Latest frp shed Tenders | Government frp shed Tenders

State Government

CTN :45311776

01 Jun, 2026 14.05 Lacs

Faridabad - Haryana

Tender For a/mtc. of water works sector-21c, faridabad. dismantling and construction of boundary, rcc, steel work, snowcem etc. in and all other works contingent thereto.

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

State Government

CTN :45286460

29 May, 2026 NA

Gondia - Maharashtra

Tender For supply of material fro gp mundipar ishawar - list of material, metal 80 mm with royalti, metal 40 mm with royalti, metal 20 mm with royalti, bajri 10 mm with royalti, sand with royalti, cement 53 grade isi mark, steel isi mark 6 mm, steel isi mark 8 mm, steel isi mark 10 mm, steel isi mark 12 mm, steel isi mark 16 mm, soil bricks std size, fly ash/cement bricks, supply of soft murum with royalti, supply of soil with royalti, carting of murum, carting of soil /excavated waste, concrete mixture, excavator backaloader (jcb/hyundai/cat/mahindra etc), static roller, water tanker, centering rent, ventilator, grill works, vetrified tiles, oil paint, birla white, water base paint, pvc pipe 75 mm class 2, pvc pipe 90 mm class 2, pvc pipe 110 mm class 2, pvc pipe 140 mm class 2, pvc t and bend 75 mm, pvc t and bend 90 mm, pvc t and bend 110 mm, pvc t and bend 140 mm, toilet sheet traditional, centering wire and nails, steel door, steel windows, water meter with installation and fitting complete, rcc pipe 1000 mm with collars, rcc pipe 800 mm with collars, rcc pipe 600 mm with collars, rcc pipe 450 mm with collars, rcc pipe 300 mm with collars, air valve 50 mm, air valve 110 mm, air valve 140 and 130 mm, sluice valve 65 mm, sluice valve 50 mm, sluice valve 140 mm, led lamp 100 watt, led lamp 80 watt, led lamp 60 watt, led lamp 36 watt, led lamp 23 watt, led lamp 14 watt, led lamp 8 watt, information board, steel sheet 12*4, cement sheet 12*4, steel pipe (borewell size), nut bolt, fiber door, paving block 60 mm, paving block 80 mm, electric holder, auto switch, relay, bitumen 190 kg drum, checker tiles, 100 w flood light

State Government

CTN :45288316

29 May, 2026 NA

Gondia - Maharashtra

Tender For supply of material fro gp chichtola - list of material, metal 80 mm with royalti, metal 40 mm with royalti, metal 20 mm with royalti, churi 10 mm with royalti, sand with royalti, cement 53 grade isi mark ultratech, steel isi mark 6 mm, steel isi mark 8 mm, steel isi mark 10 mm, steel isi mark 12 mm, steel isi mark 16 mm, soil bricks std size, fly ash/cement bricks, supply of soft murum with royalti, supply of soil, tractor carting rent, carting of waste material, concrete mixture, excavator, static roller, water tanker, centering, ventilator, grill works, vetrified tiles, oil paint, birla white, distemper, pvc pipe 75 mm class 2, pvc pipe 90 mm class 2, pvc pipe 110 mm class 2, pvc pipe 140 mm class 2, pvc t and bend 75 mm, pvc t and bend 90 mm, paving block 60 mm, paving block 80 mm, toilet sheet traditional, centering wire and nails, steel door, steel windows, water pump, rcc pipe 1000 mm with collars, rcc pipe 800 mm with collars, rcc pipe 600 mm with collars, rcc pipe 450 mm with collars, rcc pipe 300 mm with collars, gi pipe 100 mm, gi socket 100 mm, gi pipe 150 mm, gi socket 150 mm, pvc socket 75 mm, pvc socket 90 mm, pvc socket 110 mm, pvc socket 140 mm, pvc t 40 mm, pvc socket 40 mm, pvc end cap 40 mm, pvc end cap 75 mm, pvc end cap 90 mm, pvc end cap 110 mm, pvc end cap 140 mm, air valve 50 mm, air valve 110 mm, air valve 140 and 130 mm, sluice valve 65 mm, sluice valve 50 mm, sluice valve 140 mm, 4 mm service wire, copper wire bunddle 1:18, holder, led light 25 watt, led light 20 watt, led light 14 watt, led light 12 watt, information board, steel sheet 12*4, cement sheet 12*4, cfl light 25 watts, cfl light 20 watts, fiber door, fencing wire, electric holder, auto switch, relay, bitumen 190 kg drum, checker tiles, water meter with installation and fitting complete, cement sitting chair, septic tank plastic, septic tank steel, solar lantern, toilet sheet kamod type, primer, ro + freezer complete set 1, solar pump 1 hp, solar pump 3 hp, solar panel, submercible pump 1hp, submercible pump 3hp, plastic slate for anganwadi childrens, compound wall net, steel angle, wooden door frame 3.5x7 ft, carpet, basin, steel cupboard, ceiling fan, capacitor, control panel, steel box, plywood sheet, copper wire bunddle 1:18, led /cfl light body cover, hand pump pipe g.i, hand pump pipe pvc, hand pump rod, hp bush, hp nut bolt, hp body cover, hp chain, hand pump bearing, hand pump chain, gate steel, asbestos sheet, 100 w flood light

State Government

CTN :45314454

02 Jun, 2026 8.47 Lacs

Ernakulam - Kerala

Tender For the scope of the work includes aluminum works steel works pairing and replacement of existing broken windows blinds for windows and cloth curtain for conference hall repainting works of entire building

State Government

CTN :45305483

15 Jun, 2026 NA

Gandhinagar - Gujarat

Tender For supply of various types of tools & tackles and miscellaneous items for day to day maintenance works for tmd-ii gtps. - fevi kwik tube 3 grams, anabond rtv silicone 666, packing : 100 gms. for gasket sealing, metal cutting wheel (for stainless steel) size 105 x 1.2 x 16 mm., grinding disc (wheel) size 100x4x16 mm, mos 13750 high cut (a.36) ., mini angle grinder 100 mm, rust removing spray wd-40 in aersole packing of high pressure valves ., pipe vice no.6 size 12 mm to 150 mm, bench vice apex make -150 mm (6"), bench vice apex make -200 mm (8"), gi nipple 15 mmx4 long for civil work, gi nipple 1/2" x 2" long for civil work, gi nipple 1/2" x 3" long for civil work, washing powder ( 1 kg pack ), instametal (0.5 kg/pack), grinding stone (smooth) for 6"(dia.) bench grinder wolf., grinding stone (rough) for 6" bench grinder wolf, pipe wrench size 18" (450 mm) length, heavy duty pipe wrench size:24", heavy duty pipe wrench, length -200 mm, least max opening-33 mm, taparia product no- hpw 08, heavy duty pipe wrench, length -250 mm, least max opening-48 mm, taparia product no- hpw 10, white welding glass size 3.1/4"x4.1/4", atharmal (gremany) make dark green welding glass size:4 1/4x3 1/4 shed 11a 1 din, two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, welding electrode holder fully insulated 600 amp. current (hc 600) , make-esab., esab earthing clamp, cutogen-5 cutting blow pipe (cutting torch), esab/iol make gas heating torch, oxygen gas hose pipe blue 08 mm, make esab/dura., acetylene gas hose pipe red 08 mm, make esab/dura, cutting nozzle size 1/16", cutting nozzle size 3/64", needle file set jk make, taparia chisel 10" long, taparia flat chiesel 1046 150 mm length, hole punch set having 4 to 32 mm dia size, araldite 180 gram/tube, nylon braided pvc hose pipe suitable air/water handling ;at working pressure of 10kg/cm2 size-20mm, nylon braided pvc hose pipe suitable air/water handling ;at working pressure of 10kg/cm2 ,size; 12mm, nylon braided pvc hose pipe suitable air/water handling ;at working pressure of 15kg/cm2 ,size; 25mm id.

Central Government/Public Sector

CTN :45308856

15 Jun, 2026 40.00 Lacs

Kamega - Arunachal Pradesh

Tender For miscellaneous b/r repair works for upgradation of water supply installation, tanks, steel/rcc staging shed of age b/r under ge tenga

Central Government/Public Sector

CTN :45306043

13 Jun, 2026 40.00 Lacs

Jammu - Jammu And Kashmir

Tender For maintenance of day to day complaints of water supply including connected items at various loc under ge nagrota - m&l for repair/rectification of leakage to water supply distribution lines 15 mm dia to 25 mm dia gi tubing by necessary excavation, returning/filling as required, tightening of loose joints of union, elbow, socket etc, threading if required including replacement of gi union/socket/nipple as required complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 40 mm dia to 50 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 80 mm to 150 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing /di /ci /ms of 150 mm dia to 300 mm dia complete all as specified and directed. note : (i) the complaints for the above works shall be registered by contractor at the water supply complaint cell of age e/m (ii) stationary required such as complaint book, job cards etc shall be arranged by the contractor and proper record shall be maintained by the contractor.(iii) tools ,plumber with helper and transport with driver for attending of above complaints shall be arranged by contractor. (iv) the rate quoted by the contractor for above jobs under item no 1 to 4 shall be inclusive of cost of works under note (i) to (iii) above. (v) the said complaints shall be rectified within 12 hrs of the registration of the complaints failing which recovery of rs.500/commplaint shall be made for contractors due payment (vi) the stores/item required for the works under item no 1to 4 shall be measured separately under relevant item as supply only. (vii) excavation, returning/ filling shall be measured and paid for separately and material required for the works above shall be included to quoted rates., excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep including getting out in hard/dense soil complete all as specified and directed., returning /filling including watering , leveling , spreading and well ramming in layers not exceeding 25cm thick complete all as specified and directed., removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 50 metre above the starting point complete all as specified and directed., refixing/relaying of old retrieved steel tubing in new or old position with and including new gi fittings (connections) and as per site requiremen laid in trenches, above ground level or in any position of following sizes as under complete all as specified and directed : -, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, taking down unserviceable gi tubing / upvc tubing from any position complete with all fittings & connections from any position of following sizes as under complete all as specified and directed :-, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and fixing/laying & testing of galvanised steel water tubing, medium grade, isi marked complete with all new galvanized fittings of following sizes laid in trenches/ above ground level or in any position complete all as specified and directed :, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and laying upvc pipe tubings medium grade pressure rating 10 kgf/cm2 isi mark with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete laid in trenches or in any other position of following sizes as under complete all as specified and directed , 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply only gi fittings, medium grade, isi marked of following sizes as under complete all as specified and directed :-, union 15 mm dia, union 20mm dia, union 25mm dia, union 32mm dia, union 40mm dia, union 50mm dia, socket 15 mm dia, socket 20 mm dia, socket 25 mm dia, socket 40 mm dia, socket 50 mm dia, reducer socket 40mmx50mm, reducer socket 15mmx20mm, reducer socket 20mmx25mm, elbow 15mm dia, elbow 20mm dia, elbow 25mm

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

CTN :44665295

01 Jun, 2026 2.23 Crore

Vadodara - Gujarat

Tender For corrigendum : supplying and applying vermiculite cementitious fire proof coating on structural steel in connection with civil structural and underground piping works

Frp Shed Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors