Latest foam cushion Tenders | Government foam cushion Tenders

Central Government/Public Sector

CTN :45558049

06 Jul, 2026 NA

Jodhpur - Rajasthan

Tender For supply of rubberised fabrics and ground sheet - jss standard - mk xii (q3)

Central Government/Public Sector

CTN :45555891

06 Jul, 2026 NA

Begusarai - Bihar

Tender For supply of housing for v-ring. specn / drg no:- clw drg.no.- 1209-01.113-002 alt-8 with latest alteration (conforming to rdso modification sheet no. mp.mod.vl-06.38.09 (rev-0) dated 30.11.09) ground to sketch no-2009-18 [ warranty period: 30 months after the date of delivery ] ]

CTN :45072222

18 Jun, 2026 NA

Goa - Goa

Tender For bid to ras repair, maintenance, and installation of plant systems equipments- frame work: ms / rcc, sheet, repair of control console to arrest ingress of water/ humidity by use of qty 20 rcc blocks of dimension 04 feet x 02 feet x 06 inches (height). 2.2 repair of roof of control console to protect against sun light towards ensuring controlled temperature which is required for electronic equipment held in it. the protective structure would consist of vertical square tubes of dimension 40 x 40 mm and length 128 feet clamped onto the side wall body of the container. a horizontal framework 25 x 25 mm of similar raw material (square tube of dimensions 40 x 40 mm, 178 feet length) shall be fixed onto these vertical rods. 2.3 repair of fuel tank. 2.4 repair of qty 02 mtb side platforms used for inspection and adjustment during ground run/ testing of engine. 2.5 provisioning of consumables for maintenance of dg set of the console.

CTN :45544467

30 Jun, 2026 NA

Bikaner - Rajasthan

Tender For supply of black soil treatment to be done by watered and compacted with plate compactor to consolidate the base , excavation of top soil up to depth not exceeding 150 mm deep and getting sift soil , edge wall providing and fixing masonry edge wall 9 inch wide and 12 inch height including grounded around perimeter of court , 01x10 ft x 15 ft shed with 0 point 5 mm ppgl profile sheet fixed on 50 mm ms tube , three seater stainless steel chair with armrest , digital scoreboard 3x2 , two hockey goal post , four pole with led light 100 watt 20 ft height from ground each flood light will have four led light , drainage system for excess water from ground

CTN :45536897

22 Jun, 2026 20.00 Lacs

Leh - Jammu And Kashmir

Tender For supply of site clearance and amp earthwork is 1200 , kero heater , pcc is456 , rcc m20 footing and column and slab , reinforcement steel fe500 , brickwork 230mm is1077 and flooring anti skid , internal plaster 12mm , doors flush and windows alluminum and glass , electrical led and wiring , plumbing and sanitary , ceiling gypsum vip , painting exterior and interior external lighting and poles , water supply tank and pump , transportation and logistics remote area , contingencies and solar panel 5kva and invertor and battery 5kva , generator 5 kva electrical led and wiring is 732 , mirror 5 h 2w ft and bench 5 h 2w ft , chair plastic with arm , toilet sheet western with exhaust fan and water faucet and hand jet assy , electric fitting work , changing room 6 by 6 by 10 ft and bathroom 6 by 6 by 10 f , multipurpose hall structure , chair vip sofa and centre table , podium and tt table and carrom set , yoga mats fire extinguisher , 86 inch interactive pannel , drainage and cement road work tin shed wk on viewer seating iron poles and tin sheet hooks screw and iron channel , ground civil work , excavation work

CTN :45542106

22 Jun, 2026 1.33 Lacs

Patiala - Punjab

Tender For providing fixing and installation of fire material for fire station mc patiala. est cost rs. 1.33 lacs dt 22/23.06.2026 - xlpeinsulatedarmouredcables (loose):supply, laying and erection of aluminium conductor xlpe insulated pvc sheathed armoured and served cable 1100 voltsgradeasper is7098 (part-1)1988 tobe laid loose intheexistingtrenchorpipeas per pwd general specifications overall size 35sq.mm (4core) armoured(loose), mccbs (for panels & sheetenclosure):supply and erection of moulded case circuit breaker (panel mounting cubical type) in the existing cubical panel (confirm to iec:60947-2) having ics=100% icu, 100% neutral with spreader terminal links,extendedrotary handle and relevant pwd general specificationscompletewithg.i. bolts, nuts &connection on both sides of mccb with suitable size of thimbles etc:mccbfourpole200amp.,415volts, 25ka fixed magnetic and adjustable thermal setting, sheet metal bus barchambers (copper strips):supply and erection of sheet metal bus bar chamber (factory fabricated) duly powder coated on existing surface with required 4 nos.of tin plated copper bus bar strips of suitable length and cross sectional area mounted on dmc/ smc mouldsat sufficient distance, enclosure made of m.s. sheet 1.6mm thick with hinged cover and lock, fitted with dust excluding gaskets and secured with sufficient no. of cadmiumplated iron screws and of given overall dimensions and to be fixed with g.i.bolts and nuts/ ragbolts and nuts etc. complete with all accessories including connections with suitable size of thimbles, bonding to the existing earth and painting etc. as desired by the engineer-in-charge at site:bus bar chamber 200amp., 415volts overall dimensions (455mm x 455mm x 150mm) nominal, supply and erection of heavy duty aluminium thimbles/lugs for cable endtermination duly crimped including making necessary connectionscompletely aluminium thimble cable core size 2535sq.mm, earthing with g.i.wire/ rope ing.i.pipe partly recessed and partly on surfacecomplete with 150 cm long 50mm dia.g.i. earthpipe (cutting threads and 36 nos. holes, 1cmdia. to makeamesh around the gi pipe) withg.i. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with20kg. charcoal & salt mixture etc., upto 8 metre in length (including boring & refilling). earthing with 8 s.w.g. (4mmdia.)g.i.wirein 15mm dia g.i. pipe with g.i. reducing socket 50mm x 15mm (upto 8metre in length), supply of mccb enclosure in all respects make lk/havells, supply of clump 1" g i, supply of screw 1.5"with gutty

CTN :45553087

23 Jun, 2026 13.99 Lacs

Pathanamthitta - Kerala

Tender For work name :ridf xxvii- providing and installing furnitures at smart krishibhavan in mezhuveli in pathanamthitta district (retender) - basement floor- ecoshop,seedling storage and bio pharmacy, visitors chair 3 seater - perforated sheet visitors chair - ss-godrej/featherlite / equivalent quality class, corner stand:- by using good quality marine plywood with mica finish of size - 90x30x90cm, window curtain:- by using good quality zebra blinds window curtain with all fitting accessories of size - 120x150cm, staff table: - by using good quality both side laminated particle board, drawer and cupboard , with sliding keyboard and file manager , provision for cpu/ups ,telescopic channel for drawers, hinges for cupboard, handle etc complete of table of size -150x120x75 cm, medium back revolving chair, hydraulic lift, cushion seat and back with arm rest, visitors chair:- on s type frame with cushioned seat and back, storage cupboard:-bottom storage cupboard with door by using good quality multiwood/plywood with mica finish , ss handle, of size - 2.5 x2.5x0.60, powdercoated steel shelf for keeping seeds, etc.., supermarket rack:- by using good quality marine plywood with mica finish with all fitting accessories of size - 210x150cm., sliding mesh:- by using good quality powder coated aluminium channel steel mesh , with all fitting accessories , of size - 280x60cm, storage cupboard:-bottom storage cupboard with door by using good quality multiwood / plywood with mica finish, ss handle, of size - 300x60x75cm, wall fan, ground floor- office and waiting area, visitors chair 3 seater - perforated sheet visitors chair - ss, corner stand:- by using good quality marine plywood with mica finish of size - 90x30x90cm, window curtain:- by using good quality zebra blinds window curtain with all fitting accessories of size - 120x150cm, staff table: - by using good quality both side laminated particle board, drawer and cupboard , with sliding keyboard and file manager , provision for cpu/ups ,telescopic channel for drawers, hinges for cupboard, handle etc complete of table of size -150x120x75 cm, computer table - by using good quality both side laminated particle board, drawer and cupboard , with sliding keyboard and file manager , provision for cpu/ups ,telescopic channel for drawers, hinges for cupboard, handle etc complete of table of size -150x120x75 cm, medium back revolving chair, hydraulic lift, cushion seat and back with arm rest, visitors chair:- on s type frame with cushioned seat and back-godrej/featherlite / equivalent quality class, storage cupboard:-bottom storage cupboard with door by using good quality multiwood/plywood with mica finish , ss handle, of size - 300 x60x75cm, supermarket rack:- by using good quality marine plywood with mica finish with all fitting accessories of size - 210x150cm., wall fan, gypsum ceiling : supply,conveyance ,installation of gypsum ceiling with material and labour charge etc complete of size 4.0x3.60, l type table: - by using good quality marine plywood with mica laminate finish and inside laminate finish, drawer and cupboard , telescopic channel for drawers, auto hinges for cupboard, steel handle etc complete of table of size -180x75x75cm and side table of size - 100x40x75cm, printer table: - by using good quality marine plywood with mica laminate finish complete size -100x60x75 cm, first floor- conference &training hall, gypsum ceiling : supply,conveyance ,installation of gypsum ceiling with material and labour charge etc complete of size 8x4.3, conference hall paneling:- wall panneling :- providing and placing a wall paneling on wall with decorative front view as per design and drawings using good quality 9mm/12mm marine plywood, supporting 16mm ply, with decorative lamination and all accessories etc completed .of size -2x8x2.1, dias stage:- providing and placing dias stage on conference hall, as per design and drawings using good quality marine ply wood including all fitting accessories etc. comple

CTN :45410586

17 Jun, 2026 NA

Patiala - Punjab

Tender For bid to ras supply of self ballasted led lamps (led bulb) (v3) conforming to is 16102 (part 2) (under bis scheme - ii) (q2) , led bulkhead light (q3) , led batten light (led tube light) (v2) (q2) , led batten 20 w invertor , pvc aluminium cable 2 x 10 sq mm , mccb tpn 400 amp 4 pole 50 ka , plate rack stainless steel size 900x 750 mm , ci bracket for kitchen sink , gi pipe medium grade 20 mm , gi pipe medium grade 15 mm , hydraulic door closer , waste coupling brass 32 mm , solar road stud , pre laminated particle board of size 8x4x18mm , plywood commercial 7x3x12 mm , plywood commercial 8x4x6 mm , plywood commercial 8x4x12 mm , plywood commercial 8x4x4 mm , fevicol 1 kg , foam cushion for sofa seat of size 530 x560x100 mm thick of 40 density , pvc seat for chair dining with holes , seat and back for writing map , pvc seat and back for chair verandha , ht xlpe cable size 95 sq mm 3 core , desert cooler steel body , double angle valve 15 mm cp brass , cp shower rose 15 mm , sliding door bolt 100mm , sliding door bolt 200mm , pre laminated particle board of size 8x4x18 mm , plywood one side teek wood 8x4x4mm , exhaust fan 300 mm , exhaust fan 380mm , exhaust fan 450 mm

Central Government / Public Sector

CTN :45548465

06 Jul, 2026 NA

Hyderabad - Telangana

Tender For corrigendum : tender for hyderabad division: wooden flooring for indoor kabaddi court at rsc/sc, 2) miscellaneous repair works like approach road towards swimming pool, concrete work adjacent to roads for widening, improvement of garden in rsc ground and outside gate, construction of drain for easy flow of underground rain water at tennis court, providing of fencing on the compound wall at addagutta side, false ceiling repair work in manager room, repairs to rwhp in front of hockey stadium, renovation of toilet at admin block, prevention of leakage from gi sheet, construction of garbage bin, wbm road in front of multipurpose stadium and construction of toilet in existing store room at football ground

Central Government/Public Sector

CTN :45555211

16 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of one coach set of pu foam cushioning material for lslrd coaches consisting of: 1. 329-6-1-098, alt-c, item 2 = 6 nos, 2. 329-6-1-098, alt-c, item 3 = 6 nos, 3. 329-6-1-098, alt-c, item 5= 7 nos, 4. 329-6-1-098, alt-c, item-4 = 7 nos, 5. 836-6-1-002, alt-b, item 3 = 2 nos, 6. 836-6-1-004, alt-a, item 5 = 2 nos, 7. 836-6-1-006, alt-b, item - 3 = 2 nos, 8. 329-6-1-097, alt-g, item-2 = 2 nos. cushioning material shall beof pu foam conforming to rdso specification rdso/2007/cg-04,rev.01 or latest. note: firm has the option foroffering seats and berths cushion with lower density conforming to spec.rdso/2007/cg-04,rev-01 or latest also. please visit icf vendor portal for downloading drawing https:// vp.icf.gov.in/ vendtendordetnew.php using key 0726k0hm1k02335 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Foam Cushion Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector