Latest foundation work Tenders | Government foundation work Tenders

Corporations/Associations/Others

CTN :43186013

14 Sep, 2026 15.00 Lacs

Washim - Maharashtra

Tender For corrigendum : supply of handpump material - supply of handpump material and bleaching powder - hand pump pipe coupling g. i 32mm. connecting rod of hand pump 43 meters coupling of connecting rod of hand pump ermm.m. hand pump head assembly with hand pump cylinder assembly water chamber of hand pump hand pump handle assembly hand pump bearing 6204 (isi mark) hand pump axle nut with bolt hand pump chains hand pump cylinder cap hand pump chain nut bolts (per kg) foundation of hand pump upper valve assembly of hand pump hadapampache upper whale guide cucumber lower valve assembly of the head pump

Central Government/Public Sector

CTN :45576058

06 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply, installation, testing and commissioning of silent d.g. set of 250 kvacapacity complete including civil foundation work with diesel engine, self[1]starter, amf panel and acoustic enclosure etc asper actual site requirement. 250 kva diesel generator set should comply with gsr no. 371 (e) f. no.8-15022/2/2001-cpaenvironment (protection) second amendment rules, 2002 (regarding noise pollution) or latest.the diesel generator sets should conform to cpwd general specifications for electrical works part vii(dg sets) 2013or latest, attached here with and comply with tech spec-ixand other associated work is/ie rules and site requirement &authorized certificate and challan/invoice/test report/warrnty certificate to be submitted with delivery of material. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45597725

26 Jun, 2026 NA

Surat - Gujarat

Tender For supply, fit and commission 15 hp capacity monoblock motor (including pump) no. 2 (killerloskar make) installed for filtration in the plant room at dunbhal swimming pool in south east zone (limbayat) and make new foundation structure (with base plate) and buy back old installed monoblock motor (including pump)

Central Government/Public Sector

CTN :45593503

19 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - 98080106: cond. & u/s. signal items and ms/ci/gi item scrap consisting of point machine, ground connection, , point machine base, lock rod,contactor unit parts, other point machine parts, loco parts, gears, slide cover, cams, ms rotors, beaters, bars, ms rod/angle /channel/pipe cut piece, bm box, pipe fittings, screw couplings, coupling hook, signal three aspects, signal two aspects, cast iron components, pressure tank, augers, dip lorry, ms trolly, tension rod, plate, large pipe,signal post, fastners, pick axe, beaters, crow bars, lever, train coach door broken parts, ms stand, weighing set, traction motor case, compressor case, compressor valve, ms tank, nut, bolt, tool box, ci linked pots, chain, damper, l c gate parts and tap, valve, gear case, flat rod, ms trolley, rottery key, grill, pulley, air filter,cut of angle cock,knuckle pin,wearing plate,cp bottom,ci part, fencing, hood, boiler tube, winch wheel, lc gate parts, steel rope, ladder, battery boxes, frames, ms boxes, ring, ci foundation ct boxes, loco liner, buffer, buffer case, buffer plunger,icf buffer complete set, piston, piston cylinder,weigh machine, connecting rod, signal posts with or without base, bearing case, tension rod, cam shaft,ms cut pieces,pipes, storng part with diabar ms attachment,pure iron flats,pump case, pta parts,shock absorber,e type lock,d bracket,axle box housing,end shield,cast iron component, trolly parts, hyd scissors table,air suspension system, pipe,ladder, pantograph parts, sack barrow,winch for lb gate,l angle,gate boom,rail wheel barrow,nozzle pricker, ms hood tap and such other similar signal,cut pieces of mast, loco and c&w items with or without non ferrous and other attachments as is where is condition. note: (1) if any non- ferrous items found in loose in the location to be handed over to custodian at the time of delivery, (2) crane/jcb loading permitted (3) cutting permitted to loadable size at the time of delivery (4) electronic weighbridge capacity 30 mts only. hence purchaser should bring suitable vehicle so that the loaded weight should not exceed 28 mts at the time of delivery. locotion: w-6& 7 of scrap yard/ssd/ptj.

State Government

CTN :45143459

22 Jun, 2026 1.95 Crore

Korba - Chhattisgarh

Tender For corrigendum : construction of pile foundation for awrs pump house and control room ash dyke jhabu htps, cspgcl, korba west.

Central Government/Public Sector

CTN :45329483

24 Jun, 2026 12.61 Lacs

Nagrota - Himachal Pradesh

Tender For corrigendum : provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate nu

CTN :45408207

18 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For bid to ras bid to ras supply of amn bkr inf 30 mt 2615 - 0.50 mm thick an colour having a tensile strength 550 mpa of size 10 feet x3 feet make uniix jindal mectec or eqv brand , ppgi ridge sheet of 0.80mm thick of 90cm wide of make sail tata jindal incl treating galvanised surface , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos per pkt , hdpe sand bags og colour of size 0.75x0.375x0.15 , door size 3.0x2.10m double leaf ms sheet for door 2mm thick frame as specified , door size 1.80x2.10m double leaf ms sheet for door 2mm thick frame chowkat made of steel equal angle iron 55x55x6mm isi grade , ventilator with grill of size 600x400 mm ventilator loop hole frame for steel angle of size 35x35x5mm isigrade , gate size 3.0 mx 2.0m double leaf frame made of anlgeiron 75x 75x6mm isi grade with shutters made of reinforemnt tmt bar 12 mm dia flat iron for stiles , anti corrosive red oxide zinc chromate primer conforming to is 5-2004 make berger nerolac asian or equivalent , white lime , waterproofing compound make pidilite dr fixit fevicol or equivalent , cement based paint snowcem of make berger nerolac asian or equivalent , cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112-1989 make birla gold ambuja ultratech acc jk dalmia or equivalent , brick sub class b , three phase 1.2 hp monoblock pump 430 volt complete with and incl 3 mtr length required size flexible suction pipe , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw , aluminium strips 25 x 3.0 mm , galvanized iron strip 32 x 6 mm , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings, drilled with 2 nos holes for 6 mm dia near one side , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame. , nut bolt 6mm dia 30 mtr dia with check nut and washer , gi pipe 40mm dia mtr 2.5 mtr make jindal tata kalinga , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make presto polycab finolex , wall vertical non woven geotextile 500gsm as separation layer between wall pvc membrane with provision of pvc disk anchor faster , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane thickness 2 , non woven geotextile 500gsm as protective layer of pvc waterproofing mebbrance with provision of high quality adhesive , floor horizontal non woven geotextile 500gsm as separation layer between foundation and pvc membrane , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc-p water proofing membrane , non woven geotextile 500gsm as protective layer of pvc for pvc membrane , deck slab horizontal non woven geotextile 500gsm as seperation layer between deck slab and pvc membrance , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane thickness 2 , non woven geotextile 500gsm as protective layer of pvc waterproofing mebbrance with provision of high quality adhesive for non woven geotextile 50gsm , high quality adhesive for termination of pvc water proofing membrane at doors ventilators , cement opc 43 grade packed in hdpe bag each 50 kg wt for retaining wall 40.00 mtr x 3.00 mtr height 8 mtr x 3 mtr x 5 nos 40 mtr , coarse sand free from vegetation confirming to is 650 1991 , coarse aggregate 40mm graded confirming to is 383 2016 , stone boulder 9 inch to 12 inch , pvc pipe 75mm dia 3 mtr long //bid details 2 / 47

CTN :45596783

27 Jun, 2026 NA

Jabalpur - Madhya Pradesh

Tender For supply of command post , civil foundation work , lights of boundary wall , center light , installation and commissioning

CTN :45578895

01 Jul, 2026 3.42 Crore

Bilaspur - Chhattisgarh

Tender For construction of pressurized pipe distribution network lift irrigation scheme to supply water for irrigation to deliver at farmers field up to 1 ha with a duty of 0.70 lit/sec/ha and maintained up to 4 ha chak, keeping the discharge of minimum 3 times the duty at one hectare and at least 20 meter residual head at 1 ha for pressurized irrigation by rotation in village kapua, block -patharia ,dist. -mungeli in 160 ha. in kharif (right side of khairi anicut as indicated in index map), out of total gross command area 270 hectare fully covering the entire compact, contiguous possible arable area beyond 500m from submergence line (ftl line) of khairi anicut as indicated in the index map for irrigation system without exceeding total power requirement for solar pumps with solar panel of 100 kwp.it includes all activities starting from survey, investigation, designing, estimating costing, procurement, construction, laying, installing, energizing, etc. of pumping system, rising and gravity mains, main line, branch lines, distribution network, controlling and regulation system , scada work with automation etc. for supply of filtered water for irrigation under pressure. the work also includes construction of chowkidar quarter, pump house, installation of solar power plant and sub station with transformer of required capacity by liasoning with cseb, management, operation and maintenance (mom) and defect liability (dl) for the period of 05 years after completion and mom and dl period run simultaneously and work also including foundation stone laying ceremony and inauguration ceremony and as directed by engineer-in-charge as per details given in scope of work

CTN :45579005

01 Jul, 2026 3.40 Crore

Bilaspur - Chhattisgarh

Tender For construction of pressurized pipe distribution network lift irrigation scheme to supply water for irrigation to deliver at farmers field up to 1 ha with a duty of 0.70 lit/sec/ha and maintained up to 4 ha chak, keeping the discharge of minimum 3 times the duty at one hectare and at least 20 meter residual head at 1 ha for pressurized irrigation by rotation in village bandhapali, baghanpur, bundeli , baragaon and barpali block sarangarh ,dist. sarangarah-bilaigarh in 150 ha. in kharif (madhavpali anicut as indicated in index map), out of total gross command area 270 hectare fully covering the entire compact, contiguous possible arable area beyond 500m from submergence line (ftl line) of madhavpali anicut of dist- sarangarah-bilaigarh as indicated in the index map for irrigation system without exceeding total power requirement for solar pumps with solar panel of 110 kwp.it includes all activities starting from survey, investigation, designing, estimating costing, procurement, construction, laying, installing, energizing, etc. of pumping system, rising and gravity mains, main line, branch lines, distribution network, controlling and regulation system , scada work with automation etc. for supply of filtered water for irrigation under pressure. the work also includes construction of chowkidar quarter, pump house, installation of solar power plant and sub-station with transformer of required capacity by liasoning with cseb, management, operation and maintenance (mom) and defect liability (dl) for the period of 05 years after completion and mom and dl period run simultaneously and work also including foundation stone laying ceremony and inauguration ceremony and as directed by engineer-in-charge as per details given in scope of work.

Foundation Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

State Government

Central Government/Public Sector