Latest frp material Tenders | Government frp material Tenders

CTN :45305833

08 Jun, 2026 35.94 Lacs

Faridabad - Haryana

Tender For beautification works in including play equipment, open gym, plantation and repairing of boundary wall at brahampuri park saran village boosting park in ward no. 09 nit faridabad.(recall) - labour charge for making tee connection with existing line excavation, cutting jointing and making connection with existing line complete in all respect, supply and fixing of pvc tee 150x150x150mm dia., chain swing (2seater): 10 l x 6 w x 8 .5 h. horizontal frame and vertical legs is of m.s. pipe 2 x 12 gauge. it stays with m.s. pipe 1 x 12 gauge. swinging seats-2nos is of frp molded seat of 2mm thick fitted with m.s. pipe frame x 12 gauge which hang with m.s. chain 6mm thick duly plated with ball bearing and m.s. flat 6mm thick housing. complete with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division) in multi colors item with gst, transportation, installation with c.c and amp: labor at site., sea saw (4seater): - 8 l x 5 .5w x 15 high. frame is of m.s. pipe 2 x 12 gauge. sitting planks is of m.s. pipe 2 x 12 gauge and its cantilever and handles is of m.s. pipe x 12 gauge. sitting seats 4 nos. is of molded frp material in 3mm thick with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division). complete item with gst, transportation, installation with c.c and labor at site., bridge ladder: 10 l x 2 w x 6 h. horizontal ladder is of m.s. pipe 2 , andamp: vertical ladder is of same material of 12-gauge isi mark with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division). complete item with gst, transportation, installation with c.c and amp: labor at site., merry-go-round (4-seater): 5 dia. main frame is of m.s. sq. pipe 2 x 2 x 14 g and having suitable handle andamp: foot-rest is of round pipe x 12 gauge. central pipe is of m.s. pipe 3 x 12 g with heavy duty shaft 50mm thick andamp: ball bearing assembly. it consists of 4no chair made of molded frp plastic. complete with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division) in multi colors item with gst, transportation, installation with c.c and amp: labor at site., pvc reducer 150mm x 100mm.., frp dustbin (tilting type) of capacity 60 ltr. body is made of moulded fiberglass re-enforced plastic (non- halogen fire retardant resign) of 2mm thick having its lid with handle. it fitted with m.s. square pipe 1.25` x 1.25` x 14 gauge and m.s. flat 50 x 5mm, 30x 5mm base structure with epoxy primer interseal 670 hs and pu finish (interthane 990) paints. complete item with gst. transportation, installation with cc and labor at site., making connection with existing sewer main line, p/f of pvc 100mm dia bend., supply of pvc pipe 150 mm dia with isi mark 8kg.cm2 pressure, supply of good earth complete as per site requirement, p/f chest press is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi-pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from roto-moulde. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used., p/f seated puller is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 50mm and 25mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used, p/f sky walker is made from is-1239 b class

Central Government / Public Sector

CTN :45092121

28 May, 2026 NA

Medchal-T - Telangana

Tender For supply and provision of loco cab doors with logbook and water bottle holder in frp material as per drawing no: c/els/lgd/bf/4/69. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45091921

26 May, 2026 NA

Vadodara - Gujarat

Tender For supply of emergency socket box of frp material as per rdso spec no. rdso/spn/tc/44/02 ver.2.0with latest amendment. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45226904

08 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of condenser fan blade suitable for 1400 rpm motor made from frp material with aluminium hub overall unit dia 580mm, hub dia 170mm, bore dia on hub for motor shaft of 19mm with 6mm keyway, dynamically balanced and confirming to part no. 8.35.7. of rdso specn. no. rdso/pe/spec/ac/0061-2005 (rev-1). item to be supplied with oem test certificate as per rdso specn. make-multiwing, everfine,hascon or any other rdso approved make. [ warranty period: 30 months after the date of delivery ] ]

CTN :45101001

20 May, 2026 9.90 Lacs

Jodhpur - Rajasthan

Tender For providing and fixing of open gym equipments. - providing and installation of rower dimensions: - 1200mm (length) x 1000mm (width) x 920mm. (height) safe area: - 1.5 mtr x1.5 mtr. rower equipment made from c class g.i. pipe of different nb. nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame is of 80nb c class g.i. pipe welded with m.s. round plate of 250mm x 10mm. the handle frame 25nb is made from c class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class welded with m.s. round plate of 250 mm &10mmthick. main pipe supported with 25mm x 25mmm.s. angles of 3mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. to join the movement frame to main frame connecting links made up from 32 nb g.i. c class pipe. the seat fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mm x 2 mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. pins used of diameter 17mm are made up from sae 8620 bright material. the bearings used are of 6203zz permanent lubricated sealed bearing of reputed brand (skf/fag). high tensile steel with galvanized nuts and bolts are used for assembly. the p.u. bushes (stopper) used to avoid the collision. the circlips used for assembly is of a 16 the powder coating done with polyester powders from ackzonoble or berger paints with 60 to 70 micron thickness, single seated pullar-*dimesions: - 1900mm (length) x 740mm (width) x 1920mm (height).*safe aera: - 1.2mtr x 3mtr.*seated puller equipment made up of c class g.i. pipe of different nb. nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters.*make of g i pipe will be of tata, jindal, swastik, zenith or siddharth.*the center pipe is of 100nb made from c class g.i. pipe.*bottom support is of m.s. round plate of 0250mm & 10mm thickness is welded.*all linkages are made up of 25nb c class g.i. pipe.*the handle frame is of 32nb c class g.i. pipe.*the seat frame is of 32nb c class g.i. pipe.*to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush is used.*the foundation used for fixing is a structure and made from center pipe of g.i. of 80nb c class. welded with m.s. round plate of 0250mm & 10mm thick. main pipe supported with 25mm x 25mm m.s. angles of 3mm thickness and 20mm x 40mm crc square pipes of 3mm thickness.*foundation cover closing cap is made from frp material.*the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330mm x 300mm x 2mm thickness and form radius of 20 mm with no sharp edges.*closing caps are made up of high quality fiber reinforced plastic material.*pins used of diameter 25mm and 17mm are made up from sae 8620 bright material.*the bearings used are of 6205zz and 6203zz permanent lubricated sealed bearing of reputed brand (skf/fag).*high tensile steel with galvanized nuts & bolts are used for assembly.*the cerclips used of assembly are of a16.*the powder coating done with pure polyester powders of ackzonoble or berger paints with 60 to 70 micron thickness., providing & installation of parallel bar dimensions:-1870 mm (length) x 530 mm (width) x 2000 mm. (height). safearea: - 5.0 mtr x 2.5mtr. parallel bar equipment made from c class g.i. pipe of different nb. nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame made from 50 nb c class g.i. pipe. the handle frame is of 32nb made from c class g.i. pipe. the foundation used for fixing is25mmx25mmx3mmthickness l angle. closing caps are made up of high quality fiber reinforced plastic material. the powder coating done with polyester powders from ackzonoble or berger p aints with 60 to70 micron thickness., providing & fixing of cycle as per specifications as underarea - 1.8 x 0.8 mtr.safe area 2.8 x 1.8 mtr.height 1.10

Central Government/Public Sector

CTN :45154893

22 May, 2026 NA

Hoshangabad - Madhya Pradesh

Tender For supply of fip cover for alco engine made of frp material to rdso specification no.mp.1.14.02.01 rev.01 jan 2004 and modification sheet no. mp.mod.en %u2013 06.24.09 & dimensionally confirm to dlw part no.10051820, weight frp cover should be 3.8 to 4 kgs. [ warranty period: 30 months after the date of delivery ]

Corporations/Associations/Others

CTN :45052277

07 May, 2026 NA

Nagpur - Maharashtra

Tender For sculpture supplying and fixing sculpture in frp material of minimum 5 mm thickness with m.s. frame square pipe with dico primer and dico color of according to favorable condition

Central Government/Public Sector

CTN :45049743

19 May, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of condenser fan blade suitable for 1400 rpm motor, made from frp material with aluminum hub, overall unit dia 580 mm, hub dia 170 mm, bore dia on hub for motor shaft of 19 mm with 6 mm keyway, dynamically balanced and confirming to para no. 8.35.7 of rdso specification no. rdso / pe / spec / ac /0061 - 2005 (rev.1). to be supplied with oem test certificate as per specification. make acceptable: multiwing / everfine / hascon or any other rdso approved make. oem or authorised dealers only to quote with documentary evidence. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44747800

12 May, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply and installation of roof ceiling arrangement for lwfcwac coach as per drg no:wa44151 alt-nil.frp material should confirm to specn. mdts-133, rev-05. please visit icf vendor portal for downloading drawing https://vp.icf.gov.in/vendtendordetnew.php using key: 0725d9ojjxn3582 [ warranty period: 72 months after the date of delivery ]

Central Government/Public Sector

CTN :44996245

12 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply and installation of roof ceiling arrangement for lwfcwac coach as per drg no:wa44151 alt-nil.frp material should confirm to specn. mdts-133, rev-05. please visit icf vendor portal for downloading drawing https://vp.icf.gov.in/vendtendordetnew.php using key: 0725d9ojjxn3582 [ warranty period: 72 months after the date of delivery ]

Frp Material Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors