Latest foam nozzle Tenders | Government foam nozzle Tenders

Central Government/Public Sector

CTN :45449820

26 Jun, 2026 NA

Raigad - Maharashtra

Tender For supply of multipurpose water cum foam nozzle

Central Government/Public Sector

CTN :45392875

02 Jun, 2026 NA

Mysore - Karnataka

Tender For supply of fire retardant pvc covering for cable protection with worm clip suitable for lv coupler of garib rath coaches as per s. lnternationals part no. si/sa/4a and rcf spec no. rcf/el/ac/57 (rev.-a) corr-l,2 & 3, amendment no. 1 & 2 or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45335459

12 Jun, 2026 NA

Ajmer - Rajasthan

Tender For supply of neoprene rubber cap (canopy) for condensor motor protection from rain water as per sr.dee (chg) bct's drawing no. raj/253/06 dt. 26/12/2006 , neoprene rubber grade hardness : 50-55 material shall be fire reterdant as per is: 7809 part - ii & rubber is as per irs r- 48-88. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs] ]

State Government

CTN :45352418

18 Jun, 2026 2.26 Lacs

Korba - Chhattisgarh

Tender For procurement of portable ground water cum foam monitor with aqua foam nozzle for firefighting division, htps, korba west

Central Government And Public Sector

CTN :45282791

25 May, 2026 NA

Raipur - Chhattisgarh

Tender For supply of led based light for under catwalk application, with input power 16 watt ( 12 leds matrix) with 48 v ac. specn: input voltage 48vac +-10%, input voltage 16 watt, power factor >0.95, led matrix 12 leds matrix, appropriate light output 1300-1400 lumen, led driver-high brightness driver system, reverse polarity protection-yes, short circuit protectionyes, open circuit protection yes, material and insulation of driver - fire retardant material (abs & poly carbonate) diffuser- p-12 ip-67. the details as under : (mounting-surface / recessed, housing-pdc aluminium, colour-white, protection-ip 67, impact resistance-ik 10, wire-pvc insulated 3 core (phase, neutral & earth), input wattage at 48v ac-16 w +/- 10%, operating voltage-48v ac +/- 10%, power factor >/=0.95, driver type-constant current, led make-osram/cree/seoul/lumileds/bridgelux, led type-smd, protection-reverse polarity protection, short circuit protection, open circuit protection, luminous efficacy >/= 80 lm/w, colour temperature-5700k (approx), led life span-50,000 hrs, cover-toughened glass with prizmatic diffuser.) [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45124160

21 May, 2026 45.00 Lacs

Jaipur - Rajasthan

Tender For purchasing work of essential fire safety and rescue equipments - sledge hammer head material: alloy steel handle material: plastic & rubber product dimensions: 80 cms item weight:5 kg. grip type : contoured head style: flat, crow bar made out of carbon steel duly hardened thickness: 20 mm : : 22 mm : : 25 mm : : 28 mm : size: 900mm : : 1200mm: : 1500mm: : 1800mm:, fireman axe certification: - material: - carbon steel voltage test: - 20,000 volt weight: - 1.5-2.5 kg overall length: - up to 2ft handle material: - wood note: a valid product approval certificate for the proposed brand/make, issued to the firemans axe oem, must be attached to the technical bid. bids received without the oems approval certificate will not be considered further and will be disqualified from price-bid opening., fire fighting helmet style: protection, safety isi marked: is: 2925 of 1984 shell material: high density polyethylene (hdpe) strap material: low density polyethylene (ldpe) adjustable chin strap: nylon chinstrap and rachet type head band slot fix design: provision for easy clip on accessories like face shields and earmuffs colour- yellow adjustable and detachable head band., gum boot indian standard for gumboots:is 15298 (part 2): covers safety footwear, including pvc gumboots with steel toes (often referred to in industrial settings for impact resistance) is 5852: refers specifically to protective rubber knee boots (commonly used in mining, construction, and agriculture).steel toe - gumboots / industrial & construction footwear flexisafe isi marked steel toe pvc gumboots, is:5852 certified safety shoes for industrial, agriculture, mining and rainwear use | waterproof, anti-slip, oil resistant., ceiling hook (fire hook) hook: - forged steel handle: - bamboo pole (3 mtrs length) length (approx.): - 3.0 mtrs weight (approx.): - 3.5 kgs, life jacket technical specifications of solas life jackets adult a-1 are as under; solas lifejacket a-1, adult (pfd) is approved by the indian register of shipping (irs) as per latest international solas regulations, with valid certificate weight: 1.000- 1.100 kgs dimensions: length 45 cms x 68 cms x 8cms floatability of above 16.5 kgs comfortable to wear with a shirt like fit. extremely lightweight and slim in design it can be donned in one way only, in a period of 1 minute without assistance, guidance or prior demonstration has heavy duty buckles for fastening has sufficient buoyancy, with 7 pieces of 10mm foam each in the front and 2 pieces of 10mm foam each in the back, to lift the mouth of an unconscious wearer not less than 120mm clear of the water as per latest solas & lsa regulations the materials used for the covers, tapes and seams of the solas lifejacket a-1, adult (pfd) shall be tested as per iso 12402-7, at government approved laboratories to establish that they are rot proof, colour fast and resistant to deterioration from exposure to sunlight and are not unduly affected by seawater, oil, fungal attack and meet all criteria of tensile and strength shows no deterioration after immersion in diesel oil for 24 hours meets the body strength and shoulder strength test prescribed in solas, regulations, wherein a load of 326 & 90kgs respectively are attached for a period of 30 minutes and then there is no physical deterioration in the lifejacket fitted with approved retro reflective tape of 31 at four strategically high places on the lifejacket for immediate and maximum visibility does not sustain burning or continue melting after being totally enveloped in a fire for a period of 2 seconds fixed with a buddy line of 1.5 meters for rescue as per latest specifications a special feature of solas lifejacket a-1, adult (pfd) shall be such that being extremely slim and lightweight can be easily stacked and stored, saving valuable storage space meets solas 74 as amended, reg iii/4. iii/7.1, iii/34, x/3 lsa code, reg.i/1.2 and ii/2.1.1, msc.207(81), imo resolution msc 81(70), msc 200 (80), msc 226(82

Central Government/Public Sector

CTN :44956607

01 May, 2026 NA

Ernakulam - Kerala

Tender For supply of 2.5" potable foam nozzle for rig vessel , supply of 4" fire monitor for rig vessel , supply 3" fire monitor for rig vessel

Central Government/Public Sector

CTN :44736841

17 Apr, 2026 NA

Raigad - Maharashtra

Tender For request of budgetary quote for supply, installation, testing and commissioning of safety circle inside port premises near immigration center 1). signage led screen with metal fabrication support metal fabrication for screen & logo providing and installing branding led circular shape screen, including supply of led display. panel. ms fabrication frame structure with proper support, anchoring and alignment, internal wiring, power supply arrangement, weather protection, testing and commissioning. complete in all respects as per approved design and site requirements. 2). turbine tree 3). fountain providing, supplying, installing. testing and commissioning of 10 nos. 1" foam nozzles with accessories and 16 nos. 12v, 18w underwater rgb led lights. supply and installation of 2 nos. kirloskar brothers limited make 5hp, 440v open well pumps with related fittings. providing and commissioning of 2 nos. electrical control panels with dol starter, elcb and overload protection system. complete upvc astm plumbing inside pond and 150 meters of 0.5 sq.mm x 4 core isi flexible cable for pump and lighting work. 4). mosaic tiles in fountain/pond area 5). providing and fixing mosaic tiles in fountain/pond area, including cleaning and surface preparation, application of waterproof adhesive, proper laying with alignment, epoxy grouting of joints, edge finishing and curing, complete in all respects as per site requirements water proofing providing and applying waterproofing treatment to fountain/pond area, including surface preparation, crack filling, application of approved waterproofing chemical/compound in required coats, curing, and testing for leakage, complete in all respects as per site requirements. 6). light pole providing and erecting metal street light pole of approved height and design, base plate, anchor bolts, internal wiring provision, painting/coating for corrosion protection, and complete installation in all respects as per site requirements. 7). acrylic signage providing and fixing acrylic signage, including laser-cut acrylic letters, uv printing as required, ms frame for support, led backlit provision. proper alignment and mounting, complete in all respects as per approved design and site requirements. 8). rcc work providing and laying rcc slab of m25 grade having thickness 250 mm to 300mm 9). bermuda carpet effect grass with plants providing and executing landscape work including preparation and dressing of soil, supply and plantation of approved shrubs, ornamental plants and trees with manure and watering system, laying of natural/lawn grass with proper leveling and rolling, and decorative pebble work around plants and pathways for aesthetic finish, complete in all respects as per approved layout and site requirements. 10). granite top & wall cladding with required wall & plaster work providing and fixing granite top and wall cladding work, including required surface preparation, necessary wall construction plastering, adhesive fixing, proper alignment, joint filling, edge polishing and finishing. complete in all respects as per approved design and site requirements. 11). electrical lights & points providing, supplying. installing. testing and commissioning of electrical main line including supply and laying of required cables, conduits, distribution connections, and complete wiring for all lights, along with supply of fixtures, fittings, accessories, labour charges and testing, complete in all respects as per site requirements. 12). main line of water supply & return providing, supplying. installing. testing and commissioning of main water supply and return line system, including excavation, supply and laying of approved quality pipes, fittings, valves, joints, supports, connection to pumps/tanks, pressure testing and commissioning, complete in all respects as per site requirements. 13). ss metal logo on top providing and installing 12 feet height ss-(stainless steel) metal revolving logo structure, including

Foam Nozzle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector