Latest frp dome Tenders | Government frp dome Tenders

corporations/Associations/Others

CTN :45319347

15 Jun, 2026 NA

Bhilai - Chhattisgarh

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - bhilai nagar nigam area; replacement of 8 inch frp common slide height 1 point 2 m , area 0 point 5x2 point 4mwelding and fixing at site with all necessary fittings len..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - bhilai nagar nigam area; gym equipments, replacement of swing patta fiber patta for swing length 1 point 75 ft breadth 1 ft height 200 mm properly holed for grip of ch..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - bhilai nagar nigam area; replacement of see saw main frame pipe 60 or 90 mm pipe, length 3 mtr with support of 25x25x3 angle, with all necessary fittings, welding and ..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - bhilai nagar nigam area; replacement of see saw patta 2 nos seat with tee, welding and fixing at site, see saw patta have to be properly molded in pipe length 300 mm hei..,repair, main

CTN :45292808

02 Jun, 2026 NA

Sonitpur - Assam

Tender For providing of living shelter ojl - superstructure of offr jco living shelter ojls of size 12 point 00 m x 7 point 60 m x 4 point 75 m height , cement 43 grade opc packed in hdpe bag each 50 kg wt , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 40 to 63 mm graded , stone for rr masonary less than 6 inch , mild steel bar of size 6 to 8 mm dia , mild steel bar of size 10 mm dia and above , water proofing compound , ms binding wire , quick setting compound , cement 43 grade opc packed in hdpe bag each 5o kg wt , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , bricks sub class b , bricks bats , mild steel bar of size 10 mm dia and above , pvc pipe 110 mm dia 3 mtr long , pvc pipe 75 mm dia 3 mtr long , pvc cowl 75 mm dia , ms binding wire , pvc socket 110 mm , quick setting compound , pvc bend 110 mm dia , cement 43 grade opc packed in hdpe bag each 5o kg wt , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , stone boulder 9 inch to 12 inch , pvc pipe 75mm each 3 mtr long , water storage tank triple layer 1000 ltrs , fabrication from structural steel section for staging of water storage tank made of capacity 500 oblique 1000 ltrs made out of ms angle iron frame of size 50 x 50 x 6mm thick , wc european type model 2008 ewc and combi flush pvc flushing cistern of 10 ltr capacity , looking mirror of selected quality frameless of size 600x450x5mm , chromium plated toilet paper holder with flap , brass chromium plated towel rail 600 mm long 20 mm dia with cloth hooks min 04 nos , chromium plated piller cock swan neck with aerator and butter fly handle , stop cock angular type chromium plated brass 15 mm weight , stop cock t type chromium plated brass 15 mm weight , brass chromium plated shower rose 100 mm dia with bend , bib cock long spout brass chromium plated 15 mm weight , pvc connection 45 cm long 15 mm , peg set of six fitted with galvanised screws along the internal surface of the walls in the rooms , corner sheet glass shelf with two shelf assembly , soap dish ss comma flat back complete with screw , 2000 ltrs anaerobic frp oblique ldpe septic tank alongwith all accessories , ppr pipe 32 mm dia , ppr pipe 20 mm dia , ppr socket 32 mm , ppr elbow 90 degree 32 mm , ppr elbow 20 mm , ppr female thread elbow 90 degree 20 mm dia , ppr female thread t 20 mm dia , ppr plain t 32 mm , ppr reducer t 32 to 20 to 32 mm dia , ppr union 32 mm , tank connector 32 mm , pvc wall clamp 32 mm , pvc wall clamp 20 mm dia , float valve 20 mm , gate valve 32 mm , m seal 150 gm pkt , taflon tape roll , solvent cement 150 gm tube , pvc waste pipe 32 mm and 1m long , chromium plated waste coupling 32 mm dia , non skid ceramic tiles of size 300mmx300mm on the floor minimum thickness shall be between 6 to 8 mm tiles , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick , cp grating 100 mm dia , pvc pipe 110 mm dia 3 mtr long , pvc socket 110 mm dia , pvc bend110 mm dia , s trap vitreous china , curtain arrangement drapery and rod made of 25 mm dia and 1600 mm long alongwith fixing arrangement complete , pvc air pipe 32 mm dia , white cement , vitreous china wash hand basin white of size 450mmx300mm with vitreous china pedestal , ppr reducer elbow 32mm x 20mm dia , brass cp wall mixer for mixing hot and cold water screwed down for ppr pipe of dia 20mm , brass cp jet water spray for ewc , plastic dustbin of capacity 40 ltrs , distribution box 8 way spn comma 240 volts copper bus bar and neutral link earthing stud , mcb spn 240 volts 32 amps , mcb sp 6 to 32 amps , pvc tape 19mm wide 5 m long , cable pvc insulated electric cables heavy duty copper conductor of size 1 point 5 sqmm single core , cable pvc insulated electric cables heavy duty copper conductor of size 4 sqmm single core , cable pvc insulated electric cables heavy duty copper conductor of size 2 point 5

Central Government/Public Sector

CTN :45210120

08 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of frp unequal angle moulding for mrvc coaches to j&t/mtn drg. no. misc. sk. no. 5290, alt-2. material and specification no. icf/md/spec-167a [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45277495

28 May, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

Central Government/Public Sector

CTN :45117408

26 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of equal angle moulding 40 x 40 x 5 mm x 2440 long as per icf noicf/md/ spec/167 a. (part of frp angle moulding). [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :45236853

25 May, 2026 2.65 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in leisure valley, sector 10 a, ward no. 2, chandigarh under mplads. ln/mp18047/2024-2025/116. - providing and fixing of chest press double complete in all respects having following specifications. size / dimensions length -1200 milimeter width- 700 milimeterheight 1800 milimeter maximum weight -120 kilogram material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometer warranty - 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars complete in all respects having following specifications.size/dimensions length- 900 millimeter height 800 millimeter material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the vertical or standing pipes shall be 40 mm nb with a thickness of 2.9 mm, and the horizontal pipes shall also be 40 mm nb with a thickness of 2.9 mm. the foundation pipe shall consist of a gi pipe anchored 500 mm deep and supported with a mild steel (ms) angle of 25 25 4 mm. the nominal bore of the foundation pipe shall be 40 mm nb with a thickness of 2.9 mm. the ms foundation plate shall have a minimum thickness of 12 mm. all nuts and bolts used for assembly shall be made of stainless steel to provide durability and resistance to corrosion. the open ends of all pipes, bearing bushes, and bases shall be fitted with fibre-reinforced plastic (frp) caps having a minimum thickness of 2 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance under outdoor conditions.colour:- paint finish- power coated, uv resistant paint coating thickness (min) 80 micrometer warranty - 3 years. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of three wheel shoulder builder/ arm wheel- outdoor gym equipment complete in all respects having following specifications. size / dimensions height of central pole from ground -1524 millimeter outside diameter of first wheel - 850 millimeter outside diameter of second wheel - 800 millimeter outside diameter of third wheel - 650 millimeter height of first wheel from ground - 1220 millimeter height of second wheel from ground - 1200 millimeter height of third wheel from ground - 1180 millimeter maximum weight -120 kilogram material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure quality

CTN :45101001

20 May, 2026 9.90 Lacs

Jodhpur - Rajasthan

Tender For providing and fixing of open gym equipments. - providing and installation of rower dimensions: - 1200mm (length) x 1000mm (width) x 920mm. (height) safe area: - 1.5 mtr x1.5 mtr. rower equipment made from c class g.i. pipe of different nb. nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame is of 80nb c class g.i. pipe welded with m.s. round plate of 250mm x 10mm. the handle frame 25nb is made from c class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class welded with m.s. round plate of 250 mm &10mmthick. main pipe supported with 25mm x 25mmm.s. angles of 3mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. to join the movement frame to main frame connecting links made up from 32 nb g.i. c class pipe. the seat fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mm x 2 mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. pins used of diameter 17mm are made up from sae 8620 bright material. the bearings used are of 6203zz permanent lubricated sealed bearing of reputed brand (skf/fag). high tensile steel with galvanized nuts and bolts are used for assembly. the p.u. bushes (stopper) used to avoid the collision. the circlips used for assembly is of a 16 the powder coating done with polyester powders from ackzonoble or berger paints with 60 to 70 micron thickness, single seated pullar-*dimesions: - 1900mm (length) x 740mm (width) x 1920mm (height).*safe aera: - 1.2mtr x 3mtr.*seated puller equipment made up of c class g.i. pipe of different nb. nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters.*make of g i pipe will be of tata, jindal, swastik, zenith or siddharth.*the center pipe is of 100nb made from c class g.i. pipe.*bottom support is of m.s. round plate of 0250mm & 10mm thickness is welded.*all linkages are made up of 25nb c class g.i. pipe.*the handle frame is of 32nb c class g.i. pipe.*the seat frame is of 32nb c class g.i. pipe.*to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush is used.*the foundation used for fixing is a structure and made from center pipe of g.i. of 80nb c class. welded with m.s. round plate of 0250mm & 10mm thick. main pipe supported with 25mm x 25mm m.s. angles of 3mm thickness and 20mm x 40mm crc square pipes of 3mm thickness.*foundation cover closing cap is made from frp material.*the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330mm x 300mm x 2mm thickness and form radius of 20 mm with no sharp edges.*closing caps are made up of high quality fiber reinforced plastic material.*pins used of diameter 25mm and 17mm are made up from sae 8620 bright material.*the bearings used are of 6205zz and 6203zz permanent lubricated sealed bearing of reputed brand (skf/fag).*high tensile steel with galvanized nuts & bolts are used for assembly.*the cerclips used of assembly are of a16.*the powder coating done with pure polyester powders of ackzonoble or berger paints with 60 to 70 micron thickness., providing & installation of parallel bar dimensions:-1870 mm (length) x 530 mm (width) x 2000 mm. (height). safearea: - 5.0 mtr x 2.5mtr. parallel bar equipment made from c class g.i. pipe of different nb. nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame made from 50 nb c class g.i. pipe. the handle frame is of 32nb made from c class g.i. pipe. the foundation used for fixing is25mmx25mmx3mmthickness l angle. closing caps are made up of high quality fiber reinforced plastic material. the powder coating done with polyester powders from ackzonoble or berger p aints with 60 to70 micron thickness., providing & fixing of cycle as per specifications as underarea - 1.8 x 0.8 mtr.safe area 2.8 x 1.8 mtr.height 1.10

corporations/Associations/Others

CTN :45151622

18 May, 2026 9.74 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of children play equipments, open air gym, in various parks in dhanas, chandigarh, under wdf - providing and fixing of swing ( 2 seater) 10 long 8 -6 high & 5 -0 wide made out of 2 m.s. pipe completed as per drg no. 02 job no. m-06 and to the entire satisfaction of engineer-in-charge, providing & fixing of wide slide ssarea : 3.9 m x 1.3 msafe play area : 4.9 m x 2.3 mplatform height : 1.2 mthe wide slide on of the attractive slides of its kind. the chute is made up of 14 swg ss/gi sheet. the stainless steel used is of 304 grades. the chute is supported by 40x5 ms angle. this chute is attached to the platform made from ss/g sheet. the platform is supported by 40 nb gi pipe. the ladder is made using 20 nb and 25 nb gi pipes. the steps for the ladder is made are of 20 nb gi pipes. the sliding height is 2.4m. the landing support used is made up of 25 nb pipe. the handrail of the chute is made up of 20nb power coated gi pipe. the slide is innovative wide slide on which at a time 3 kids can slide., providing & fixing of multi activity play system (ii) (maps ii):deck 3 ht. 1 deck 2.5 ht. 1 frp staircase 3 ht. 1 frp curve slide 3 ht. 1rainbow ladder 1 double swing 1 bubble pannel 1 steering 1area: 7mx5m safe area: 8mx6m 1. deck 3 height & 2.5 height - the deck of maps is made up of 4mm thickness fiberglass reinforced plastic. the top of the platform shall be made up of anti skid surface with multicolored pigment resign. all the attachments is through nylon clamps only. the size of platform is 1.6mx1.6m. 2. frp stairs case - the ladder shall be made up of the fiber reinforced plastic with a thickness of 4mm. it should have reinforcement to maintain strength and avoid bending. 3. frp curve slide- it is made up of 4mm thickness fiber reinforced plastic. 4. rainbow ladder- it is 5 long in height, the main frame of ladder is made up 20 nb g.i. pipe and risers are made up of 40 nb g.i. pipes. 5. double swing.-leg support in 40 nb g.i. pipe and top pipe is made up of 50 nb g.i. pipe seat is made up of 10 mm reinforced rubbers and g.i. pipe should be rubber coated and movement with nylon clamps at top. 6. bubble panel.-the railing is providing to all decks for safety and it is made up of lldpe. 7. steering wheel-it is made up of lldpe., providing and fixing of chest press double complete in all respects having following specifications. size / dimensions- length -1200 milimeter, width- 700 milimeter, height 1800 milimeter maximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions. colour:- green, paint finish- power coated, uv resistant, paint coating thickness (min) 100 micrometer, warranty - 3 years. co

corporations/Associations/Others

CTN :45151624

18 May, 2026 5.14 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing new children play equipments in various parks of sector 27 and 28 chandigarh under ward development fund. - providing and fixing of horizontal bridge ladder 10 long, high, 2 wide made of m.s.angle /pipe completed as per ca s drg.no.02 of job no.m-02., m.a.p.s.(jumbo 3 x 1)sr.no. description qty.1. standard see saw 01 no.2. double swing 01 no.3. wave slide 5 ht. 01 no.area : 4m x 4msafe area : 5m x 5m(jumbo 3 x 1 ) set consist of standard see saw:this items provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush type.double swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide: the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., multi activity play systemspecifications:-s.no. description qty.1 sq. deck 7 -0 h with canopy 12 sq. deck 5 -0 h with canopy 13 sq. deck 3 -0 h with canopy 14 sq. deck 4 -0 x 4 -0 with 3 -0 ht 15 straight inclined bridge 4 -0 long 16 swing bridge 8 -0 long 17 spiral slide 5 -0 ht 18 double wave slide 7 -0 ht. 19 cross stairs 5 -0 ht 110 ladder 7 -0 ht. 111 triangular stairs 3 ht. 112 split level ladder 113 double wave slide 3 -0 ht. 114. expansion ladder 7;-0 & 3 -0 2brief descriptions/sizes of different components of multiplay systems:-i. square deck of size 4 -0 x 4 -0 :- the size of sq. deck shall be 4 -0 x 4 -0 . the vertical supporting pipes shall be of minimum size 80 nb g.i. pipes or as required with nylon roof clamps attached to its. the horizontal supporting members shall be of m.s. angle of minimum size 40x40x5 mm or as required. the platform of the ladder shall be of aluminum chequred plate of minimum thickness 16 swg or as required. ii. canopy: - the canopy over square deck shall be made in two layers of fiber reinforced plastic with minimum thickness of 3 mm and the same shall be supported on structural framework of m.s. square pipe. the layers of iso gel coat shall be applied over canopy and two extra layers on the flange. the colour, design and finish of the outer surface of the canopy shall be as approved by engineer-in-charge.iii. double wave slide 3 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. the layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame of the slide shall be made from g.i. pipe of minimum size 25 nbv. the pipes shall be powder coatediv. double wave slide 7 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame shall be made from g.i. pipe of minimum size 25 nb. the pipes shall be powder coated. additional h type support shall be provided in the center.v. spiral slide 5 -0 :- the spiral slide chute shall be made of frp having minimum shell thickness of 4 mm and the same shall be supported on center support of g.i. pipe having minimum size of 80 nb. the backside of the slide surface shall be mat. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the landing module shall be supported on gi pipe of minimum size 20 nb powder c

corporations/Associations/Others

CTN :45111401

14 May, 2026 5.14 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing new children play equipments in various parks of sector 27 and 28 chandigarh under ward development fund. - providing and fixing of horizontal bridge ladder 10 long, high, 2 wide made of m.s.angle /pipe completed as per ca s drg.no.02 of job no.m-02., m.a.p.s.(jumbo 3 x 1)sr.no. description qty.1. standard see saw 01 no.2. double swing 01 no.3. wave slide 5 ht. 01 no.area : 4m x 4msafe area : 5m x 5m(jumbo 3 x 1 ) set consist of standard see saw:this items provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush type.double swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide: the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., multi activity play systemspecifications:-s.no. description qty.1 sq. deck 7 -0 h with canopy 12 sq. deck 5 -0 h with canopy 13 sq. deck 3 -0 h with canopy 14 sq. deck 4 -0 x 4 -0 with 3 -0 ht 15 straight inclined bridge 4 -0 long 16 swing bridge 8 -0 long 17 spiral slide 5 -0 ht 18 double wave slide 7 -0 ht. 19 cross stairs 5 -0 ht 110 ladder 7 -0 ht. 111 triangular stairs 3 ht. 112 split level ladder 113 double wave slide 3 -0 ht. 114. expansion ladder 7;-0 & 3 -0 2brief descriptions/sizes of different components of multiplay systems:-i. square deck of size 4 -0 x 4 -0 :- the size of sq. deck shall be 4 -0 x 4 -0 . the vertical supporting pipes shall be of minimum size 80 nb g.i. pipes or as required with nylon roof clamps attached to its. the horizontal supporting members shall be of m.s. angle of minimum size 40x40x5 mm or as required. the platform of the ladder shall be of aluminum chequred plate of minimum thickness 16 swg or as required. ii. canopy: - the canopy over square deck shall be made in two layers of fiber reinforced plastic with minimum thickness of 3 mm and the same shall be supported on structural framework of m.s. square pipe. the layers of iso gel coat shall be applied over canopy and two extra layers on the flange. the colour, design and finish of the outer surface of the canopy shall be as approved by engineer-in-charge.iii. double wave slide 3 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. the layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame of the slide shall be made from g.i. pipe of minimum size 25 nbv. the pipes shall be powder coatediv. double wave slide 7 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame shall be made from g.i. pipe of minimum size 25 nb. the pipes shall be powder coated. additional h type support shall be provided in the center.v. spiral slide 5 -0 :- the spiral slide chute shall be made of frp having minimum shell thickness of 4 mm and the same shall be supported on center support of g.i. pipe having minimum size of 80 nb. the backside of the slide surface shall be mat. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the landing module shall be supported on gi pipe of minimum size 20 nb powder c

Frp Dome Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors