Latest foundation plinth Tenders | Government foundation plinth Tenders

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

Central Government/Public Sector

CTN :45740448

20 Jul, 2026 38.00 Lacs

Dehradune - Uttarakhand

Tender For repair/ replacement of ac, refrigerator, water cooler geysers internal electric supply of building submain, db, ceiling, exhaust, wall mounting, pedestal fan and its connected works in tech and residential area of irde under ge (i) rnd dehradun

Central Government/Public Sector

CTN :45491026

07 Jul, 2026 9.00 Lacs

Pakur - Jharkhand

Tender For corrigendum : maint repair of ceiling exhaust pedestal fan and geysers alongwith flameproof lights fans and allied works at various md accn at af stn singarsi under age i af singarsi

CTN :45560197

06 Jul, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - metro depot and stations; annual rate contract of pedestal and wall-mounted fans; service provider

Central Government/Public Sector

CTN :45707572

15 Jul, 2026 20.00 Lacs

Naliya - Gujarat

Tender For repair/replacement of ceiling fan, exhaust fan, wall fan, pedestal fan at domestic and technical area at af stn naliya

CTN :45696683

11 Jul, 2026 10.00 Lacs

Sohagpur - Madhya Pradesh

Tender For नगर परिषद सोहागपुर अंतर्गत हेन्डपंप मरम्मत सामग्री क्रय करने हेतु वार्षिक निविदा आमंत्रण बावत् - regarding annual tender invitation for purchasing hand pump repair material under municipal council sohagpur. - . - , axle i.s.i. mark, chain nut bolt i.s.i. mark, cylinder complete i.s.i. mark, flanger brass complete i.s.i. mark, flanger jhula brass i.s.i. mark, g.i. pipe with socket 1 1/4 inch i.s.i. mark 9 kg/m, hand cover i.s.i. mark, handpump chain i.s.i. mark, handpump connecting 12 m.m. rod i.s.i. mark, handpump cylender liner, handpump handle i.s.i. mark, handpump leather cap, handpump leather wisher, handpump pedestal adjusting size 1 1/2 fit i.s.i. mark, handpump pedestal adjusting size 1 fit i.s.i. mark, handpump pedestal adjusting size 2 fit i.s.i. mark, handpump pipe die i.s.i. mark, handpump rod die i.s.i. mark, handpump set complete 30 mtr with fitting i.s.i. mark, handpump slip ring, handpump pipe socket, handpump rod socket, head assembly i.s.i mark, lifter 1 1/2 inch i.s.i. mark, lower valve brass complete i.s.i. mark, upper valve brass complete i.s.i. mark, leather washer extra strong c.l.m.s. company i.s.i. mark, nut bolt 2 inch, pedestal i.s.i. mark 7.5 inch, rod socket 12 m.m i.s.i. mark, rubbar ring i.s.i. mark, rubber sit stainer i.s.i. mark, bearing 6204 i.s.i. mark, water chamber i.s.i. mark, wise (handpump) i.s.i. mark, handpump cylender cap

Central Government/Public Sector

CTN :45693063

14 Jul, 2026 33.00 Lacs

Sonitpur - Assam

Tender For repair/ maint to ceiling fans, exhaust fans, pedestal fans, wall mounting fans, geysers, internal wiring, meter and allied works at af stn tezpur under ge (af) tezpur

Central Government/Public Sector

CTN :45435641

02 Jul, 2026 NA

Udhampur - Jammu And Kashmir

Tender For corrigendum : geafu-36/2026-27 repair/ replacement/ maintenance of ceiling fan/ exhaust fan/ geyser/ pedestal fan/ wall mounted ceiling fan/ sub main wiring / mcbs/dbs/3-phase socket/ industrial socket/ service connection alongwith certin connected works at variou - repair/ replacement/ maintenance of ceiling fan/ exhaust fan/ geyser/ pedestal fan/ wall mounted ceiling fan/ sub main wiring / mcbs/dbs/3-phase socket/ industrial socket/ service connection alongwith certin connected works at various location of 39 wing af stn udhampur

corporations/Associations/Others

CTN :45625891

04 Jul, 2026 NA

Kheda - Gujarat

Tender For annual rate contract for construction work with materials and labour for mahudha nagarpalika area. - box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and depositing on the road side slope as directed upto 50 m., excavation for foundation up to 1.5 meter depth including sorting out and stacking of useful materials and disposing of excavated stuff up to 50 meter lead (a) for loose or soft soil, filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering, filling in foundation and plinth with murrum or selected soil in layers of 20 cm thickness including watering, ramming and consolidating etc. complete., providing and laying cement concrete 1:3:6 (1 cement : 3-coarse sand :6- hand broken stone aggregate 40 mm. nominal size) and curing complete excluding cost of form work in :(a) foundation and plinth, providing and laying compacted w.b.m. 100 mm. thick of grading-i b.t. metal of size 45 mm to 90 mm in two layers including using 22 percentage stone screening 13.2 mm size and percentage stone dust as filler including spreading, watering and consolidation by vibratory roller etc. complete., providing and laying compacted w.b.m. 150 mm. thick of grading-ii b.t. metal of size 45 mm to 63 mm in two layers including using 13 percentage stone screening 13.2 mm size and 7 percentage stone dust as filler including spreading, watering and consolidation by vibratory roller etc. complete., providing laying controlled cement concrete m-200 and curing complete including the cost of form work and excluding cost of reinforcement for reinforced concrete work in : rcc lintels, providing laying controlled cement concrete m-250 and curing complete including the cost of form work and excluding cost of reinforcement for reinforced concrete work in : rcc slabs & landings, providing and casting in situ ordinary cement concrete m-200 forkerbs/kerb blocks including formwork, curing and finishing complete. (upto 10 ton), providing and casting in situ controlled cement concrete m-200 for average 100 mm thick wearing coat laid as directed dincluding tamping, vibrating, finishing, curing and fillingin joints with bitumen complete (upto 10 ton), providing tmt bar fe 500/500d reinforcement for r.c.c. work including bending, binding and placing in position complete upto floor two level (upto 10 ton), white stone bela masonry block in course in foundation, plinth & super structure with stone of approved quality in cement mortar 1:5 (1cement : 5 course sand) including racking the joints etc. complete., white stone bela masonry work in partition walls up to 15 cm thickness in cement mortar 1 : 4 course sand), providing 15 mm thick cement plaster in single coat on fair side brick/concrete walls for interior plastering up to floor two level and finished even and smooth including finishing with a floating coat of neat cement slurry. (ii) cement mortar 1:4 ( 1 cement : 4 sand), providing 10 mm thick cement plaster in single coat on ceiling and soffit of stair for interior plastering up to floor two level and finished even and smooth including finishing with a floating coat of neat cement slurry for plastering on ceiling and soffits of stairs up to floor two level instead of plastering on walls. (ii) cement mortar 1:4 ( 1 cement : 4 sand), 20 mm thick sand faced cement plaster on walls upto height 10 meters above ground level consisting of 12 mm thick backing coat of c.m. 1:3 (1:cement - 3:sand) and 8 mm thick finishing coat of c.m. 1:1 (1:cement - 1:sand) etc. complete, providing and laying white glazed tiles of 6 mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3 (1:cement - 3-coarse sand) finished with flush pointing in white cement., providing and laying white glazed tiles of 6 mm thick in skirting of

State Government

CTN :45595794

08 Jul, 2026 9.94 Lacs

Doda - Jammu And Kashmir

Tender For repair and renovation of hospital at base camp including procurement of lab instruments chanderkote. - demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of engineer-in charge:1:3:6 or richer mix (i/c equivalent design mix), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), providing upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead with cement mortar 1:4 (1 cement : 4 fine sand), providing and laying ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to is: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. in colour such as white, ivory, grey, fume red brown, providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 600x600 mm, providing and fixing ply wood 5 ply with commercial ply on both faces 6 mm thick, dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : upto 10 mm thick, providing and fixing wooden moulded corner beading of size 50x50 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete. second class kail wood., providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :budloo / fir wood., providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws. first class kail wood 30mm, providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 2nd class teak wood beading 62x19 mm, providing and fixing aluminum tower bolts isi marked anodized (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10mm, providing and fixing aluminum handles isi marked anodized (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 liter low level white p.v.c. flushing cistern,

Foundation Plinth Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors