Latest friction sleeve Tenders | Government friction sleeve Tenders

CTN :45319009

04 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of spider 100126104560 , formed wire spring 100100203041 , sleeve gasket 100101106035 , outer gasket 100101106054 , locking spacer 100101106071 , elbow ss 316 1 by 2 inch unef m 100800302041 , anode plug adaptor 100200139505 , xl module standard xl200 er6150b 101301602001n , powerpack for edi xl200 er6150b 101301602501n , running time meter er6150b 101102105051 , single phase proctector er6151b 101101016001 , sv mount for permeate tank 102000301006

CTN :45309335

13 Jun, 2026 14.13 Lacs

Murshidabad - West Bengal

Tender For procurement of miscellaneous items for unit 4 overhauling, sgtpp - sgtpp, air filter, complete set, 250 srs filter for paph/saph [500 mw boiler] air motor veljan , port size 1inch bspt (body ported), max pressure10 bar having 40 micron sintered bronze filter element with manual drain, alumin wl & nitrile seals ( (oil side set) ), bowl of air filter for air motor of paph/saph [500 mw boiler] veljan with manual drain suitable for 250 srs filter,moc: poly carbonate. ( (oil side) ), silencer (pn:400450035) for air motor of paph 400450035 iec dusterloh ( for paph & saph air motors ), hose barb/nipple size 3/4" mnpt x 1/2" ( hose nipple 1/2 "x 1/2 "-120 nos and hose nipple 3/4 "x 1/2 "-80 nos. outer thread at one end and one end will be fitted with 1/2" rubber hose moc: ms application area: air boosting line at mrhs [quoted as per additional text description] ), needle valve,ss316 ( size: inch 3000 psi ,moc ss 316, ferrule end connection make:baldota. [quoted as per additional text description] ), flexible hose, id-12.7 mm, l-613 mm, for oil gun 500mw boiler , moc: ss 304, ms split pin # ( ms split pin, size: 4x80 [quoted as per additional text description] ), split pin # ( ms split pin, size: 3x80 [quoted as per additional text description] ), rubber hose size 1/2" ( 1/2 inch flexible rubber hose. moc: high quality braided rubber application area: at dome cooling water line of mrhs. [quoted as per additional text description] ), jubilee clamp; size: 1 ( jubilee clamp: 1/2 inch application area: at hose of air boosting line at mrhs. moc: gi [quoted as per additional text description] ), expansion joint,mrs,mill xrp 1003 for mill xrp 1003 dia- 241 mm., length- 210 mm. ( expansion joint,mrs,mill xrp 1003 for mill xrp 1003 dia- 241 mm., length- 210 mm. with extra flange attached with inner sleeve,pressure rating - 3.5 kg medium - coal reject. minimum temp to be withstood-300 deg c. ), hose, seal air, mill xrp 1003 ss flexible hose, od - 64 mm. length - 900 mm.both side hex nut socket fittings, filter,suction,600x600x50mm,ss net 3layers,5 micron ( application: for ac & dc scanner air fans ), loctite super glue in tubes 013 gms/2gm tube ( loctite sl 5910 each contains: (300 ml) [quoted as per additional text description] ), loctite 270 (thread lock) # ( loctite 241 each contains: (50 ml/51.3 g) [quoted as per additional text description] ), stainless steel net, width:470mm for 500 mw boiler trough seal , wire thickness: 5 mm, square gap:11 mmx11mm, moc: ss 416., lubricating paste altemp q nb 50 for pa & fd fan make- kluiber ( total 5 nos of tubes. each tube contains 80 gm ), strainer for blowdown transfer pump part no-15 wpil pump model: vo wpe 80-400/ 100-320,drawing no. bvk-50150-151/50152-153/50154-155, moc:ms ( application: boiler blowdown pump moc: ms ), shaft set,moc- ss410,vo wpe 100/320 for blowdown transfer pp vo wpe 80/400 & 100/320 pt no-7 wpil for pp sl no. bvk-50150-151/bvk-50152-153/bvk-50154-155 ( 4 sets: slightly larger, 2 sets: slightly smaller dimension as per drawing ), screw,self drill,washer,5.5x25mm ( hex flange head-pvc washer blue zinc coated-coarse thread size: 5.5x14x25 mm make: welfast ), coupling sleeve for blowdown transfer pump wpil part no-21 wpil pump model: vo wpe 80-400/ 100-320,drawing no. bvk-50150-151/50152-153/50154-155,wpil,moc: ss 410 ( shaft sleeve /coupling sleeve-a. as per drawing of boiler blow down pumps spares ), shaft sleeve for blowdown transfer pump wpil part no-19 wpil pump model: vo wpe 80-400/ 100-320,drawing no. bvk-50150-151/50152-153/50154-155, moc: ss 410 ( shaft sleeve-b. as per drawing of boiler blow down pumps spares. ), rubber bearing ( rubber bush/cut less bearing, moc:inner: teflon, outer: brass (copper-85%, tin-85%, lead-85%, zinc-85%). as per drawing of boiler blow down pump#s spares (larger-10+smaller-5) ), bush bearing/ b. housing for blowdown transfer pump wpil part no-20 wpil pump model: vo wpe 80-400/ 100-320,drawing no. bvk-50150-151/50152-153/50154

CTN :45332729

12 Jun, 2026 5.00 Lacs

Saharanpur - Uttar Pradesh

Tender For supply of wooden hand wire brush 3 inch x 6 inch , teflon tape , rustolene pidilite make 500ml , holdite 500 gm pack , grinding wheel ag 4 inch carborandum universal make , grinding wheel ag 7 inch carborandum universal make , brasso liqued in tin of 100 ml , araldite in 1.80 kg pack , emery cloth in 500 sheet fine carborandum universal make , emery cloth in 500 sheet rough carborandum universal make , emery tape 50 mtr roll size 2 inch fine carborandum universal make , emery tape 50 mtr roll size 2 inch roughcarborandum universal make , cotton waste , m seal 1 kg pack , blue tube 15ml , piano wire , graphite powder fine , hacksaw blade , marken cloth , gulli grinder , grinding wheel 2inch , grinding wheel 4inch for ag 4 grinder , grinding wheel 7inch for ag 7 grinder , buffing wheel 4 inch for ag 4 grinder , buffing wheel 7 inch for ag 4 grinder , cutting wheel 4inch for ag 4 grinder , cutting wheel 7inch , cutting wheel 14inch , silicon brazing rod size 3mm , klinger make b-9 borocilicate gauge glass , stainless steel plate , anabond 112 thread locker , loctite 609 retaining compound in 50ml , loctite 641 retaining compound in 50 ml , emery paste rough , emery paste fine , brass rod , boiler gauge glass , solenoid valve with coil two way , solenoid valve with coil one way , stag jointing paste , galva coating gcs 73 , grinding wheel black for bench grinding machine , grinding wheel green for bench grinding machine , usha martin make steel wire rope , love joy coupling set l-70 , love joy coupling set l-75 , love joy coupling set l-90 , love joy coupling set l-100 , love joy coupling set l-110 , spring washer bbbb make , spring washer , split pin champion make , anabond 666 , leather hand gloves , rubber star for coupling set l-70 , rubber star for coupling set l-75 , rubber star for coupling set l-90 , rubber star for coupling set l-100 , rubber star for coupling set l-110 , ring spanner set 6mm to 32 mm taparia make , d spanner set 6mm to 32 mm taparia make , paint brush , red oxide primer british paint asian make , g p thinner , borex powder , graphite fire crucible 120 kg , ss flat grade 304 , silver brazing flux , gauge glass sleeve , gauge glass rubber cone , hardware item 1 , hardware item 2 , hardware item 3 , hardware item 4 , hardware item 5 , hardware item 6 , hardware item 7 , hardware item 8 , hardware item 9 , hardware item 10 , hardware item 11 , flexible hand grinder , rubber hose pipe 1 , rubber hose pipe 2 , rubber hose pipe 3 , rubber hose pipe 4 , rubber hose pipe clamp , wire rope clamp , high temperature putty , full link coupler , half link coupler , bearing 1 , bearing 2 , bearing 3 , bearing 4 , bearing 5

CTN :44467448

27 May, 2026 NA

Netanar - Chhattisgarh

Tender For bid to ras corrigendum : supply of 1600670733 ct fill pack mc 67 80 43846 fill pack m , 1600670732 ct el blade il 146 49 3110 pvc , 1600670731 ct el blade il 146 49 2995 pvc , 1600670730 ct spacer for drift e 00 4005 1 pp or , 1600670729 ct ns 5a nozzle 82 42705 096 pp , 1600670728 ct ns 5a nozzle 82 42705 104 pp , 1600670727 ct diffusion ring 80 4945 1 10.g , 1600670726 ct kit d s 175 ii nbm inse , 1600670725 ct pipe cap 160od 96 207 , 1600670724 ct buckle band it ban 3 8x0.025in ss , 1600670723 ct band it band 3 8 in x 0.025 , 1600670722 ct hanger 50x6 96 3039 12 , 1600670721 ct hanger 50x6 96 3039 2 , 1600670720 ct pipe sleeve 15nbx250 lgt g , 1600670719 ct bolt hex hd m12x300 ss304 , 1600670718 ct stud m12x860 min50 i , 1600670717 ct hex nut m12 1.75 is136 , 1600670716 ct washer sc m12 ss304 or eq , 1600671687 cooling tower dpipe cl2 96-4080-208 , 1600671686 ct tee bsp p88-1189-1 , 1600671685 cooling tower branch pipe p87-1024-2 p , 1600671684 ct gskt p89-2097-02 , 1600671683 ct adapter arm assy p90-4061-21 pp , 1600671682 ct gskt p89-3038-04 epd

CTN :45305462

16 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For supply of ecp bulk acid unloading pumps and bulk acid transfer pumps spares for regular and breakdown maintenance of the equipment in sd-i - casing o ring, neophrene, p.no.30 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, splite flange delivery,ci(is:210gr.fg260), p.no.29 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, splite flange suction, ci(is:210gr.fg260), p.no.28 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, coupling key, ss (6x6x630) p.no.27 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, gland plate studs, m8, p.no.26 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, casing studs, m12, p.no.25 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, o-ring far end, (80x30)neoprene, p.no.24 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, impeller gasket, viton, p.no.22 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, thrower, uhmwpe, p.no.21 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, o ring (drive end), 90x3 neoprene, p.no.20 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, oil drain plug, zinc coated ms, p.no.19 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, oil seal (far end), 30x42x10, p.no.18 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, housing support, ms (is:2062) ,p.no.17 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, shaft, ss 431 ,p.no.14 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, breather, zinc coated m.s., p.no.13 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, casing mouting ring, ms (is:2062), p.no.10 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, oil seal (drive end), 35x47x10, p.no.09 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, bearing cover (f e), ci(is:210gr.fg260), p.no.08 for pump model: pphp3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, gland cover, ss-316, p.no.07 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, bearing cover (d e), ci(is:210gr.fg260), p.no.06 for pump model: pphp3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, bearing housing, ci(is:210gr.fg260)p.no.05 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, shaft sleeve, hostelloy c, p.no.04 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, back plate, uhmwpe, p.no.03 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, impeller, uhmwpe, p.no.02 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, impeller casing, uhmwpe, p.no.01 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440

CTN :45295825

29 May, 2026 10.00 Lacs

Bhind - Madhya Pradesh

Tender For purchasing of handpump material for financial year 2026-27 third call - is 1239/1990 32 mm dia gi riser pipe in 3 meter length socket on end, ms connecting rod 12mmx3meter long, handle heavy duty 120 mm long isi mark, mark 2 upper valve (brass) complete, mark 2 lower valve(brass) complete, gi water chamber heavy duty, rubber washer best quality for upper valve isi mark (chidhiya washer), rubber washer best quality for lower valve isi mark ( khadi patti ke ), 32mm dia gi pipe socket isi mark, rod socket heavy is mark 12 mm dia, cylinder brass complete isi mark, ms plunger rod for cylinder, galaxy chain heavy duty isi mark, chain pin (nut-bolt 15 no.), ms axle heavy duty, guide brass, hand pump nut bolt 18-19 no., skf bearing 6204, o ring, isi mark india mark-ii deep well hand pumpcomplete ( without cylinder ), handpump ss cylinder liner/sleeve, isi mark india mark-ii deep well handpump head, cheak valve brass, assembly cheak valve, leather washer best quality, 4 no. sikanja, pana 12-13, pana 14-15, pana 16-17, pana 17-18, pana 18-19, pana 20-21, chabi 12-13, chabi 14-15, chabi 16-17, chabi 18-19, chabi 20-21, plas tapadiya and equvelant, patchkus tapadiya and equvelant, dai 1.25 inch, dai 4 suti sariya ki, hatoda 1.5 kg ka, hatta sapjimat, chain block, end cap, chain pully 2.5 ton, chain pully 5 ton

State Government

CTN :45287547

26 May, 2026 NA

Chandrapur - Maharashtra

Tender For supply of fins, scallop bar, ms/ss flats, boiler attachments, soot blower sleeve, chicken wire mesh, corrugated sheets and allied spares for boiler during aoh at unit 8 , cstps chandrapur. - , boiler tube fin size 12.5 x 6 th, ms ww tube fin 10 x 10 th, heating element / sector system ms flats, flat ss 304 rectangular 50 x 6 mm, ss round rod locking of cassette baffle, ms ww clit for ww "z" panels, ww trapezoidal bar 30x10x20 in 200 mm l, ww scallop bar for furnace seal trough, blr sbww 0 0 slev for wall dislager, burner tilt lever round pin, bar brass round dia 90 mm bar brass round dia 125 mm, hardwr mesh wire ss 1m wide, cladding metal gi corugated sheet 18 swg

State Government

CTN :45301090

26 May, 2026 NA

Chandrapur - Maharashtra

Tender For procurement of bottom ash hopper and feed gate related spares in unit-3 coh at ahp 210mw, cstps, chandrapur. - ahp basys fdgate guide angle, bhel seal trough flushing nozzle small, ahp basys hop hopper flushing nozzle, ahp basys cg chamber glass, hose,flex ss corrugat,1/2" bsp(f) l 0.5m, ss corrugated 1/2" bsp (f) l 0.7 m, ball valve cs comp asly size-25 mm, body cs complete ball valve 15 mm, ball body cs comp vlv 1 / 2", ball valve cs comp asly size-50 mm, lubricant, coolant audco sealant 731-a, lubricant, coolant audco sealant 731-b, lubrcnt grease audco sealant 731-d, nut bolt for 200 nb sleeve, sleeve coupling 200 nb ms coupling set, shaft sleeves set complete

State Government

CTN :45146120

25 May, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - 3 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 3 h.p. submersible pump set with column pipe from bore well, cost towards rewinding and repairing of 3 h.p submersible motor with s/f suitable winding wire, bronze bush etc. all complete after the deduction of cost of scrap materials., cost towards repairing of 3 h.p. submersible pump with s/f bronze impeller as per size and sample, bush, thrust plate, pump shaft etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 40 mm dia. upvc column pipe., cost towards supplying and fitting (1) 40 mm dia g.m. full way valve 1 no (2) 40 mm dia nr valve 1 no (3) 40 mm dia g.i. bend 2 nos. (4) 40 mm dia m.s. clamp with nut bolt 2 pair after the deduction of cost of scrap materials., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., supplying and installation suitable size panel board for 3 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., providing all labour, tools tackles and technicians for lowering of 3 h.p submersible pump set with all accessories in the bore well, 5 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 50 mm dia. upvc column pipe., supplying and installation suitable size panel board for 5 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., providing all labour, tools tackles and technicians for lowering of 5 h.p. submersible pump set with all accessories in the bore well, 7.5 h.p. submersible set -, providing all labour, tools, tackles and technicians for taking out 7.5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 7.5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 7.5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., providing all labour, tools tackles and technicians for lowering of 7.5 h.p. submersible pump set with all accessories in the bore well, transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., provision for leakage repairing of different size of upvc sch- 80 pipe in place of existing / cracked and damaged pipe of isi approved make or equivalent make damaged pipe in trenches and replacement of pipe and fitting so as to give 1 m average cover over the socket of pipes with disposal of exc

State Government

CTN :45190381

08 Jun, 2026 14.90 Lacs

Anuppur - Madhya Pradesh

Tender For corrigendum : procurement of spares for sadc damper actuator, installed at 210 mw atps, mppgcl, chachai - for sadc actuators type : a0404112214 , sadc actuator assembly(model-a0404112214) consists of:- accessories- 04’’x04’’ cylinder, pneumatic double acting class-1 positioner fitted with 04 pressure gauge of 40mm dial, double acting alr, air filter regulator, ss tubing, fork with pin. , class-1 pneumatic double acting positioner with accessories:- manifold assembly, 04 connectors, 40mm dial pressure gauges, crank lever assembly and feedback lever etc. , pneumatic double acting positioner with in built non contact type hall sensor operated pft only , seal kit for class 1 positioner(seal, gasket and o-rings) , sleeve & spool assembly complete with 12mm o-ring for class – 1 positioner , leather bellow with clamp & nut bolt for sadc power cylinder , diaphragm assembly with seal, gasket & o-ring set for class -1 positioner , double acting air lock relay port size 1/8 inch npt (f) , main spring holder assembly for class -1 positioner , crank lever assembly mounted on cover-a base plate of class-1 positioner , double acting aluminium manifold assembly with sleeve & spool & “o ring” , feedback lever complete assembly with nuts and spring washer , o-rings & seal kit for sadc power cylinder , crank assembly sealed zz type bearing , anodised, zinc plate fork for sadc cylinder , fork pin for coupling cylinder with damper

Friction Sleeve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government