil drain nut , wheel bearing , dickey lock , broken parts welding works , front and rear parts , tail light assy , indicator assy , speedometer kit , side mirror , handle , loom set complete , shook abosrber , the above metnioned all parts removing and new parts fitting, vehicle running and testing mechanical charge , armature assy , the self starter stripping and checking all parts. above parts removing and new parts fitting and self starter assy and testing charge , self starter assy repair and service with burning and damaged parts and self testing , relay 12v and 24 v , clutch booster assy , 4x4 pressure line full checking and 4x4 sensor removing and service and fitting pressure testing rotary pump working pump removing the veh and taken to the pump house and pump , tapet roller , tesioner , oaking kit , the above mentioned all parts removing and checking including rotary pump all pipe lines removing and after pump service fitting pipe line connecting clutch booster fitting veh satrting and testing , all electical syste checking, burned looms relays change and veh electrical system testing mechanial charges , strater armature , brush and brush holder , labour charges for self stripping service and new parts soloniod bender assy and self testing mechanical charges , field coil , solonoid switch , the self starter cleanning above mentioned parts remvoing new solonid field coil soldering with brush and self assmbled and self testing labour charges , auxilary realy , battary cut of switch , above parts removing and veh starting checking electrical system all lights and lomms mechanical charges

State Government

CTN :42920788

16 Dec, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply and execution of various signalling equipments as per boq attached inspection rites consignee - fabrication and supply of point rodding (ground connection) set with insulation complete set for electric point machine 220 mm stroke clamp type for thick web switches as per rdso drg no rds0/s/3454 alt -a ver-1 or latest. (inspection agency:- rites), supply and fixing of gi bend pipe 50 mm dia., bclass, for cable entry into point machine with all accessories. note: th is item to be operated independently for those points where point machines are functional, but gi bend pipe is not provided. for all other new installation of point machines, item 06002 of the sor includes the provision of gi bend pipe. (inspection agency:- consignee), supply of point machine ground connection insulation complete set including for p bracket insulation for point machine irs type 220 mm.(inspection agency:- rites), supply of stretcher bar insulation complete set for point machine irs type 220 mm stroke clamp type.(inspection agency: - consignee)., supply of track lead junction boxes fiber glass as per drg.no. cwm - 00597 of f.r.p material to irs.s.23 specification along with fixtures i.e., on ms angle 50x50x5mm, 0.9 meters long two numbers of g.i. pipes of 25mm dia. along with nuts and bolts and 500mm long (this includes gromite bushes, 60mm pbt terminal). (inspection agency:- consignee), supply of aluminium ladders of height 5 feet for maintainer at relay room and ips room of model no: 8226 of youngman, plantex or similar. (inspection agency: - consignee)., supply of lps 3.00 mm thick rolled copper strip of reputed branded make. (inspection agency: - consignee), supply of insulation resistance tester. make fluke 1507 or similar. (inspection agency:- consignee), supply, fabrication and fixing of the calling on board/bslb board as per rdso drg. no. sa 2373 (adv)/stop/warning board as per drg. no. sa-2380 (adv), or as applicable, on concrete foundation and painting with retro reflective paint. all work to be carried out as per railway site engineer instructions.(inspection agency:- consignee), supply, fabrication and fixing of retro reflective signal number plates as per ncr drg. no. typ/14/0014 dtd 28.11.2014 issued vide ncr letter no. s&t/ ncr/drg/typ dated 28.11.2014, on signal post with contractors own material like clamp, u bolts, nuts etc.(inspection agency:- consignee), supply of digital cable fault locator for metallic s&t cables of reputed make as per tec spn no. gr/tie-05/03, july 2006 & tec 73060:2006 like khushicomms model venus 120 orsimilar branded make. consignee shall approve the supply only after successful demonstration at site(inspection agency:- rites), supply and testing of cable route tracer and marker locator model and make 3m dynatel model locator 2273m or reputed branded make.(inspection agency:- rites), supply, installation and commissioning of central gateway. note: single centre gateway shall cater maximum up to 32 data transmitter node (modbus).(as per annexure a) (inspection agency:- rites), supply, installation, testing and commissioning of data transmitter node in location box. modbus type note: maximum range 400 meter. (as per annexure b) (inspection agency: - rites), supply, installation , testing and commissioning of data transmiter modbus cum repeater for augmenting range of ourdoor data transmiter node (modbus), where distance of location box is more than 400 meter with respect to central gateway.(as per annexure c) (inspection agency:- consignee), apparatus case led indication status display unit cum allarm system for yard.single display system shall cater to maximum 45 no of location boxes.(as per annexure d)(inspection agency:- consignee), fabrication, supply and fixing of p, c, a, g, ibs etc. marker disk painted and lettered with enamelled paint of approved colours, on signals, conforming to rdso drg. no.sa - 23456, as per standard practice and technical specifications.(inspection agency:- consig

Flying Probe Tester Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government