Latest frp channel Tenders | Government frp channel Tenders

Central Government / Public Sector

CTN :40538463

23 Jun, 2025 NA

Secunderabad - Telangana

Tender For fabrication and supply of traction swr diagram boards (station working rules) / section diagram of size approx. 4'x3' or 6'x4' or 5'x4' on suitable acrylic frp sheets framed in teak wood/ metal frame as per approved swr dia gram ( station working rules) with coloring as per code of section: based on the approved tswr diagram, contractor s hall prepare tswr diagram board. the work includes the supply of ohe section diagram of the specified area / location on 6 mm thick acrylic frp sheet board of mentioned dimensions or of other higher dimension suitable for clear visibility. the tswr diagram 6 feet x 4 feet , 4 feet x 3 feet size or any other size as required by railways. frame shall be havin g suitable hinges to be fixed on the wall in front of station master room. note: ohe / swr ( station working rules) / sect ion diagram of the specified area / location will be provide by sr.dee/trd/sc office after releasing of purchase order. [ warranty period: 30 months after the date of delivery ]

CTN :40345149

06 Jun, 2025 NA

Chamoli - Uttarakhand

Tender For corrigendum : supply of ug hardened bunker - tape insulation half inch 15 mtr with isi mark. , ceiling rose. , stainless steal iwc wash down water closet pan pedestal pattern with fixing bolts and p trap including seat cover as per ts , stainless steel wash hand basin white pedestal type flat back or angle back type size 500 x 400mm including fittings with flexible pipe 450mm long pvc connection. , angle valve 15mm dia brass chromium plated for whb. , bib cock 15mm dia brass chromium plated long body. , pillar cock 15mm dia brass chromium plated long body. , stop cock 15mm dia chromium plated for flushing cystern. , stainless steel grating with hole 75mm dia for waste pipe of whb. , stainless steel grating without hole 75mm dia for toilet. , floor trap 75mm dia. , pvc pipe 110mm dia , pvc p trap 110mm dia , pvc connection 600mm long with brass check nuts and rubber washers. , pvc short connection pipe 110mm dia and 300mm long with socket and necessary fitting. , pvc bend with oval access door 110mm dia. , pvc plain bend 110mm dia , pvc t 110mm dia , pvc socket 110mm dia , pvc socket 75mm , pvc bend 75mm , ppr pipe 32mm outer dia with isi mark. , ppr pipe 20mm outer dia isi mark. , puf insulated frp water tank capacity 1000 ltrs. , ppr gate valve of 32mm outer dia. , ppr elbow 20mm, isi mark. , ppr tank connector inner dia 32mm. , ppr reducer 32x20mm outer dia. , ppr tee reducer 32 x 20mm. , ppr elbow 32mm, isi mark. , ppr socket 32mm, isi mark. , ppr union 32mm dia, isi mark. , ppr tee 32mm dia, isi mark. , ppr tee 20mm, isi mark. , ppr socket 20mm, isi mark. , ppr union inner dia 20mm. , ppr wall clamp dia 25mm. , ppr wall clamp dia 15mm. , ppr brass elbow 20mm . , ppr brass socket 20mm . , ppr brass fta 20mm . , ppr brass mta 20mm . , ss nipple 15mm x 25 mm long . , pp-r tee brass 20mm . , septic tank for toilet , taflon tape , rifle rack for 10 rifles , oxygen cylinder kit with trolley 10.2 ltr , fire extinguisher 6 kg , cut off machine 14 inch chop saw metal cutter heavy duty gco 220 , esab arc 200i igbt single phase portable 200a mm a inverter welding machine with complete fittings , durmut 5 kg with 5 feet wooden handle , hand gloves rubber best quality , pan motor tasala 18 inch dia made of steel , phawrah with handle midium size , measuring tape 3 mtr rectractable grade a 1 16 , wiremess for seiving sand 1 mtr width 15mtr roll , axes picks 3kg head with handle , crow bar hexagonal 1200mm long x 40mm dia , gumboot various size , spirit level 10 inch long , nylon mason thread 100m long , plumbob steel with lasing , water level pipe for mason work transparent , hammer 10 kg with handle , tmt bar bending frame , tmt rod bending handle , wooden gurmala , aluminium study , steel gurmala , hdpe tirpal of size 30 feet x 30 feet , steel bucket 15 ltr , iron cutter blade 14 inch , iron cutter blade 4 inch , hexa blade double side , ventilators , connected stores as per final design

CTN :40423805

05 Jun, 2025 NA

Darjeeling - West Bengal

Tender For corrigendum : construction of hardened amn bkr (30 mt ) under the aor of hq 27 mtn div - part i :concrete , plastering work and water proofing compoundpart ii : reinforcementpart iii : centering shuttering & formwork, pre-fabricated mild steel door of size 1100x1700mm outer frame made out of isa 40x40x6mm and door shutter frame of isa 35x35x5mm and all as stiffner of isa 30x30x3mm as per drawing, app bitumen membrane sheet of grade 2504 thickness 3.0mm type film, size 20mx1m, minumum weight 2.25kg/sqm,, polythene membrane sheet of grade 2504 thickness 150micron, hdpe sand bag of size 34 x14 inside insulated interlocking stitch weight of the bag is42-45 gram/bag, anti freezing compound approved by accepting officer / confirming to latest is standards, water proofing compound in 1 kg packing,, pre-fab steel jally made up of isa 30x30x3mm frame and cover frame made of 25x25x3mm and 10 mm dia bars in jally @ 25mm centre to centre bothways welded to frame of size 900x900mm complete all as per rfp & drg ., pre painted cgi sheet 2100mm x 800mm x 0.63mm,, 50mm thk pcc jumbo interlocking coloured tiles,each tile covering and area of 0.0264sqm (0.12mx 0.22m), confirming to is- 15658-2006, alkaline pipe 50mm dia., fire resistance paint for internal surface., fire resistance primer for internal wall surfaces, synthetic enamels painting to steel surfaces as specified., red oxide primer., bitumen 80/20 grade,, structural steel ismb300, 6.60 mtr length (roof beam), shs 75x75x5mm 6.60 mtr length (roof beam), deck sheet-1.0mm tr-80 grade,350, 12mm thick ms base plate of size 0.30x0.30 mtr (column), 5mm thick ms plate of size 0.300x 0.40 mtr(90 degree angle), anchor bolt of 20mm dia,0.45mtr length, hdpe pipe(rain water pipe) 75mm dia best quality, hdpe hose pipe 25mm dia (bore) corrosion resistant for water supply pumping water with min thickness of 0.25mm with working pressure 14.22 psi and bursting pressure 28.44 psi., 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set. make : kirloskar, crompton, honda and quivalent., fire extinguisher a/b/c type portable net 2 kg capactiy cylindrical isi marked (bis 15683 : 2006 range > 2 mtrs (minimum) with discharge pipe & nozzle complete and suitable bucket for hanging on wall., lighting conductors set complete with all accessories as per details given below:-(a) zinc & alloy coated safe earthing electrode (76.3mm dia) 2mtr long with back filled compound conduct lite - 2 bags cpri approved.(b) air terminal four pointed aluminium rod 12mm dia and 600mm long fitted on gi pipe.(c) gi pipe med grade 06 mtr long 40mm dia. make: tata/ jindal/ bansal.(d) epoxy insulator with screw 10 nos.(e) copper cable 35 sqmm multi-stranded single core. make : plaza/ havells/ rallison/ isi-10 r/m.(f) testing points terminal box made out of gun metal or phosphorous of size 75 x 75 x 25mm with screw.(g) nut & bolts 2" x 1/2" - 08 nos(h) foundation nuts & bolts 16mm x 400mm - 4 nos(j) frp earthing pit with cover -01 nos(k) copper lugs 35 sqmm for connection of cable with nut & bolt of suitable size - 02 nos, electric earthing set complete with items as given below :-(a) gi earthing plate 600mm x 600mm x 6mm thick with two nos holes - 01 no.(b) gi pipe15mm dia light grade for the protection of gi wire, make : tata/jindal/prakash - 8 mtr.(c) gi pipe 20mm light grade for watering, make : tata/jindal/prakash - 1.2 mtr.(d) gi wire 4mm dia - 02 kgs.(e) gi funnel with wire mesh suitable for 20mm dia gi pipe - 1 no(f) common salt - 50 kgs.(g) frp earthing pit with cover - 01 no.(h) gi nut bolt with washer of size 10mm dia 25mm long - 2 nos. (h) charcoal - 50 kgs., supply and installation solar lantern model no ms122 solar lantern contains battery , solar pannel, led bulbs and automatic charging of working time 25 hours and led life time 40000 hrs , solar pannel of 5w li-ion type battery 2200 mah capacity of volt 7.4v, supply and installation luminous solar inverter

corporations/Associations/Others

CTN :40469403

14 Jun, 2025 NA

Nashik - Maharashtra

Tender For suppy and fixing mural and statue work in frp materail as per drawings

CTN :40493385

05 Jun, 2025 6.60 Lacs

Kozhikode - Kerala

Tender For general-mla ads 2024- 025-beypore lac- chathankaithodu- reconstruction of chathankaithodu swevcb - providing frp shutter and mechanical shutter at mannur in kadalundi grama panchayat of kozhikode district- general civil work-1

Central Government And Public Sector

CTN :40473297

30 Jun, 2025 NA

Malda - West Bengal

Tender For supply , installation & commissioning of electrical motorized wiper assembly ( 01 set include 2 lh & 2 rh) design for wag-9hc electric locomotive along with wiper blade , water tank and pump confirming to icf spec no.icf/elec/122 of make lucas tvs or similar . nec essary modification of frp in driver cab of wag9hc locomotive which includes cutting,re-fu rnishing of frp for maintenance of wiper with suitable hinge etc shall be carried out alon g with wiper assembly fixing work.the modification shall not disturb the general look of c abin and operation and maintenance of other equipment. [ warranty period: 30 months after th e date of delivery ]

State Government

CTN :40435240

29 May, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 9 numbers of district level water testing laboratories of jharkhand a-dumka zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230a15 volts a/c), stirring capacity: 50-1500 rpm, capacity of stirrer: 2 litre, plate size: 18.4x18.4 cm(approx.), make & model: branded, bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is stan

CTN :40389042

09 Jun, 2025 NA

Kolkata - West Bengal

Tender For construction of artificial rock climbing wall cum slithering platform in garrison battalion ground - earth work in excavation by mechanical means hydraulic excavator oblique manual means in foundation trenches or drains not exceeding 1 dot 5 m in width or 10 sqm on plan , providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering , providing and laying in position specified grade of reinforced cement concrete , brick work with burnt clay fps non modular bricks of class designation 7 dot 5 in foundation and plinth in ratio cement mortar 1 ratio 4 bracket 1 cement ratio 4 coarse sand , 12mm thick cement plaster 1ratio4 , filling available excavated earth excluding rock in trenches plinth sides of foundations , supplying and filling in plinth with jamuna sand under floors including watering ramming consolidating and dressing complete , steel reinforcement for rcc work including straightening cutting bending placing in position and binding all complete upto plinth level thermo mechanically treated bars , supplying of m s bolts round holding down of anchor boltds with nuts and washer plates complete , structural steel work , providing and fixing ms chequered plate 5mm thick , providing and fixing 0dot8mm thick colour coated sheet for shed , designing providing and fixing frp 3d panel with minimum 6 mm thickness at center and 10 mm at flanges , providing and fixing ss top belay bar , movable climbing holds , providing seat harness , static rope 10 mm , carabiner , providing bracket fdotodot8 bracket , providing mitton , gri gri , providing quick draw , 30mm manila rope bid number/ & ( * ) : gem/2025/b/6191380 dated/ + : 18-05-2025 bid document/ 3 3 1 / 19

CTN :40362370

26 May, 2025 NA

Sangli - Maharashtra

Tender For providing of customized amc/cmc for pre-owned products - providing installing and testing double frp urinal cabin as per scope of work with one year service warrenty; na; comprehensive maintenance contract (cmc); not applicable; no

CTN :40391448

26 May, 2025 28.02 Lacs

Delhi - Delhi

Tender For minor work to gpra qtrs. at sector-3, pushp vihar, new delhi dg. 2025-26. (sh:- provide & fixing of covering of balcony, m.s tube wiremesh & glass shutter, flush doors, frp doors and other miscellaneousllaneous works).subwork/packages:sh:- provide & fixing of covering of balcony, m.s tube wire mesh & glass shutter, flush doors, frp doors and other miscellaneousllaneous works.

Frp Channel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

corporations/Associations/Others

Central Government And Public Sector

State Government