Latest fork lift repair Tenders | Government fork lift repair Tenders

Central Government/Public Sector

CTN :45297350

28 May, 2026 NA

Kapurthala - Punjab

Tender For set of carline complete for lhb ac 2tier amrit bharat 3.0 coaches., as per drawing: mp26ab3ac2tcarl version 0, packing instruction: carline assly the supplier shall pack the three c/set (segments) of carlines in a suitably designed robust returnable metallic cage/structure in such a way that carlines shall not get entangle, damaged, twisted, dented during transportation, storage, handling and lifting and to avoidscratches on outer surface suitable environment friendly cushioning material is to beplaced between two segments, transit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear approximate 1.5 tonne material load in static & moving condition of three coach set of carline. the bottom part of this packing cage/pallet should be such that curvature profile of bottom carline should match with the profile of packing cage and it can accommodate fork lifter arms for lifting and transportation. it should have standard clamping/fastening mechanism to facilitate easy unpacking & unloading. it should have firm's identification/color mark. the packing cages along withset of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open sky. packing slip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45283760

22 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply of set of carline for lhb ac tier amrit bharat 3.0 with flat roof, as per drawing:mp26carab3tf version 0, packing instruction: carline assly the supplier shall pack the three c/set (segments) of carlines in a suitably designed robust returnable metallic cage/structure in such a way that carlines shall not get entangle, damaged, twisted, dentedduring transportation, storage, handling and lifting and to avoid scratches on outersurface suitable environment friendly cushioning material is to be placed between two segments, transit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear approximate 1.5 tonne material load in static & moving condition of three coach set of carline. the bottom part of this packing cage/pallet should be such that curvature profile of bottom carline should match with the profile of packing cage and it can accommodate fork lifter arms for lifting and transportation. it should have standard clamping/fastening mechanism to facilitate easy unpacking & unloading. it should have firm's identification/color mark. the packing cages along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open sky. packing slip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45270807

26 May, 2026 NA

Kapurthala - Punjab

Tender For set of carline, as per drawing: mp19carvp version 2, packing instruction: carline assly the supplier shall pack the three c/set (segments) of carlines in a suitably designed robust returnable metallic cage/structure in such a way that carlines shall not get entangle, damaged, twisted, dented during transportation, storage, handling and lifting and to avoid scratches on outer surface suitable environment friendly cushioning material is to be placed between two segments, transit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear approximate 1.5 tonne material load in static & moving condition of three coach set of carline. the bottom part of this packing cage/pallet should be such that curvature profile of bottom carline should match with the profile of packing cage and it can accommodate fork lifter arms for lifting and transportation. it should have standard clamping/fastening mechanism to facilitate easy unpacking & unloading. it should have firm's identification/color mark. the packing cages along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open sky. packing slip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45255491

09 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of battery operated fully electric pedestrian hydraulic pallet truck as given below and as per specification enclosed. capacity 1.5 ton having following specifications: capacity: 1500 kg, load center: 600 mm, fork length: 1150 mm, lowered height: 80 mm, lifting height: 115 mm, width over fork: 540 mm, turning radius: 1330 mm, drive motor rating: 650 watts, lift motor rating: 500 watts, travel speed without load: 4.8 km/hour, travel speed with load: 4.6 km/hour, battery: lithium ion 36 volts/24 ampere hour. make/model no: jungheinrich pte 1.5_540*1150 li-ion (or) ep equipment (or) eoslift (or) apollo (or) hyster (or) aequanta. (or) toyota (or) godrej (or) maini (or) voltas (or) jost (or) hydraumech (or) nilkamal or similar. note: 1) the firm should specify the make and model no. and attach catalogue/leaflet along with offer, otherwise offer will not be considered. [ warranty period: 30 months after the date ofdelivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45267033

11 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of hydraulic hand pallet truck ,capacity 2.5 ton, fork material-mild steel or stainless steel, fork wheel/steering wheel-nylon, fork arm length-1100-1200mm, fork arm width 550-600 mm, lifting height- 110-120mm, lowered fork height-85-90mm, make-josts/godrej/nilkamal/kijeka [ warranty period: 30 months after the date of delivery ] ]

CTN :45155242

26 May, 2026 NA

Delhi - Delhi

Tender For supply of fork extension for the existing electric fork lift platform (make- godrej, model- gx 300e) technical requirements: 1. material & construction: high-strength mild steel with hallow type structure , designed for easy sliding over existing forks, provided with locking pins or heel restraints to secure fork extension against accidental slipping, formed heavy-duty rectangular steel sections with closed tips,internal reinforcement to prevent bending or torsional twist. smooth welds, free from cracks, undercuts, or surface defects. rounded edges to prevent damage to loads, tapered front end for easy pallet entry. 2. dimensions: length- 2250mm (without locking arrangment), length- 2400mm(with locking arrangement), width- 150mm height- 80mm (opening/hollow side), height- 25mm (closed side) thickness of material :min. 6 mm (close fit to avoid lateral movement) 3. load capacity: safe working load (swl) = 3ton 4. finish: coated with anti-corrosion primer with industrial-grade enamel powder coating (safety yellow or black) final finish. ]

CTN :41838292

13 May, 2026 NA

Chamoli - Uttarakhand

Tender For bid to ras corrigendum : supply of pallets of 155mm arty ammunition , pallets for 105mm arty ammunition , rough terrain fork lift truck (3-5 ton) , hand lifting pallet (3 ton)

CTN :44856646

06 May, 2026 NA

Delhi - Delhi

Tender For bid to ras supply of heavy duty racking with conveyor system , platform weighing scales , reach truck , hydraulic mobile crane , hydraulic hand pallet trucks , platform type flat trolleys , electric fork lift trucks , auto strapping machine , aluminium partition with furnished office cubicle (ac+ files cabinet , advance integrated security and access control system , heavy duty pallets , battery operated platform trucks

CTN :45067334

14 May, 2026 NA

Bidar - Karnataka

Tender For providing of repair and overhauling service - repair of godrej fork lifter - repair of 07h000958y god fork lifter

CTN :45046251

07 May, 2026 NA

Gwalior - Madhya Pradesh

Tender For corrigendum : providing of repair and overhauling service - repair of godrej fork lift; repair of godrej fork lift; yes; buyer premises, service provider premises,repair and overhauling service - repair of beml tractor; repair of beml tractor; yes; buyer premises, service provider premises

Fork Lift Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector