Latest friction shoe Tenders | Government friction shoe Tenders

CTN :40066063

08 May, 2025 NA

Dehradune - Uttarakhand

Tender For supply of essential spares for hhv bc 600 and hhv bc 300 coating plants - set of heaters for od 150 pump , inv. magnetron gauge head model png 3 , lt transformer 230v ac with thermal snap switch , ht rectifier assembly , multihearth electron beam gun , eb_3 motorized turret drive kit , needle valve model nv_1 drg no 0241_001_000 , liquifit make polyethylene tubing 6 mm od , liquifit make polyethylene tubing 8 mm od , sealing kit for fd_60 pump, set of oil seals, o_rings , vane kit for fd_60 pump, part no 01fd_060_403 , fd 60 spring and spring pins set part no 01fd_060_409 , fd 60 cartridge kit, set of poppet, flaps, springs and float valve , rd 250 sealing kit, set of o rings, ptfe lip seals and viton oil seals , rd 250 by 500 bearing kit part no 01rd_025_412 , rittal fan and filter unit, 55 ma3 by h , 12rk25 rotary feed through assembly , set of o rings and gasket for fd 20 pump , set of springs and pins for fd 20 pump , dp cooling unit

Central Government/Public Sector

CTN :39846339

05 May, 2025 NA

Nashik - Maharashtra

Tender For corrigendum : supply of osaero job work for manufacturing of 40 parts as a package ref semfg596 - side bracket-lh(star15 to #16) , lh-tee member (sta #3 sta #4) , side bracket-rh(sta#15 to #16) , lh-cutout edge member bot (aft) , rh-cutout edge member , bracket (top floor star13 to star19 , r.h. channel middle floorassy)(stas , jack bracket sta#3 (x=2550 , rh-side frame topista#18 x-5475) , side frame bottom-lh(sta#20)(x=6150 , side frame bottom-rh (sta#20)(x=615 , wedge rear (blow in door) , wedge rear (blow in door) , bracket-lh (x-5910) , bracket-lh (x-5910) , bracket (spring jack instln.) , hinge bracket-lh star16 (nose u/c , hinge bracket-rh sta#16 (nose u/c , bracket (sta#1) , lh-skin edge member , rh-skin edge member , tee-cutout edge (top) (sta#22 to st , bracket-fuel floor bot-lh (x-6598) , bracket-fuel floor bot-rh (x-6598) , bracket fuel floor bot. lh(x=7223) , bracket fuel floor bot. rh(x=7223) , amagb bracket sta#29 to sta#30)(air , bracket for pump-lh (x9162.5) , bracket for pump-lh (x=9162.5) , bracket(airchannel blk'd assy sta#2 , bracket(airchannel blk'd assy star2 , bracket (sta#22) , bracket (fuel floor bot)-lh , bracket (fuel floor bot)-rh , rib-x-6450 , tie beam (sta#28 x-8655) , under camage door hinge fitting o , fitting slinging-lh(x=6450) , fitting slinging-lh(x=6450) , longeron top lh ista #35 to #36)

CTN :40061031

12 May, 2025 NA

Izatnagar - Uttar Pradesh

Tender For supply of bearing for lower spring beam as per drawing no. t-0-5-642 alt. 'w' item no. 1

CTN :40022675

01 May, 2025 NA

Baghpat - Uttar Pradesh

Tender For supply of machinery parts as per drawing year 2025-26 - m.s. roller for mud conveyor as per drg. 1268/r-2 dated 22.06.09) od 100mmxlength 225mm, od 90mm.xlength 200mm, od75mm.x length 630mm, od 100mm x length 740mm, c.s. trash beam bottom bracket as per drawing no. b/2008/c-1357 dated 09.07.08 conversion basis, g.r. pressure feeder nose plates scrappers to be mfg. as per drawing no. b/94/c-1087/r-2 dated 05.06.09, g.r. pressure feeder nose plates scrappers to be mfg. as per drawing no. b/94/c-1087/r-2 dated 05.06.09, on conversion basis., cast steel swing arm left hand/right hand (gear side) all over machined as per drawing no. b/2002/c-1265/r-2 dated: 22.4.2009, en-19 forged steel spur gear pinion having machine cut teeth for cane unloader, as per drawing no. b/2001/c-1256/r-1, 33 teeth., en-19, forged steel spur gear pinion having machine cut teeth for cane unloader, as per drawing no. b/2001/c-1256/r-1, 68 teeth., c.s.bearing housing with fitted 02 nos. locking camp. plate for roller shaft for mill (all over machined) to be manufactured as per drawing no. b/93/c-1011/r-2 dated: 13-06-2009 material cast steel is: 1030 grade 27-54, dismentling of chopper tubs and replacement of worn out hubs by new hubs, fitting and balancing as per drg. no. b/05/c-1129/r-1, replacement of bronze linner of mill hydralic cap, machining, buffering, fitting & testing., c.s.sprocket on conversion basis as per drg. no. b/94/c-1056, maching of transmission gear shaft from old shaft as per drg. no. b/2001/c-1258/r-1(material-cl-4, is-2004), c.s double sprocket 76 teeth for welding & machining with teeth cutting, c.s double sprocket 25 teeth for welding & machining with teeth cutting, pinion 38 teeth of new main bagasse carrier chain, pinion 25 teeth of new return bagasse carrier chain, pinion 52 teeth of old main bagasse carrier chain, pinion 25 teeth of old main bagasse carrier chain, worm & worm wheel for crystlizer as per drg. no. b/73/c-310, worm as per drg. no. b/75/c310, en-9 forged steel pin for mill a frame as per drg. no. b/2010/c-1377 dated: 12.06.2010. (2 section per pin), c.s. gr 26/52 is-1030 machined knife holder hub for cane leveler as per drg. no. b/2007/c-1337/r-1 dt. 17.07.2022 (without key), repair of links hole of block type chain, c.i. idler for cane carrier as per drg. b/2007/c-1340 on conversion basis with machining, repair of pinion teeth-38 of bagasse elevator, c.s. sprocket wheel 14 teeth for cane carrier head shaft maics-26/52, is 1030 as drg. no. b/94/c-1041/r2 dt. 20.06.2007, en-24 helical pinion with shaft no. of teeth-19, od-90mm, root dia-72mm,teeth face wide-180mm, total pinion shaft length-490mm as per sample, leaf spring supporting frame for grader as per drg. no. b/2022/c-1530. type-1 (spring steel flat size 75 x 8mm), en-9 steel shaft for mill house crane as per drg. no. b/2020/c-1571, mark-1, repair of chain block 02 ton cap., repair of chain block 01 ton cap., repair of chain block 05 ton cap., repair of chain block 03 ton cap., en-9 forged steel pin for mill a frame as per drg. no. b/2010/c-1377 dt. 12.06.2010 (2 section per pin), metalon/teflon ptef bush for rotary screen as per drg. no. b/2024/c-1562 dt. 04.07.2024, brass seat for juice heater double beat valve size 8 as per drg. no. b/2024/c-1564 dt. 14.07.2024

Central Government/Public Sector

CTN :40028350

29 Apr, 2025 NA

Bhavnagar - Gujarat

Tender For supply of lower spring beam arrangement to icf drg. no. t-0-5-667, alt-k/nil , col-i and conforming to icf spec. no. icf/md/spec-094 rev.00. the firm shall fulfill the requiremen ts as per icf spec. no. icf/md/spec-147 rev-02 with amendment no.1. finished items shall b e packed in wooden crates to avoid paint damage during transit and machined surfaces to be rust proof oil coated and covered with bio-degradable plastic sheets not less t han 50 microns. the item should be coated with two coats of high performance anti co rrosive epoxy coating (two packs) green finishing to rdso spec. no.m&c/pcn/123/2018 & a mdt-1b [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :40029127

08 May, 2025 NA

Tirupati - Andhra Pradesh

Tender For supply of lower spring beam arrangement for self generation ac coaches, confirming to icf spec.n o. icf/md/spec.094 and icf/md/spec.147,rev.2 amend-1 to icf drg.no.wlrrm-0-5-006,(without bush on itme-6 and item-7) col-1, alt. g/nil [ warranty period: 60 months after the date of delivery ]

Central Government / Public Sector

CTN :40038164

07 May, 2025 NA

Multi City - Multi State

Tender For supply of lower spring beam

Central Government/Public Sector

CTN :40003597

21 Apr, 2025 NA

Multi City - Multi State

Tender For supply of lower spring beam t-05-667 c-i

CTN :39975381

22 May, 2025 NA

Multi City - Multi State

Tender For supply of bush for equalising stay for lower spring beam (16.25 t axle), size: od 42 (+0.35/+0.15) mm x id 32 (+0.2/-0.1) mm x length 32 (+0.0/-0.5) mm.drawing no. : rdso's drg. no. sketch - 81039, alt. 15, item no. 3.material and specification : (i) hppa to rdso's spec. no. rdso/2009/cg-17 (rev. 3 / april 2023) or (ii) slpr to rdso's spec. no. c-k605 (rev. 3 / april 2023).

Central Government/Public Sector

CTN :39905274

24 Apr, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of bracket (lh & rh) for lower spring beam drawing no:- wlrrm-0-5-006 alt (g) & (0) it em - 6 & 7 (50% lh & 50%rh) [ warranty period: 30 months after the date of delivery ]

Friction Shoe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector