Latest frame work Tenders | Government frame work Tenders

Central Government/Public Sector

CTN :45555774

22 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply, termination installation, testing and commissioning of ventilation system on roof of paint shop of lower parel workshop along with complete installation, frame work of suitable size with ms 50mmx 50 mmx 5mm, cabling, cable try work, wiring and protection system with 4 pole 20a mcb for each and mcb board along with 2.5 sqmm cable 4 core and 10 sqmm cable from panel to distribution board for main supply and power full exhaust system of length and height minimum 1 meter with width minimum 400 mm, diameter blades 900 mm, blades rotational speed -620 r/min or more. air flow 30,000 m?/h, noise level shall be less than 70 db, power shall be minimum 750 watt with the flap system and motor starter of 1 hp or as per suitable and confirming to s/iec 60947-4-1 or latest. all electrical works shall be carried out in accordance with the provision of indian electricity act 2003 and indian electricity rules 1956 amended to date and all the safety codes and procedures outlined in the safety codes shall be complied with general and safety requirement shall be governed by is 13947 (pt i) 1993 and is:8623/1993, amended to date. termination of all cables shall be done with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 20a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 2.5. type test certificate from nabl or any other govt agency lab report shall be attached along with the offer without which offer will be rejected. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45529836

22 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For fabrication of arrgt. of central frame work as per drg. no. - 02010822801 rev. 00 assy. of item no. - 0

CTN :45072222

18 Jun, 2026 NA

Goa - Goa

Tender For bid to ras repair, maintenance, and installation of plant systems equipments- frame work: ms / rcc, sheet, repair of control console to arrest ingress of water/ humidity by use of qty 20 rcc blocks of dimension 04 feet x 02 feet x 06 inches (height). 2.2 repair of roof of control console to protect against sun light towards ensuring controlled temperature which is required for electronic equipment held in it. the protective structure would consist of vertical square tubes of dimension 40 x 40 mm and length 128 feet clamped onto the side wall body of the container. a horizontal framework 25 x 25 mm of similar raw material (square tube of dimensions 40 x 40 mm, 178 feet length) shall be fixed onto these vertical rods. 2.3 repair of fuel tank. 2.4 repair of qty 02 mtb side platforms used for inspection and adjustment during ground run/ testing of engine. 2.5 provisioning of consumables for maintenance of dg set of the console.

CTN :45575070

25 Jun, 2026 4.84 Lacs

Calcutta - West Bengal

Tender For necessary construction of roof shed with new iron structure along with colour coated steel sheet and side covering around the shed by iron frame work with g.i. sheet etc. work for mess with kitchen on the roof top of madhabpur police station, kolkata

CTN :45561860

29 Jun, 2026 60.15 Lacs

Ernakulam - Kerala

Tender For supply and installation of furniture - guest house, wardrobe: manufacturing and supplying wardrobe of size : 120w x50 d x225 h cm storage side and shelves are made up of 17mm a grade treated rubber wood fixed by 1 2 a j stainless steel hinges and handles necessary good quality hardware rate inclusive cost of material transportation loading and unloading changes labour charges etc.. smoothly finished with polyurethane materials, tv unit: manufacturing and supplying tv unit of size 140 x 120cm panel made of 17mm chemically treated rubber wood good quality fiuing accessories provision for switch board etc.. smoothly finish with polyurethane materials, cot: manufacturing and supplying cot of size: 152 w x 198 l x 35 h cm frame and all slats made by good quality teak wood bed with 9mm marine plywood smoothly finish by polishing two coats of polyurethane sealer and one coat of polyurethane top layer, side table: manufacturing and supplying side table of size: 60 x50 x 45 cm frame and slats made by good quality teak wood smoothly finish polyurethane sealer and polish materials, dressing table: manufacturing and supplying dressing table of size: 75 xl60 x60 cm and mirror unit of size: i 10 x 75 cm frame and slats made by good quality teak wood smoothly finish by polishing two coat of polyurethane sealer and one coat of polyurethane top layer, table: manufacturing and supplying table of size: 100 x60 x75 cm frame and slats made by good quality teak wood smoothly finish by polishing two coats of polyurethane sealer one coat of polyurethane top layer, ceiling: providing and fixing of frame work made of special sections and l22mm marine plywood and veneer provide necessary led panel light, head board: manufacturing and supplying head board for cot of size 245 x 120 cm frame made by 17mm a grade treated rubber wood smoothly finish by polishing two coats of polyurethane sealer and one coat of polyurethane top layer, wall cladding: providing and fixing wall cladding with 12 mm marine plywood and mica, wooden arm chair: manufacturing and supplying teak wood arm chair smoothly finish by polishing two coats polyurethane sealer and one coat polyurethane top layer, wooden teapoy: manufacturing and supplying teapoy of size : 70 x 45 x 50 cm frame and slats made by good quality teak wood smoothly finish with polishing, working chair: manufacturing and supplying teak wood working chair smoothly finished with polishing, suite room sofa: 3+ i manufacturing and supplying sofa 3 + 1 seater made by high density pu foam with teak wood frame smoothly finish with polishing, dining table: manufacturing and supplying dining table of size: 180 x 90 x75cm frame and slats made by good quality teak wood smoothing finish by polishing, dining chair: manufacturing and supplying teak wood dining chair smoothly finished with polishing, buffet table: manufacturing and supplying buffet table of size : 360x60x90 cm made by 16 mm bwp 710 grade marine plywood and mica top with good quality granite provide necessary shelves, living hall table :manufacturing supptying living hall table of size :270 x and 60 x 75 cm frame and slats made by good quality teak wood smoothly finish with polishing, sofa: manufacturing and supplying sofa made by high density pu foam and teak wood frame smoothly finish with polishing-3 seater, sofa: manufacturing and supplying sofa made by high density pu foam and teak wood frame smoothly finish with polishing-1 seater, gypsum ceiling: providing and fixing gypsum ceiling with gl section and gypsum panel board putty work and emulsion paint finish provide necessary led panel light, reception counter paneling: providing and fixing paneling with 12 mm marine plywood and colour mica, reception table: manufacturing supplying reception table of size:265 x and 100x 100 cm made by 16 mm bwp 710 grade marine plywood provide four drawer, side table: providing and fixing side table of size: l00x 40x75 cm made by 16 mm bwp 710 grade marine plywood, planter box 1

CTN :45531305

20 Jun, 2026 88.48 Lacs

Delhi - Delhi

Tender For making arrangement for idc at red fort delhi on 15.08.2026 (sh: erection of frame work (on hire basis) for placing view cutter at madhav das, 15 august park adjoining netaji subhash marg at red fort).

CTN :45544260

23 Jun, 2026 NA

Leh - Jammu And Kashmir

Tender For tender for supply of items for upgradation offices - modular work station table with key board drawer including labour charge , iron frame work incl labour charge , wall paneling including wooden framing hardware and labour charge , wooden flouring including wooden framing hardware and labour charge , ply wood hdmr 19mm 8ft x 4 ft

Central Government/Public Sector

CTN :45546329

14 Jul, 2026 NA

Ahmedabad - Gujarat

Tender For supply of description of work station -l shape size : 72 inch x 72 inch x 60 inch, top material : table top made of25mm thick pre laminated particle board covered with pvc hot pressed lipping of profile, soft board one side & white board one side. modular partition : 60mm thick partition frame work made out of 1.2mm aluminium with 50 microns powder coating, designed to carry out electrical power & computer wiring in 2 different race ways, electric switch socket board 2x6 amp(2 nos), particle board grade ii & type-ii (is12823: 1990; reaffirmed 2005) finished with 0.8 mm thick laminate,02 padastal unit with 03 drawer &locking arrangement [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45556342

24 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of one coach set of details of frame work for train set dtc coaches to drg.no 88914008, alt 'a', col.i - 1 no 88914013, alt 'a', col.i - 1 no 88914020, alt 'c', col.i - 1 no 88914021, alt 'c', col.i - 1 no all the members as per the above drgs. shall be supplied as loose. carline assembly to drg.nos. 72614068, alt 'c', col.i - 1 no 72614069, alt 'c', col.i - 1 no 88914025, alt 'a', col.i - 1 no 88914026, alt 'b', col.i - 1 no welding parts to drg. nos. 88914016, alt "c", col.i - 1 no 88914027, alt "g", col.i - 1 no 88914028, alt "j", col.i - 1 no 88914029, alt "c", col.i - 1 no. all the above items shall be supplied as coach set. special condition : 1. the chair pillars shall be packed in the container as per icf/j&t/sk-1865-alt 'a'. 2. other partition frames not fitting in the container shall be stacked one over the other, secured using packing strip and placed in steel pallet. 3. the height of each stack shall not exceed 750mm for easy handling. 4. suitable and sufficient packing strips to be used such that stacked items do not disintegrate during transit, storage and handling. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45521131

26 Jun, 2026 4.15 Lacs

Gorakhpur - Uttar Pradesh

Tender For supply of supply of blue star water cooler storage capacity 150 ltr cooling capacity 150 ltr complete in all respects , supply of v guard stabilizer 5 kva automatic copper winding input range 90 240 volt , supply and installation of sintex or equivalent hdpe seamless water tank , colour painting of complete structure , supply and fixing of stainless steel waste water collection tray , plumbing and fittings including pipes elbows tees crosses and other accessories as required , water supply pipeline approx 3 metres , comprehensive maintenance charges for one year , electrical wiring point for water cooler including main switches and required materials , safety locking arrangement , providing and fixing retro reflective sheet on front left and right sides , transportation charges , fabrication installation and framing of steel structure including loading unloading , loading and unloading charges of ms structure water cooler and other materials , labour charges for fitting and grouting of safety cover , earthing work complete with all materials and labour as per pwd specifications

Frame Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government