Latest fortification Tenders | Government fortification Tenders

State Government

CTN :45316698

02 Jun, 2026 61.5 Thousand

Jummu - Jammu And Kashmir

Tender For labour engaged on account of bush cutting/ jungle clearance/ handling/ cleaning/ stacking of material at divisional store located at tube well no. 18 and tube well no. 09 and allied works

CTN :45309224

16 Jun, 2026 NA

Birbhum - West Bengal

Tender For comprehensive cleaning with tree trimming, bush/grass cutting with necessary area grading along the peripheral boundary wall of bktps (phase-iii, 2026-27).

CTN :45317649

05 Jun, 2026 9.75 Lacs

Bokaro - Jharkhand

Tender For making of 325 nos. of subsidence pillars over proposed panel- o of 4,5 and 6 incline (200 nos) and panel-l of 7 and 8 incline (125 nos) and bush cutting 68300 sqm of dhori (k) colliery

CTN :45304567

08 Jun, 2026 4.60 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of vankulathuvayal stadium in azhikode grama panchayath in azhikode lac, kannur -supply and installation of outdoor gym equipment - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is made by 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405586/2025-2026 leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500 mm. main frame - 114 mm od ?b? class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is 60 mm od b? class gi pipe. seat frame - 42 mm od b class gi pipe. leg press back rest should be angled in 120 -130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. link connected with frame by 8 mm thick laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s- pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brand. pin 25 mm m.s. bright bar pin. bearing bushes - 60 mm od seamless pipe. circlip? a 24 circlips are used for assembly. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405583/2025-2026 back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm od b g.i pipe. seat rest pipe 42 mm od b class g.i pipe. handl

CTN :45303018

02 Jun, 2026 NA

Srinagar - Jammu And Kashmir

Tender For supply of milestone board with steel frame 5 x 2 feet , heating pillar , center table , peg table , full plate , quarter plate , bowl , spoon , fork , big bowl , napkin holder , tray wallnut , cutlery , microwave , towel large , towel small , doormat , ro candle 10 inch for 50 lps ro , ro candle for 20 lps ro , clutch wire for bush cutting machine , green cloth blazer , mirror 1x1.5 ft , jhumer , flex banner with pipes , name tab , water bottle 20 ltr plastic , apron cloth , tea thermos 2 ltr , focus light , aluminium partition panel , tyre pressure pipe , hd lamination flooring

Central Government/Public Sector

CTN :45261947

28 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - ms scrap cut of condemned wagons 8 wheeler (bg) with out wheel set and trolly , delivery on nagra siding condition, wagon no. (1)cr 81018560199 bwta (2) nr 81038516466 bwta (3)cr 81018560274 bwta (4)nr 81038960399 bwta. note : delivery on actual weighment basis maximum permissible deliverable qty is lot qty 04 nos(79.120 mts). returnable items(1) buffer plunzer (2) buffer socket (3) draw bar hook (4) draw bar key (5) screw coupling (6) draw bar spring (7) rubbing block(8) draft link (9) hand brake screw rod with bracket & with leave bush (10) hand brake spindle rod long and short with bracket , note -cutting allowed for easy loading returnable items will notbe delivered and willbe returned by the purchaser lot qty 04 nos(79.120 mts) on approx basis , advice note no.25-03385 dt-20.03.26 and 25-03387 dt-20.03.26 note: wagon lots to be sold on number basis and delivery in mts basis. purchaser sould read the nagra siding condition of special condition of e-auction governing the sale at page 13 (r) page 17 and satisfiy them selves before biding. note-as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot

Central Government/Public Sector

CTN :45261949

28 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - ms scrap cut of condemned wagons 8 wheeler (bg) with out wheel set and trolly , delivery on nagra siding condition, wagon no. (1)nr 81038660213 bwta (2) nr 81248960028 bwta (3)def 80248860017 bwta (4)nr 81038615855 bwta. note : delivery on actual weighment basis maximum permissible deliverable qty is lot qty 04 nos(78.390 mts). returnable items(1) buffer plunzer (2) buffer socket (3) draw bar hook (4) draw bar key (5) screw coupling (6) draw bar spring (7) rubbing block(8) draft link (9) hand brake screw rod with bracket & with leave bush (10) hand brake spindle rod long and short with bracket , note -cutting allowed for easy loading returnable items will notbe delivered and willbe returned by the purchaser lot qty 04 nos(78.390 mts) on approx basis , advice note no.25-03385 dt-20.03.26 note: wagon lots to be sold on number basis and delivery in mts basis. purchaser sould read the nagra siding condition of special condition of e-auction governing the sale at page 13 (r) page 17 and satisfiy them selves before biding. note-as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot

Central Government/Public Sector

CTN :45296595

01 Jun, 2026 NA

Bangalore - Karnataka

Tender For providing of facility management services - lumpsum based - estate maintenance & office housekeeping services; housekeeping, sweeping dusting, mopping, floor cleaning, sanitization, gardening, bush cutting and other cleaning services; consumables to be provided b..

Central Government/Public Sector

CTN :45281139

01 Jun, 2026 NA

Bangalore - Karnataka

Tender For providing of facility management services - lumpsum based - lumpsum based - estate maintenance & office housekeeping services; housekeeping, sweeping dusting, mopping, floor cleaning, sanitization, gardening, bush cutting and other cleaning services; consumables ..

Central Government And Public Sector

CTN :45268312

03 Jun, 2026 20.47 Lacs

Kolhapur - Maharashtra

Tender For supply of material for the work of restoration of fallen fortification wall and bastions at various location of panhala fort, panhala, dist-kolhapaur. as specified in the boq. - description of works, supply of natural double screened river sand, granular in shape, free from silt and dust, confirming to latest is including supply at site of work i.e. hill top of panhala fort etc. complete and as directed by work incharge., supply of surkhi obtained from well burnt brick free from dust including supply at site of work i.e. hill top of panhala fort etc. complete and as directed by work incharge., supply of un-slaked lime best quality (as an when required) obtained from (katni m.p.) quarry, confirming to latest is including supply at site of work i.e. hill top of panhala fort etc. complete and as directed by work incharge., supply of best quality jagerry including supply at site of work etc. complete and directed by work incharge., supply of best quality hirda fruit including supply at site of work etc. complete and directed by work incharge., supply of best quality gum including supply at site of work etc. complete and directed by work incharge., supply of best quality bel fruit including supply at site of work etc. complete and directed by work incharge., supply of best quality methi including supply at site of work etc. complete and directed by work incharge., supply of best quality white kattha including supply at site of work etc. complete and directed 7.63 kg 1008.00 7686.00 by work incharge., supply of best quality black dal including supply at site of work etc. complete and directed by work incharge., supply of brick aggregate obtained from well burnt brick free from dust including supply at site of work etc. complete and as directed by work incharge., supply of rcc tank for slacking lime which is made out in rcc of size 1.20x1.20x0.90 mtr. height with 0.075 mtr. thickness of wall including supply at site of work etc. complete and as directed by work in-charge., supply of specially made out gi pan for making traditional lime mortar of size 2.40x1.20 mtr. and 0.40 mtr. in height including supply at site of work etc. complete and as directed by work in-charge.

Fortification Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector