Get complete information related to latest Frp Pipe Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Frp Pipe Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Frp Pipe Tenders.
Tender For fabrication, dismantling and erection of pipe lines for repair/ replacement of damaged pipelines / installing new lines / modification / re-routing etc. at various location, replacement of corroded / damaged jack support of the suction and discharge
Tender For repair and replacement of public health fixtures accessories and all other items in house no 20 type 6 sector 7 chandigarh (2216 np (p) maintenance and repair - excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m dsr 2.10, all kinds of soil. dsr 2.10.1, pipes, cables etc. not exceeding 80 mm dia. dsr 2.10.1.1, pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia dsr 2.10.1.2, brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : dsr 6.4, cement mortar 1:4 (1 cement : 4 coarse sand) dsr 6.4.1, providing and fixing white vitreous china pedestal type water closet (european type) with seat and lid, 10 litre low level white vitreous china flushing cistern & c.p. flush bend with fittings & c.i. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : dsr 17.3, w.c. pan with isi marked white solid plastic seat and lid dsr 17.3.1, providing and fixing wash basin with c.i. brackets, 15 mm dia cp brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: dsr 17.7, (a) white vitreous china wash basin size 550x400 mm with a 15 mm cp brass single hole basin mixer dsr 17.7.3, providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.dsr 17.8, providing and fixing white vitreous china water closet squatting pan (indian type) : dsr 17.13, orissa pattern w.c. pan of size 580x440 mm dsr 17.13.2, providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. dsr 17.19, 10 litre (full flush) capacity-white dsr 17.19.1, providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings as dsr 17.28, 32 mm dia : dsr 17.28.1.1, providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, incl. cost of cutting and making good the walls and floors. dsr 17.60, 100 mm inlet and 75 mm outlet dsr 17.60.2, sand cast iron s&s as per is- 3989 dsr17.60.2.1, providing and fixing g.i. pipes complete with g.i. fittings and clamps,i/c cutting and making good the walls etc. : dsr 18.10, internal work - exposed on wall, 15 mm dia. nominal bore : dsr 18.10.1, 20 mm dia. nominal bore : dsr 18.10.2, providing and fixing of forged brass / gm gate valve, size 20mm i/d dsr 18.17.1a, providing and fixing uplasticised pvc connection pipe with brass unions : dsr 18.21, 45 cm length : dsr 18.21.2, 15 mm nominal bore : dsr 18.21.2.1, providing and fixing g.i. union in g.i. pipe including cutting and threading the pipe and making long screws etc. complete (new work) : dsr 18.46, 15 mm nominal bore : dsr 18.46.1, 20 mm nominal bore : dsr 18.46.2, providing and placing on terrace (at all floor levels) polyethylene water storage tank, isi : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. dsr 18.48, providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 : dsr 18.49, 15 mm nominal bore. dsr 18.49.1, providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standards and weighing not less than 69
Tender For tender for supply of wick long tab , valve plug , o ring ohaulingkithp pumpseal retainer , front , anode plug , hp pump seal kit , oil filler cap , oil seal crankshaft , plunger rod pin , v-packing case , hp pump female adapter , hp pump male adapter , valve spring retainer , valve plug 70 kg , hp pump anode plugs , seal kit , valve set , oil seal crankshaft , connecting rod assebly , plunger rod , plunger rod pin , oil seal crank case , seal retainer - 2 pc , barrier slinger , hp pump inlet manifold , adaptor h.p.pump , male adaptor , v packing spacer , spacer with coil springs , valve plug 70kg , o ring overhauling kit , crankcase casing , straight connector 3-8 , permeate male elbow , cartridge filter element , nozzleset for filter consist of filterhead tube strainer , frp filter type 1354 , nozzle set for frp filter 1354 , nozzle set for sand filter , head distributor , media for sand filter grade-i , support gravel 1.5-3.0 mm , support gravel 2.0-3.0 mm , dolomite , membrane cleaner 22 , membrane cleaner 33 , membrane solution 44 , h.p pump c case oil , jubilee clips 00 13 mm to 20 mm , s.s jubilee clips 1x 30 mm to 40 mm , ss jubilee clips 2x 45 mm to 60 mm , high pressure manifold 3 x 2 arrangement , high pressure manifold 6 x1 , module bypass nozzle , support bracket , pure water manifold , pu9 hose , tie rod nut high , h p connection feed/brine , lip seal dt module , membrane cushion , blue hydraulic disc , o ring for head distributor assembly , o ring hp connection , o ring hydraulic disc , o ring distance fitting inside , o ring distance fitting outside , o ring tie rod screwing inside , o ring crank case cover , o-ring pos. no. 412 for speck pump npy 2051 , high pressure hose module outlet , hp flexible hose , h.p hose feed inlet-brine outlet , brine r/w h.p. flexible hose , brine r/w hp flexible hose-xl , brine raw water high pressure , rubber hose from c-f outlet to hp pump inlet 20-30tpd , lp hose for prefilter pump , hose for pk-20 pump in-out , product water flex hose-fm manifold to plant , lp hose brine - permeate , end conn hoses brine/permeate , rubber hose 20mm , lp hose for air line , av mount akcc 85m , mounts for plant , a/v mount for hp pump trolly , h.p pump driving belt set of 2 , coupler for victaulic coupling 1 , victaulic couplers 1.1-4 , belt spanner , pulsation damper , jubilee clip 40mm , membrane solution 44 , pressure switch , belt hp pump driving , hp pump anode plugs , contractor , o-ring for deacidification filter , o-ring for cartridge filter , kit wear parts , sleeve gasket , neck ring p 45 , neck ring retainer , motor for 30tpd filter prefilter pump , mechanical seal p 105 , sleeve gasket p 37 , corrugated spring p 60 , spacing pipe - 66.a , bearing ring p 47a , spacing pipe -p 64.c , slotted nut p 67 , coupling complete for pump 202699 p 8 , stay bolt for pump p 26 , chamber complete p 4 , neck ring p 45 , neck ring retainer , pump shaft complete for pump 202699 p 51 , chamber with bearing ring p 4a , impeller , spacing pipe - p 64.a , wear part kit - repair kit , split pin , ball bearing , p 154 , shaft pin p-10 , top guide vane p 50a , spacing pipe p 64 , chamber stack for pump 202699 p 80 , chamber , crn 1- 4 pump spindle , crn 1- 4 pump shaft seal p-105 , o-ring 137.5 od x 3.3 thk , shaft pin 50d x 26l , o-ring 16.3od x 2.4 thk 100 , neck ring , neck ring retainer , impeller 30.6id x 73 od x 9h , shaft seal , chamber with bearing ring , neck ring retainer , chamber with bearing ring) , shaftseal p105 , kit , gaskets , cm 3-5 pump 415v 3ph 50hz.ip55 , cm 3-5 sleeve p-16 , cm 3-5 impeller p-49 , chamber , seal ring , filter pump permeate pump , filter permeate pump casing , ring-circlips p-931 , filter permeate pump grub screw , o ring , shaft seal , casing p-1 , reverse vane impeller , p-2b , shaft p-6 , cover for mech seal , sleeve shaft p-14 , i b bearing p-16 , o.b. bearing p-18a , circlip internal p-18b , oil drain plug