Latest foundation repair Tenders | Government foundation repair Tenders

corporations/Associations/Others

CTN :41031314

24 Jul, 2025 NA

Chennai - Tamil Nadu

Tender For nctps isemii circle ahp dn unit i renewal of damaged foundation bolts motor and pump bed frame in ash handling pumps 1a 2a 2c 3b seal water pump1a 2a 2b 3b and flushing water pump 1 and 2 and including rcc work

Central Government/Public Sector

CTN :40870336

16 Jul, 2025 NA

Bhagalpur - Bihar

Tender For corrigendum : supply of 500 kva ,1500 rpm, 415v 0.80pf -lag dg with radiator and accessories on common base frame , 500 kva dg set - fuel day tank of 990 litres capacity with accessories and stand. , 500 kva dg set-24v dc, 360 ah ,minimum, lead acid type automotive battery with accessories and stand, to be supplied at the time of commissioning. , 500 kva dg set-float cum boost battery charger panel with stand for one dg , 500 kva dg set-necessary fuel piping, supports, accessories for one dg , 500 kva dg set-silencers, exhaust piping and stack, support structures support structure with foundation bolts and accessories, insulation and cladding and hardwares. height as per latest cpcb norms. , 500 kva dg set-acoustic enclosure for one dg with lighting fixtures. , 500 kva dg set-lt power, control, instrument and screened cable including all accessories like lugs, glands, ties etc. for one dg set. , 500 kva dg set-engine b-check kit for one dg, to be supplied at the time of commissioning. , 500 kva dg set-first fill of lube oil, coolant and coolant conditioner at site for one dg, to be supplied at the time of commissioning. , 500 kva dg set-tools and tackles specific to offered dg set. , 500 kva dg set-alternator terminal box with extension busbars , 500 kva dg set-amf panel for 500kva dg set , 500 kva dg set-mandatory spares for 500kva dg set and panels , 500 kva dg set- supervision of erection of one dg set with exhaust piping and structure, fuel piping, control panels and cabling , 500 kva dg set-supervision of testing, pre-commissioning checks, and commissioning and load trial of one dg set with control panels as per operating philosophy. , 750 kva ,1500 rpm, 415v 0.80pf -lag dg with radiator and accessories on common base frame , 750 kva dg set -fuel day tank of 990 liters capacity with accessories and stand. , 750 kva dg set -24v dc, 360 ah, minimum, lead acid type automotive battery with accessories and stand, to be supplied at the time of commissioning. , 750 kva dg set- float cum boost battery charger panel with stand for one dg , 750 kva dg set-necessary fuel piping, supports, accessories for one dg , 750 kva dg set-silencers, exhaust piping and stack, support structures support structure with foundation bolts and accessories, insulation and cladding and hardwares. height as per latest cpcb norms. , 750 kva dg setacoustic enclosure for one dg with lighting fixtures. , 750 kva dg set-lt power, control, instrument and screened cable including all accessories like lugs, glands, ties etc. for one dg set. , 750 kva dg set-engine b-check kit for one dg, to be supplied at the time of commissioning. , 750 kva dg set-first fill of lube oil, coolant and coolant conditioner at site for one dg, to be supplied at the time of commissioning. , 750 kva dg set-tools and tackles specific to offered dg set. , 750 kva dg set-alternator terminal box with extension busbars , 750 kva dg set-amf panel for 750kva dg set , 750 kva dg set-mandatory spares for 750kva dg set and panels , 750 kva dg set- supervision of erection of one dg set with exhaust piping and structure, fuel piping, control panels and cabling. , 750 kva dg set-supervision of testing, pre commissioning checks, and commissioning and load trial of one dg set with control panels as per operating philosophy. , freight

Central Government/Public Sector

CTN :41028769

18 Jul, 2025 14.83 Lacs

Visakhapatnam - Andhra Pradesh

Tender For capital repair repair and overhauling of various finishing area equipment in mmsm-, repair works/replacement of protective doors., repair work of chain beam., repair works/replacement of cross feed conveyor beam, overhauling jobs/re-visioning foundation repair of fixed rollers., turning device bracket replacement., dismantling of tanks,man hole covers, pipe and flanges required manual cleaning of all sludge from the tank, filters changing gasket and seals changing for 5/2 hydraulics, piling table cylinders and racks re-visioning, retractable stopper complete re-visioning., scale pump house suction strainer cleaning, pipe clamps tightening of all the hydraulic systems and replacement wherever necessary upto 22 mm-1000nos,25 mm to 50 mm-1000 nos, above 50 mm-500 nos., complete hose changing for the mobile saw including repair/replacement of power chain, replacement of o rings on finishing hydraulic station size 200-300., clamping unit support rail alignment and strengthening (all mobile saws), all top clamping beam brackets revisioning and pins changing., re-welding of the pipe line joints in piling area approx.500 nos.of various sizes., all saws lift/lower cylinder., re-visioning, brackets repair replacement., revisioning/replacement of traveling wheels of mobile saws., removal of all the fixed rollers of lhs.saw area foundation repair, tools replacement, rollers replacement, fixing and alignment., overhauling of feeder mechanism., vertical conveyor buffer pads changing in piling/bundling section, vertical conveyor idle sprocket bearing replacement., repair of piling collecting grids., revisioning/overhauling of brakes in finishing area., clamping of all the coolers and tank cleaning of tying machines & hydraulic systems, foundation rectification of ccd., fixing of valves in hydraulic racks,, revisioning of fixed stopper., overhauling of hydraulic racks, ccd-1 & 3 shaft changing., piling platform rectification., saw area traversible stopper overhauling., fixing of hearing block stoppers on ccd beam., revisioning of limiting lever assembly., replacement of turning device magnet, rotory unit shaft changing, ccd-5 fulcrum near rotory unit replacement,

Co-operative

CTN :41063163

21 Jul, 2025 1.00 Lacs

Multi City - Uttar Pradesh

Tender For job work of old foundation repair grauting etc for season 2025-26

CTN :40728636

16 Jul, 2025 NA

Darjeeling - West Bengal

Tender For supply of ms shs fabricated steel structure 18 nos containers including staircase and water tank staging minimum weight , 0 point 50 mm trapezoidal ppgi az 150 550 mpa sheet having green camouflage pattern size 3500 mm x 1070 mm weight approx 16 point 70 kgs per sheet , 0 point 50 mm ridge cover of size 250 plus 250mm 500 mm 3000 mm length camouflage pattern , shelter flashing 0 point 50 mm properly rivetted in floor wall ceiling internal external corners including outside joint as per tech specs , 60 mm thick wall and partition panels fixed with the shelters , 60 mm thick false ceiling panels fixed with the shelters , 60 mm floor panels fixed with the shelter , 3 mm thick spc stone plastic composite waterproof flooring fixed on floor panel in all areas except toilet block , aluminium chequered sheet 1 point 5mm thickness fixed on floor panel only in toilet block areas except bathing and toilet area , doors 900 x 2135 mm internal panel made from 60 mm thick puf panels having aluminium lipping all around outer frame to be made with 2 mm thick ms painted profile , toilet doors 700 x 2000 mm internal panel made from 30 mm thick solid pvc panel outer frame to be made with 2 mm thick ms painted profile , aluminium 2 track sliding double glass unit insulated windows 1000 x 1000 mm , window canopy with ppgi sheet and angle iron frame , aluminium top hung ventilator of size 450 mm x 600 mm , aluminium canopy with ppgi sheet and angle iron frame , aluminium fixed verandah glazing with toughened glass 5 mm thick of size 1200 mm x 2400 mm , foundation bolt 40 x 450 mm , m 25 x 100 mm ht nut bolt , stsd screws for roofing rivets for flashing nut bolts for canopy , ms steel lockers of size 2100 mm height x 900 mm width x 475 mm depth double door duly painted in approved shade , office chairs rotating type with puf cushion and rubber hand rest , steel office table of size 1200 mm length x 760 mm width x 900 mm height with 3 drawers 1 cupboard and 18 mm thick prelaminated board as per tech specs , fire extinguisher a b and f type 2 kgs , water dispenser 15 ltr capacity , waste dustbin 10 ltr , 2 kva off grid solar plant with solar pv module 12 volt 335 watts along with all wires junction box connectors gi frame for fixing of panels , 2 kva pure sine wave solar invertor along with cables and fittings as required , solar battery 12 volts 200 ah gel based lithium based along with battery cabinet and cable as required , fd kero heater size 44 point 6 x 44 point 6 x 58 cm heating performance 6 point 3 kw fuel tank capacity 7 point 2 ltrs oil consumption min 0 point 24per max 0point 74 ltr per wt 12 kgs , drapery rods with brackets for curtain , all internal sanitary fitting hot cold water pipelines drainage up to the shelter will be fixed in supplier manufacturing unit external plumbing and sanitary items will be supplied with the shelter , vitreous wash down water closet pan with flushing system cistern combo with p or s trap and flushing pipe complete including all joints complete , stainless steel grade 304 shower floor pan of size 1150 x 1030 mm make jayna bluestar diamond oblique amc or equivalent , vitreous wash hand basin white 550 mm x 400 mm flat back including providing ci brackets cp pillar tap cp angle cock with all accessories as per brief tech specs , wash basin looking mirror 450 mm x 900 mm , ss soap dish , aluminium peg set of 6 , wash basin mixture cp for hot and cold , bib tap long body cp 15mm bore , bib tap short body cp 15mm bore , stop cock cp 15 mm bore , ss jali 4 inch , pvc flushing cistern 10 litres capacity with pvc connections 600 mm long and waste pipe , 20 mm ppr pipes pn 16 for hot and cold water supply in all bathing area and washbasin along with all connections like ppr tee elbow socket reducer etc complete in all respects , 20 mm ppr pipes pn 16 for cold water supply in toilet area and urinals along with all connections like ppr tee elbow socket reducer etc complete in all respects , 25 mm ppr pipes pn 16 for ho

CTN :40926154

16 Jul, 2025 3.54 Lacs

Ranchi - Jharkhand

Tender For breakup of work for removal, repair and fitment of rear suspension both side, replacement of bushes, repair of hydraulic control valve mounting, hydraulic tank mounting and diesel tank foundation, repair of engine and transmission mounting of dumper

CTN :41012047

24 Jul, 2025 24.00 Lacs

Leh - Jammu And Kashmir

Tender For supply of procurement of 30 mtr highmast light out of sre d d - 30mtr motorised system gi highmast light pole top 150mm ibase plate accessories gi foundation motor double drum winch handle trailing cable lighting arrester head frame 6mm wire , automatic control panel timer on off , single red aviation light , 500w led flood light sri , transport charges and hydra charges

Corporations/Associations/Others

CTN :40999686

14 Jul, 2025 NA

Wardha - Maharashtra

Tender For supplying and erecting various items under m.c.area wardha - electrical, design, manufacturing, supply and errection of hot dip galvanised, polygonal stadium masts with fixed head frame suitable for mounting 40 nos. of 500 w led pwd approved make flood light fixtures complete with all accessories as required. the height of the mast from base upto top of head frame shall be 33.0 mtrs. the mast has been designed considering base wind speed @ 44 m/s as per is 875 part-3.mast shall have foundation bolt, 1 nos. li with all accessories and and safety cage ladder for maintance purpose, supply of 500 w pwd approved make led lighting fixtures, making m-25 cement concrete foundation suitable by considering the safe soil bearing capacity at site as 10 t/sqmm at 2.5 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete.(for 33 m high mast as drawing enclosed)., supplying and erecting decorative high brightness led luminaires 1x60 watt high efficiency at reduced wattage. the luminaires comprises of specially contoured high strength and anti corrosion mounting on internally threaded pipe of designation m30, cable entries for through - wiring of main of main supply cable, earth connection safety class-i with ip65 protection, ce conformity mark, prewired with led driver suitable for operation on 240 v, 50 hz, single phase ac supply finished with pure polyster powder coated black: similar to specification of "k-lite make model juno - column light (model no. kp-7034)", supply, of external manrider unit with motorized system for accessing the head frame. the unit shall be suitable for safe load carrying capacity of 300 kg with climb speed not exceeding 9m/min., supplying and erecting architecturally designed and structurally sound arched tubular street lighting decorative pole of height 6000 mm, with single arm architecturally designed bracket having overhang of 1000 mm suitable for various pendent type street lighting luminaries material used for tubes steel of grades yst 210 groove technique using high end mig welding process the pole coated with epoxy zinc phosphate primer and finished using environmentally stable polyurethene base black paint. the pole consist of built in control box with cast aluminum service door and safety rope the control gear tray is prewired with mcb, terminal connectors for loop out arrangement the pole surface mounted with base plate of steel of grade e250 as per is2062:2011, complete with foundation hardware on provided c. c foundation., supplying and erecting outdoor stand mounted feeder pillar for 33 mtr. high-mast of the same manufacturer with 1 no. 250 amp. mccb incomer, 4 nos 63 amp mccb for outgoing, 24hr astronomical time switch with minimum 5 years battery backup, 25 a tp contactor for automatic switching of luminaries, 2 no. 9a contactors and raise/lower push button, ryb phase indication 230 vac, 1 phase digital ammeter 0-600 amp., 1 phase digital voltmeter 0-500 va meter, with cts provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 swg crca sheet box with supporting angles, self lock, gasket and slanting top erected on cc foundation complete

CTN :40974067

26 Jul, 2025 NA

Vadodara - Gujarat

Tender For est of hyd trg lab with integrated facility for hyd system - puf panel sheet, both side 0.40mm ppg sheet, colour white ral 9002, pud density: 04 kgm3, panel joint : overlapped, thickness 50mm with installation, aluminium sliding door (6 ft width x 7 ft height), aluminium section (1.2 mm thick black powder coated section) with 5 mm thick bakelite sheet and 5mm thick black semi-transparent glass (saint gobin), grid ceiling with 2'x2' grid distance, epoxy coating on floor & colour: blue, necessary electric point (wire: r.r cable & switch:, anchor, 1) ac points, ii) fan points (wall mount), iii) 15 amp points, iv) 05 amp points, v) main junction box with mcb, vi) led light points, led lights 2'x2' (syska/crompton/ panasonic) 36w, split acs 1.5 ton (lloyd), 3-star inverter, work table with fabricated of ms pipe with plywood with 3 drawers duly powder coated size:4' x 3', work table with fabricated of ms pipe with top plywood with 5mm rubber sheet 3 drawers powder coated, size:6' x 4', fabrication frame work with ms pole and perlin with black oil paint (10ft height with necessary structure) and r.c.c in foundation., shed over fabrication work of ceiling (0.5mm jindal), colour: white, bty operated crane 5 ton, i) lifting capacity - 5 ton, ii) lifting hight-500mm, iii) lower hight-500 mm, iv) safety features- self braking sys, v) usage indoor, portable & shop floor, vi) total boom length- 1200mm

CTN :40966269

28 Jul, 2025 NA

Multi City - Andhra Pradesh

Tender For supply of root blower spares-quotation-called for t.l. blower , common base frame , motor slide rail , motor , motor pulley , blower pulley , v-belt , v-belt guard , discharge silencer , interconnecting pipe line , suction silencer , suction filter , pressure gauge with isolation valve & syphon , safety valve , (spring loaded type) , non return valve , foundation bolt , anti-vibration pad , gasket , support for discharge , acoustic hood , exhaust fan , anchor bolts with nuts

Foundation Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Co-operative

Corporations/Associations/Others