Latest framing arrangement Tenders | Government framing arrangement Tenders

CTN :39911042

28 Apr, 2025 NA

Jaipur - Rajasthan

Tender For bid to ras supply of propeller type ac ventilating fans - exhaust fans (v2) as per is 2312 (q2) , electric ceiling fan with bldc motor (v3) isi marked to is 374 (q2) , led street light 120 w having microwave motion sensor the fixture would have an efficacy of 135 lpw as system efficacy and 175 lpw as chip efficacy ip 66 , led light 72 w post top victorian look suspended mounting arrangement to be mounted on poledo fuse element 11kv 5 amp , led bollard ufo shape 2 feet height 10 w , supply only 5 star 1 point 5 ton hi wall split units indoor outdoor complete with cordless remote control unit and with cooling and heating function of capacity complet connected accessories , supply only electric water heater storage type steel body with copper inner tank and heating element up 2 kv capacity 25 litre bee 5 star , supply only water cooler fully stainless steel electric driven single phase having approx storage and nominal cooling capacity of 40 divide 80 ltrs per day complete , smart led street light endprlplussl 120 watt led 730 pasytopic micr sensor base operation detection range 10 metre light , led street light endprlplussl 120 watt led 730 pasytopic micr sensor base , supply only 12 volt 65 ah sealed maintenance free battery for 30 kva online ups installed at hq swc bldg , wall mounting fancy lightfitting 9 watt complete , lt 1 point 1 kv cable and termination joint 3 point 5 core 25 to 50 sqmm , lt 1 point 1 kv cable and termination joint 3 point 5 core 70 to 120 sqmm , lt 1 point kv cable and termination joint 3 point 5 core 185 sqmm , exhaust fan iron body of size 300 mmvolt single phase , xlpe cable joint ht of size 150 sqmm 3 core straight through joint for 11 kv , xlpe cable joint ht of size 185 sqmm 3 core outdoor end termination type , shaivi pipe supporting clamping system s4 channel 10 feet 1 nos profile bracket 3 to 2 nos ubolt rm 4mm to 1 nos zinc coated nails , shaivi pipe supporting clamping system s4 channel 10 feet 1 nos profile bracket 3 to 1 nos ubolt rm 75mm 1 nos zinc coated nails , shaivi pipe supporting clamping system s4 channel 18 feet 1 nos profile bracket 3 to 2 nos ubolt rm 20mm 4 nos zinc coated nalis 4 nos , heating element 1 point 5 kw large tringle cup type , led spot light 9 watt complet set , heating element 1 point 5 kw round cup type , glass pane pin headed 4mm thick 4 x 3 sheet , glass pane plane 4 mm thick 4 x 3 sheet , galavnised mild wire mess 0 point 90x 15 mtr tube , forged valve 15mm bore half turn , looking mirror 18x 15 mm with plastic frame , lighting arrestors for 33 kv heavy duty set of 3 pc , glavanise wiremesh 5mm dia wire average width 1 point 14 mm wire mesh width 1 point 12 mtr and 50 feet long , straight through joint for xlpe cable 11 kv of 95 sqmm , lt straight through joint 70 to 95 sq mm , indoor end joint 70 to 95 sqmm , straight through joint for xlpe cable 11 kv of 120 sqmm

CTN :40098875

14 May, 2025 NA

Sonitpur - Assam

Tender For supply of constr of at tr - cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112 1989 make birla gold or ambuja or ultratech or jk or dalmia or acc , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , hard core 63 to 90 mm , 80 mm thick coloured interlocking precast paverblock any shape and size confirming to is 15658 2006 and grade m 40 of size 250mm by 125mm by 80mm , road side marker hi res ms stock 10 ft long 50mm dia with white paint red paint top , nylon rope 1 inch make samon or sajun or new england , portable collapsible protective wall baskets galvanized welded mesh frame 2 cell per set 1 point 232 by 0 point 616 by 0 point 759 mtr with non woven geotextile 3mm thick 300 gsm as per ts

CTN :39774606

26 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For bid to ras corrigendum : supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold, ambuja,ultratech,acc,jk,dalmiya under job no 2633 ug comd bkr as per store list attached , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 63-90 mm graded , stone for rr masonary less than 6 inch , mild steel bars of size 8mm dia conforming to is 432 part i 1982 maketata,sail,jsw , mild steel bars of size 10 mm and above dia conforming to is 432 part i 1982 make-tata,sail,jsw , mild steel bars of size 12 mm and above dia conforming to is 432 part i 1982 make-tata,sail,jsw , mild steel bars of size 16 mm and above dia conforming to is 432 part i 1982 make-tata,sail,jsw , ms binding wire , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various sizes , wooden log for props of size 3.2 mtr long 100mm dia. , app based polymeric membrane minimum weighing 3kg oblique sqm and minimum 3mm thick reinforced with polyster non wove fabric as per store list attached , priming surfaces and applying bitumen as a primer in base of app membrane , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms rhs of size 80x40x3.2 , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms rhs of size 50x25x2.9 , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed maketata,sail,jsw for ms rhs of size 96x48x3.2 , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms plate of size 8mm thick , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms plate of size 10mm thick , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms plate of size 12mm thick , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed maketata,sail,jsw for ms angle of size 40x40x6 for cleat , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete all as directed. , ms flat iron 40x5mm thick for wind tie maketata,sail,jsw , iron welding rod confirming to is 814-2002 isi marked 3.15mm thick 100 nos pkt , water proofing compoundconfirming to is 2645-2003 make-pidilite,dr fixit, fevicol , quick setting compound makepidilite,fevicol,quick fix , cement based paint snowcem make-berger,asian,nerolac , oil bound distemper washable quality of proprietary brand of makenerolac,berger,asian , birla white wall care putty water resistant white cement make-nerolac,berger,asian , ppgi roofing sheet 10 feet x 3 feet long and thickness 0.63 mm with grard film the ppgi sheet shall have minium coating of 4-5 micron epoxy primer and as per store list att , pre painted galvatume aluminium zinc coating gi based plain steel sheet 0.50 mm thick an colour having a tensile strength 550 mpa make-uniix,jindal mectec or eqv brand , synthetic paint enamelled og colour confirming to is 5- 2004 make-berger,asian,nerolac , painting brush 4 inch isi marked , nails various size , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos oblique pkt , anodised aluminium door 1000 mm x2100 double shutter with frame including all fittings and as directed make-jindal,hindalco aluminium section weighing 0.55 kg oblique mtr. , anodised aluminium window triple track 2 track glass and 1 track wire mesh with frame of size 1000mm x 1000mm including all as per store list attached , anodised aluminium ventilator 1200x600 mm fixed type with glass 4mm thick thick including all fittings and as directed as per store list attached , ms anchor bolt, suitable for rcc work, 12mm dia, 300mm long with 2 washer and a nut minimum wt of each bolt and nut

CTN :39881476

29 Apr, 2025 NA

Thane - Maharashtra

Tender For corrigendum : supply of high end desktop computer (q2) , office suite software (v2) (q2) , study or laptop table (q3) , vpn network security equipment (q2) , mosquito mesh window frame (q3) , cat 6 cable for indoor use (q2)

Central Government/Public Sector

CTN :40094498

26 May, 2025 NA

Multi City - Multi State

Tender For supply of louver frame arrangement for nmghs coach as per drg. no. rdso/cg/drg/20008, alt. 1 or latest(material of wire mesh is stainless steel). [ warranty period: 30 months after the date of delivery ]

CTN :40094750

29 Apr, 2025 NA

Gonda - Uttar Pradesh

Tender For supply and fitment of industrial ro plant capacity 500 lph with 1000 l chiller tank with wate r level auto cut-in cut-out at loco shed gonda. the entire plant to be enclosed in iron frame and mesh on a raised platform. water outlet from chiller will be provided to 3 taps (minimum 3 feet distance from plant) o utside plant iron enclosure along with basin. ail electrical and plumbing work incuded. [ warranty period: 30 months after the date of delivery ]

CTN :39038232

01 May, 2025 13.18 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin mechanic motor vehicle (mmv) tradeat iti tarsali, gujarat, india (package 3: mmv trade) - alternator assembly used for lmv working condition demonstration kit , starter motor assembly used for lmv working condition demonstration kit , electronic engine control module , fuel pump for mpfi working condition demonstration kit , inline fuel injection pump and rotor type fuel injection pump , demonstration board of 2wheeler ignition system. , demonstration board of electronic ignition system. , working condition of petrol mpfi engine assembly with fault simulation board , mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling , demonstration board of mpfi system , ultrasonic injection cleaning equipment , working model of power windows , petrol engine motorcycle/scooter along with special tools and accessories , four stroke multi cylinder diesel engine in working condition , four stroke four cylinder crdi diesel engine in working condition , functional/experiment model of different type of sensors. , auto electrical test bench , cut section model of mock layout of a motor car -electrical system - working model , cut section working model of single plate clutch assembly. , cut section working model of diaphragm clutch assembly. , cut section working model of centrifugal clutch assembly. , front axle ( rezeppa joint) with stand for dismantling and assembly , rear axle with stand for dismantling and assembly , cut section model of synchronous gear box working , cut section model of sliding mesh gearbox working , cut section model of constant mesh gearbox working , full floating axle and semi- floating axle assembly , cut section working model of automatic transmission gear box , steering assembly - , 1. rack& pinion, , 2. worm& roller , 3. recirculating ball , 4. power steering , wheel alignment set up instrument-computerized , brake testing equipment (to test efficiency of vehicle where motion after braking is plotted) , motor vehicle in running condition (diesel heavy) with hydraulic power steering , light motor vehicle diesel crdi with electronic power steering and car a/c , engine dynamometer , four stroke multi cylinder engine mpfi petrol with cng kit set up in running condition , four cylinder four stroke diesel engine test rig with rope brake dynamometer , exhaust gas analyzer - diesel , training setup for adas systems , 4-wheel alignment set & hoist with advanced driver assistance systems (adas) complete frame targets , steel toolbox with lock and key (folding type) , punch letter , outside micrometer (0 25) , outside micrometer (25 50) , outside micrometer (50-75) , outside micrometer (75-100) , inside micrometer (25-50) , depth micrometer (0-25) , thread micrometer , adjustable micrometer sprit level to measure flatness, indication and taper with prismatic measuring base , vernier caliper , digital vernier caliper , vernier depth gauge , vernier bevel protractor, least count 5minutes , telescope gauge , dial test indicator plunger type (complete with clamping devices and stand) , universal surface gauge , cylinder bore gauge , compression testing gauge suitable for petrol engine. , vacuum gauge , granite surface plate , work bench , spanners socket with speed handle, t-bar, ratchet and universal , magneto spanner set , cylinder ridge cutter , vice grip pliers , torque wrenches , pneumatic tools set , car jet washer , pipe flaring tool , pipe cutting tool , universal puller for removing pulleys, bearings , stud extractor set of 3 , stud remover with socket handle , paraffin pressure gun , hand reamers adjustable , straight edge gauge , straight edge gauge , ladle , electric soldering iron , wire gauge (metric) , digital multi meter, 3 % digit (min), diode test mode and continuity mode, , growler , hydrometer , battery analyzer with printer , carburetor - solex, mikuni for dismantling a

State Government

CTN :40052796

26 Apr, 2025 80.00 Lacs

Rajsamand - Rajasthan

Tender For 01rate for supply of construction material under village panchayat kunwaria-, , ghadla/kankar/jhajhra , , mortar and mud , , lime from kali bhatta for lime masonry work , , cement , , ppc , , white cement , , fine aggregate , , sand/gravel , , gravel local , , rakhi (fly ash) , , surkhi , , stone dust (in masonry work) , , ballast stone/brick (for other than road work) , , 40mm measuring stone (hand broken grit) (cut voids 1/11) , , 40mm grit stone (broken by crusher) (cut voids 1/11) , , 20mm grit stone (broken by crusher) , , 12/10/6mm grit stone (broken by crusher) , , brick mortar , , material for road work (including 5 km lead) , 63-40 mm crushed stone aggregate (voids carte 1/11) , , 63-40mm hand broken stone aggregate (voids cart 1/11 , , 90-45 mm. hand broken stone aggregate (voids cart 1/11 , , quarry rubbish (cut voids 1/6) , , gravel (cut voids 1/6) , , conker (cut voids 1/6) , , binding material (pi4-6) (cut voids 1/6) , , brick (22.5 x 11 x 7.50 cm) , , first class , , ?second class (ii class) , , soling / kharanja / masonry stone , , chinrai beradda (rr) , , masonry course (cr) , , kharanja soling (for flooring work upto 15cm height) , , kharanja soling (23cm height for road/kharanja work) , , jodhpuri type stone strips / arches / planks (length 2-3', width 10-12", thickness 2.5-3.5") , , flaky material (3-4" thick & length and width 1-2") , , sandstone (dpc, sill, coping, lintel, tand, almirha etc) , , up to 25mm thickness , , up to 25-40mm thickness , , upto 40-50mm thickness , , up to 50-75mm thickness , , upto 75-100mm thickness , , upto 100-150mm thickness , , floor / strip paving stone , , floor planks upto 35mm thick, min. 3 sqft or more area , , katla for strip paving 60-75mm thickness, min. 3 sqft or more area , , unpolished rough kota stone , , upto 900 sq.cm , , 901 to 2300 sq. cm , , more than 2300 sq.cm , , polished kota stone (one side polished) , , upto 900 sq.cm , , 901 to 2300 sq. cm , , more than 2300 sq.cm , , marble stone (makrana adanga 20mm thick) , , upto 900 sq.cm , , 901 to 2300 sq. cm , , more than 2300 sq.cm , , marble chips , , marble powder , , marble stone (rajnagar || quality/local 20mm thick) , , upto 900 sq.cm , , 901 to 2300 sq. cm. , , more than 2300 sq.cm , , stone frame , , single patam size 100 x 75mm. , , double patam size 125 x 75 mm. , , stone slabs , , up to 1.5 m length, minimum 40mm thick , , 1.5 m to 2.40 m length, minimum 50mm thick , , 2.4 m to 3.0 m length, minimum 65mm thick , , above 3.0 m length, minimum 75mm thick , , precast tiles/blocks , , glazed size-30x45 cm , , mosaic size-40mm thick , , vitrified size-60x60 cm , , interlock tiles/brick/block for road work , , cement interlocking block m-30grade, 60mm thick , , cement interlocking block m-30grade, 80mm thick , , cement interlocking block m-30grade, 100mm thick , , fr pvc insulated copper conductor single core cable isi marked , , 1.50 sq mm. , , 2.50 sq mm. , , 0.50 sq mm. , , 1.00 sq mm. , , 4.00 sq. mm. , , 6.00 sq. mm. , , local wood with fittings (for doors, windows and furniture) , , mango , , acacia , , other , , factory made doors (30mm thick, solid core single leaf) , , structural steel , , iron (tor steel fe 415/500 for reinforcement) , , winding wire 18 gauge , , iron guard , , conical iron/square bar/leaf/angle iron , , barbed iron wire(size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage , , forged , , iron mesh (24 gauge, 14 mesh) , , cement concrete lattice sky underworld 40mm thick , , glass , , 3 mm thick glass , , color paint , , inamil paint , , distemper (water bound) , , for lime whitewashing(aras/kali) , , primer (for iron / wood) , , petroleum products , , , diesel hsd , , mobil oil , , bitumen shalitax board (25 mm thick) , , plain sheet , , gi sheet 22 gauge (0.80 mm) , , gi sheet 24 gauge (0.63 mm) , , m.s. sheet 22 gauge (0.80 mm) , , m.s. sheet 24 gauge (0.63 mm) , , corrugated sheet , , gi sheet 1mm thick , , gi sheet 22 gauge (0.80 m.m.) , , asves

State Government

CTN :40053822

28 Apr, 2025 1.00 Crore

Jalore - Rajasthan

Tender For rate contract for goods and equipment supply work for fy 2025-26-, 1, , paila/kankar/jhajhra, , 2, , mud masala, , 3, , lime from kali bhatta for lime masonry work, , 4, , cement, , 4.1, , ppc, , 4.2, , white cement, , 5, , fine aggregate, , 5.1, , sand/gravel, , 5.2, , gravel - local, , 5.3, , rakhi (fly ash), , 5.4, , surkhi, , 5.5, , stone dust (in masonry work), , 6 ballast stone/brick (for other than road work), , 6.1, , 40mm measuring stone (hand broken grit) (cut voids 1/11), , 6.2, , 6.3, , 6.4, , 6.5, , 7, , 40mm grit stone (broken by crusher) (cut voids 1/11), , 20mm grit stone (broken by crusher), , 12/10/6mm grit stone (broken by crusher), , brick mortar, , material for road work (including 5 km lead), , 7.1, , 63-40 mm crusher broken stone aggregate (cut voids 1/11, , 7.2, , 63-40mm hand broken stone aggregate (cut voids 1/11), , 7.3, , 90-45mm. hand broken stone aggregate (cut voids 1/11), , 7.4, , quarry rubbish (cut voids 1/6), , 7.5, , gravel (voice kart 1/6), , 7.6, , kankar (cut wads 1/6), , 7.7, , binding material (pi 4-6) (cut voids 1/6), , 8, , bricks (22.5 x 11 x 7.50 cm), , 8.1, , first class, , the ii class, , soling / kharanja / masonry stone, , chinnai berdha (rr), , masonry course (cr), , kharanja soling (for flooring work upto 15cm height), , kharanja soling (23cm height for road/kharanja work), , jodhpuri type stone strips / arches / planks (length 2-3', width 10-12", thickness 2.5-3.5"), , flaky material (3-4" thick & length and width 1-2"), , sandstone (dpc, sill, coping, lintel, tand, almirha etc), , up to 25mm thickness, , up to 25-40mm thickness, , upto 40-50mm thickness, , up to 50-75mm thickness, , upto 75-100mm thickness, , upto 100-150mm) thickness, , floor / strip paving stone, , floor planks upto 35mm thick, min. 3 sqft or more area, , katla for strip paving 60-75mm thickness, min. 3 sqft or more area, , unpolished rough kota stone, , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , polished kota stone (one side polished), , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , marble stone (makrana adanga 20mm thick), , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , marble chips, , marble powder, , narbal stone (rajnagar ii quality/ local 20mm thick), , upto 200 sq.cm, , 01 to 2300 sq.cm, , more than 300 sq. cm, , stone frame, , kal paitham size 100 x 75 mm., , force plate size 125 x 75 mm., , stone slabs, , p to 1.5 m length, minimum 40mm thick, , 5 m to 2.40 m length, minimum 50mm thick, , 4 m to 3.0 m length, minimum 65mm thick, , above 3.0 m length, minimum 75mm thick, , precast tiles/blocks, , glazed size-30x45 cm, , mosaic size-40mm thick, , vitrified size-60x60 cm, , interlock tiles/brick/block for road work, , - cement interlocking block m-30grade, 60mm thick, , cement interlocking block m-30grade, 80mm thick, , cement interlocking block m-30grade, 100mm thick, , fr pvc insulated copper conductor single core cable isi marked, , 1.50 sq mm., , 2.50 sq mm., , 0.50 sq mm., , 1.00 sq mm., , 4.00 sq. mm., , 6.00 sq. mm., , local wood with fittings (for doors, windows and furniture), , mango, , acacia, , other, , factory made doors (30mm thick, solid core single leaf), , structural steel, , iron (tor steel fe 415/500 for reinforcement), , winding wire 18 gauge, , iron guard, , conical iron/square bar/patti/angle iron, , barbed iron wire (size 12 guage wire and 12 guage strad/12 guage wire and, , 14 guage strad/14 guage, , forged, , iron mesh (24 gauge, 14 mesh), , cement concrete lattice sky underworld 40mm thick, , lass, , mm thick glass, , c-paint, , namil paint, , distemper (water bound), , lime - for whitewashing (aras / bud), , primer (for iron / wood), , petroleum products, , diesel hsd, , mobil oil, , bitumen shalitax board (25 mm thick), , plain sheet, , gi sheet 22 gauge (0.80 mm), , gi sheet 24 gauge (0.63 mm), , m.s. sheet 22 gauge (0.80 mm), , and, , format, , gram panchayat, thalwa, , , m.s. sheet 24 gauge (0.63 mm), , corrug

CTN :40056035

28 Apr, 2025 50.00 Lacs

Sujangarh - Rajasthan

Tender For supply of materials for construction in gram panchayat bagsara athuna (for mgnrega verius ,plans on bsr 2025-26. f.y. 2025-26-, diesel road roar 8 to 10 tonne, , sheep foot roller, , truck 9 tonne, , tractor (25.40 hp), , tractor trolley, , tractor water tanker capacity 4000 litres water, , cement concrete mixer 57 pan foot, , pumping set 15 h.p., , niddle/plate vibrator with operator, , camel cart/bullock cart with driver, , grinding machine with operator (large motor driven), , compressor, , hydraulic excavater/jcb (bucket capacity 0.4cum), , dumper, , scraper, , shuttering of wooden planks with poles and other materials to be installed on tpsite and removed after the stipulated period, , shuttering of ply with poles and other materials to be installed on tpsite and removed after the stipulated period, , shuttering of iron plate with poles and other materials installed on tps site and removed after a specified period, , water and pumping material (filling), , grinding machine (small operator, hand operated), , padla/kankar/jhajra, , mortar-soil/mud-masala, , lime from brick kiln for roasted masonry work, cement, ppc, white cement, fine aggregate, sand/bajri, gravel local, fly ash, surkhi, stone dust in masonry work, gitti of stone/brick (for other than road work), 40mm measured stone (hand broken grit) (boids cut 1/11), 40mm grit of stone (broken by crusher) (boids cut 1/11), 20mm chit of stone (broken by crusher), 12/10/6mm chit of stone (broken by crusher), brick clay, material for machining work (5 km, including lead), 6340mm stone crushed stone (boids cut 1/11), 63.40mm stone crushed stone (boids cut 1/11) cut 1/11), 9045 mm, hand broken stone aggregate (boids cut 1/11), quarry ravinsh. boids cut 1/6), graven (voids cut 1/6), puncture (boids cut 1/6), (22.5 x 11 x 7.50 cm), pacham peni (1st class), dinesh cheni (ii class), bhonima masonry stone, vinai nerada (rr), nimai gada (cr), baja gaalim upto 15cm height for purge work), paraja monim (23cm height for gadak/gharanja work), jodhpuri rai stone strip dhap shovel pieces (mumbai 2-3. thickness 10-12", thickness 2.5-3.5"), flaky material (3-4" thick & length and width 1-, 2), minister (dpc, sill, coping, lintel, tand, almirha etc), upto 25mm thickness, upto 21-40mm thickness, upto 40-50mm thickness, upto 50-75mm thickness, upto 75-100mm thickness, upto 100-150mm thickness, parn / patti patan katja stone, ? , 001 to 2300 cm, , more than 200 sq. cm, marble powder, marble stone (gajnagar ii quality/local 20mm thick., 000 sq. cm, 901 to 2300 burn cm and, more than 2300 perm, stone frame, single patam size 100 x 75 mm,, either patam size 125 x 75 mm., stone strips, up to 1.5 m length, minimum 40mm thick, 1.5 m to 2.40 m length, minimum 50mm thick, 2.4m to 3.0 m length, minimum 65mm thick, above 3.0 m length, minimum 75mm thick, precast tiles/blocks, glazed size-30x45 cm, mosaic size 40mm thick, vitrified size-60x60 cm, interlock tiles/brick/block for road work, cement interlocking block m-30grade, 60mm thick, cement interlocking block m-30grade, 80mm thick, cement interlocking block m-30grade, 100mm thick, fr pvg insulated copper conductor single core cable 151 marked, 1.50 sq.mm, -, , 4.00 sq.mm, 6.00 sq.mm, 0.50 sq.mm, 1.00 sq.mm, local wood with fittings (for doors, doors and fences.) fire, acacia, others, factory made doors (30mm thick solid core single pane., structural steel, +, iron (door steel fe 415/500 for reinforcement), winding wire 18 gauge, iron girders, conia iron pokor bar/patti/angle iron, barbed iron wire (size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage, mesh, iron mesh (24 gauge, mesh), cement concrete mesh akash patal 40mm thick, 3mm thick glass, paint, enamel paint, distorter (water bound), lime for painting (aras/kali), primer (for iron/wood), petroleum products, diesel hsd, mobil oil, , hand wash-basin 450*300mm with cupintv p.v. m. vent pipe, stone bar (5.w.) pipe 100 m.m. diameter, 0.6 m. long, m. p. pillar cock (dia

Framing Arrangement Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government