Get complete information related to latest Frp Shutter Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Frp Shutter Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Frp Shutter Tenders.
Tender For general-eranholi - valiyathodu-providing frpshutter to valiya thodu cross bar and constructing dr retaining wall at upstream side of kaaliyil-thottummal road culvert in ward no 18 of eranholi panchayath,kannur dt
Tender For fixation of local market rate of material items for implementation of mgnrega schemes under rampurhat ll development block - technician, helper (technician), coolie, carriage of tar bitumen, carriage of stone aggregate below 40 mm nominal size, carriage of steam coal, carriage of stone aggregate 40 mm nominal size and above, 1st class picked jhama bricks(traditional), carriage of soling stone & masonry stone, coloured inter locking c.c. paver block, fine sand, silver sand, 1st class traditional bricks (kiln burnt), coarse sand, fly ash bricks(traditional), modular fly ash bricks, modular clay bricks, stone aggregate(single size): 40 mm nominal size, medium sand, water proofing materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, surface vibrator, water tanker 5000 ltr. capacity, carriage of r.c.c. pipes 600,700,750 & 800 mm dia, carriage of r.c.c. pipes 900 mm dia, carriage of r.c.c. pipes 1000 mm dia, carriage of r.c.c. pipes 1200 mm dia, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), welding by electric plant, brick aggregate (single size):40 mm nominal size, moorum, carriage of carriage of moorum, stone aggregate(single size):63 mm nominal size, river bed material, fitter(grade1), brick aggregate (single size):50 mm nominal size, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), nylon net, paddy straw, g i wire, stone boulder ( 225mm-150mm ), stone boulder( 225 mm above ), laterite boulder, carriage of cost of neelgiri/maxican grass truf sqm, wood dust, sal silliguri, sal malaysia, neem wood, other local wood, ordinary teak wood, sisu/gamar wood, local sal wood, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), bright finished or black enamelled mild steel screws 40 mm, bright finished or black enamelled mild steel screws 20 mm, bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm, bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm, bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm, hydraulic door closer tubular type aluminium section body, brass 150 mm floor door stopper (0.357 kg), anodised aluminium hanging type door stopper, malayasia sal cleat, chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, frp composite door frame 66mm x 90mm, frp composite door frame 66mm x 70mm, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, supplying solid flush type doors of commercial quality, white cement, coal tar, carriage of steel, r.c.c ventilator of 20 mm. thick upto 0.10 sq.m. area, r.c.c ventilator of 20 mm. thick above 0.10 sq.m. area, fan hook, chlorinated polyvinyl - chloride (cpvc) pipe 15 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 20 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 32 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 40 mm outer dia,
Tender For general-eranholi- kolaprath thodu providing frpshutters and dr protection to u/s side of kolaprath thazhe thodu cross bar in ward 2 of eranholi panchayath, kannur district.-general civil work
Tender For general-eranholi - valiyathodu-providing frpshutter to valiya thodu cross bar and constructing dr retaining wall at upstream side of kaaliyil-thottummal road culvert in ward no 18 of eranholi panchayath,kannur dt
Tender For rki imprved infrastrtral facilities in thrissur ponnani kole lands p3 imprvemnts to ettumuna ,parupadam ,herbert link canal chenathu kole deepening of inner chals, enginethara 1 ramp 3 frpshutters mechanical 5 pettichal intsr
Tender For tender for supply of main column of rhs 122x61x3.6 mm (9.67 kgsperrm) , 3.0m length each conforming to is 4923.2017 , truss the principle rafter and the bottom chord shall be fabricated out of rectangular steel hollow sections of size 96mm x 48 mmx 3.6 mm (8.00 kg per rm) with 1 by 2 slopes. all other strut members will be fabricated out of rectangular steel hollow sections of size 66mm x 33 mm x 3.2 mm (4.07 kg per rm). conforming to is 4923.2017 , side runner made of shs 45x45x2.6mm thick having two pales at both ends 45x90x6mm with two holes of dia 12mm welded on either ends between column to column for fixing u chanel for pir panels , purlin will be fabricated out of rectangular steel hollow sections of size 80mm x 40 mm x 3.6 mm (6.40 kgperrm) with cleats welded at both the ends conforming to is 4923.2017 , extention purlin shall be of 450mm long fabricated out of rectangular steel hollow sections of size 80mm x 40 mm x 3.6 mm (6.40 kgperrm) with cleats welded at both the ends conforming to is 4923.2017 , sun shade frame with sheet- sunshades shall be made out of 0.50 mm thick camouflage pattern colour coated steel sheet conforming to is 14246-2024 (or is 277-2018 reaffirmed 2022 for base galvanized sheet) fixed with angle iron frame of isa 40 x 40 x 5 mm (3.0 kgperrm) conforming to is 808-2021. , roofing sheets - 0.50 mm thick ppgi camouflage pattern (is 14246-2013) of size 3000x1060mmx0.50mm zinc coating 120 gsm (is 277-2018). self-drilling hex washer head fasteners (hot-dip zinc). , false ceiling supporting angle - ms 65x65x5 mm for placing of puf 40mm thick length - 4180mm , false ceiling supporting l-section of 50 x 50 x 5mm thick (3.80 kgperrm) fixed appropriately to the truss for placing of puf 40mm thick length - 3000mm , wall puff panel of size (1000 (w) x 3000 (ht) , 40 mm 0.50 mm colour-coated gi both sides , camouflage ext per off white , tongue & groove interlocking , conforming to is 16203- 2016 , partition wall puff panel of size (1000 (w) x 3000 (ht) , 40 mm 0.50 mm colour-coated gi both sides , bothside off white colour (intperext) , tongue & groove interlocking , conforming to is 16203- 2016 , puff panel for ceiling portion of size (1000 (w) x 3000 (ht) , 40 mm 0.50 mm colour-coated gi both sides , bothside off white colour (intperext) , tongue & groove interlocking , conforming to is 16203- 2016 , main external door - size 1000x2100 mm (01 no) 2 mm thick aluminium frame (is 1948-2024). shutter- 40 mm puf (0.50 mm ppgi both sides , . fittings- 4 nos magnetic hinges (100 mm hd) , 2 al sliding bolts (300 mm) , al tower bolt (200 mm) , 2 d-handles , 1 helical door spring , door closer (is 208-1996) , padlock + 2 spare keys. canopy 1300x450 mm with isa 35x35x3 mm frame. , internal doors - size 750x2100 mm (06 nos) 2 mm thick aluminium frame (is 1948-2024). shutter- 40 mm puf (0.50 mm ppgi both sides. fittings per door- 4 magnetic hinges (100 mm hd) , 1 al sliding bolt (300 mm) , al tower bolt (200 mm) , 2 d-type handles (150 mm). , fixed upvc window - 1000x450 mm (01 no) installed at ht 2.1 m from ffl. upvc frame & shutter thick (is 17953-2023). double glazed- 5 mm + 10 mm air + 5 mm toughened safety glass (is 2553 pt 1-2018). fixed gi wire mesh 18-20 g , (is 4948-2002). anodised aluminium grill on outer side (is 733-1983). rubberperneoprene packing for weather tightness. , ventilators with exhaust fan - 250 mm sweep (06 nos) 4 nos in toilet cubicles + 2 nos in bathroom cubicles. upvc frame 2 mm thick (is 17953-2023). shutter- 4 mm frostedperpinhead dg upvc fibre glass , drop-flap type , opens internally. fittings- hinges , eye hooks , tower bolt 100 mm (is 15833-2009). fly-proofing- ss wire mesh aperture on upvc outer frame. exhaust fan 200 mm with louver pre-cut at factory. , inner corner flashing 50x50x3000mm , 0.5mm thick , bird cover flashing 50x250x3000mm , 0.5mm thick , outer corner 3100mm x 200mm x 200mm , ridge cover 2400mm x 300x300mm , top & bottom u flashing 40x40x65x1.5mm thi
Tender For supply of 02 x store shelter with all etc completed c c - mm 0 point 63 mm , pre coated galvanized plain steel sheet gi based of 600mm x 2460 mm 0 point 50mm , sunshade made of will be of pre painted galvalume aluminium zinc coating gi based plain steel sheet 0 point 63 mm , self driven power screw of 3mm in dia and 55mm long in built rubber washer and gi washer , pre painted steel doors of size 1 point 50 x 2 point 10m double leaf with angle iron frame 40x40x6mm with two cleats welded to the frame as door , pre painted steel window made out of 1 point 25 mm thick pressed steel frame as per drg, outer shutter of 4 mm , s for wind driven turbine air ventilator of 21inch dia made up of stainless steel , building metrial for fly ash oblique burnt clay bricks of size 230mm x 115mm x 75mm. bricks shall have crushing strength of not less than 75 kg , building metrial for cement bags opc 43 grade conforming to is8112 to 1989 packed in hdpe bag of 50 kg , building metrial for coarse sand conforming to is 383 1970 the sand shall be hard dense strong durable , building metrial for fine sand continue to see specification as per appendix , building metrial for graded stone aggregate of size 40 to 63mm continue to see specification as per appendix , building metrial for graded stone aggregate of size 40mm continue to see specification as per appendix , building metrial for graded stone aggregate of size 20mm continue to see specification as per appendix , building metrial for graded stone aggregate of size 12 point 5 mm continue to see specification as per appendix , hardware material for thinner continue to see specification as per appendix , hardware material for water proofing compound continue to see specification as per appendix , hardware material for plastic dividing strips of 38 mm wide and 1 point 5mm thick continue to see specification as per appendix , hardware material for red oxide zinc chromate continue to see specification as per appendix , hardware material for synthetic enamel paint continue to see specification as per appendix , hardware material for curtain rod of 20mm dia with 2 brackets and 12 nos of curtain rings compete for 1 point 50 mtr long with screws for fixing the brackets , hardware material for fire extinguisher 5 kg capacity with mounting brackets , electric material for led tube rod 4 feet x 20 w continue to see specification as per appendix , electric material for ceiling fan 1200mm sweep complete with electronic dimmer 450w , electric material for hook for hanging of ceiling fan , electric material for bulk head fitting complete with glass and led light 9 watt , electric material for ceiling rose 2 to 3 terminal , electric material for switch piano type 5 amps , electric material for 5 pin 15 amps switch socket combination with pvc mounting box , electric material for 5 pin 5 amps switch socket combination with pvc mounting box , electric material for mcb db spn 12 way , electric material for mcb dp 32 amps continue to see specification as per appendix , electric material for miniature circuit breaker mcb 6 amp to 32 amps , electric material for pvc switch mounting box 6inch x 8inch , electric material for exhaust fan 450mm with louvers , electric material for wire pvc insulated cable 1point 5sqmm multistranded copper conductor single core 1100v continue to see specification as per appendix , electric material for wire pvc insulated cable 2 point 5sqmm multistranded copper conductor single core 1100v continue to see specification as per appendix , electric material for cable pvc insulated aluminium solid conducter served with an inner sheathing of pvc tape armoured , electric material for pvc casing capping 20 mm size , electric material for pvc casing capping 25 mm size , electric material for 20mm dia pvc conduit pipe med grade , electric material for pvc tee //bid details 2 / 68 conduit pipe med grade , electric material for pvc tee 20mm casing capping , electric material for pvc tee 25mm casing cappin
Tender For local market rate for construction items materials of labpur dev. block jurisdiction of fy-2026-27 (including all taxes). - laying and jointing pvc pipe. heading, welding by electric plant, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, 1st class picked jhama bricks(traditional), 1st class traditional bricks (kiln burnt), modular fly ash bricks, fly ash bricks(traditional), coloured inter locking c.c. paver block, moorum, fine sand, medium sand, coarse sand, coarse sand, portland cement, white cement, water proofing materials, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, stone screening type a (13.2 mm), stone screening type b (11.2mm), stone boulder( 225 mm above ), stone boulder ( 225mm-150mm ), grade 1 stone metal 63 mm to 45 mm, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, 18 mm thick marble partition slab for urinals including fitting fixing (with chawk doongri marble), ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, bitumen vg-30, bitumen emulsion, coal tar, diesel oil, sal silliguri -in/c labour cost, sal malaysia-in/c labour cost, neem wood -in/c labour cost, other local wood -in/c labour cost, ordinary teak wood -in/c labour cost, sisu/gamar wood -in/c labour cost, local sal wood -in/c labour cost, bamboo (8cm-10cm dia) including fixing, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sal bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), malayasia sal cleat, wood dust, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, supplying solid flush type doors of commercial quality, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, anodised aluminium hanging type door stopper, brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, ms integrated grill for steel window and ventillator, two point nose steel handle, openable steel windows as per is sizes with side hung shutters and horizotal glazing bars., top hung side hung ventillator, fixed type ventilators as per i.s. sizes with horizontal glazing bars h