Latest frp window frame Tenders | Government frp window frame Tenders

Central Government / Public Sector

CTN :43246742

12 Jan, 2026 NA

Secunderabad - Telangana

Tender For supply of frp cleats suitable for 4.5 kw alternator [item no.3,4,5,6,7 and 8] material and specification conforming to rdso drg.no.rdso/pe/sk/tl/4508-2009 rev.1 or any latest issued by rdso

Central Government/Public Sector

CTN :43158907

26 Dec, 2025 NA

Sonbhadra - Uttar Pradesh

Tender For providing of custom bid for services - 200143877 supply of material and its application for frp lining of alkali preparation tank at sstps dm plant stage 1, ntpc singrauli

Central Government / Public Sector

CTN :43197609

06 Jan, 2026 NA

Ratnagiri - Maharashtra

Tender For supply of automatic light controlling nature switch device grade sensors and advanced micro controllers with suitable power contactor and mcb, enclosed in a a frp enclosure for pole mounting, confirming to is-54 and similar to swadep-02 ec-03 kw 1phase.the device should have the following specifications. (1) voltage range: 120v, ac 50hz. (2) switching endurance 5000 cycles of on and off minimum. (3) operating illumination levels (a) for switching on-less than 60 lux for 30 seconds. (b) for switching off-greater than 10 lux for 30 seconds. (4) auto voltage levels. (a) high voltage trip/auto reset- if voltage and gt 280 ac/and it 270v resp. (5) led for indicating the operating status. (6) during based switching of option of 04 to 08 hours with resolution of 1/2 hour. (7) over ride option continuous on and continuous off. makes: swadep-02 ec-03kw of kakatiya energy systems/ ssge or similar. note: (1) warranty and test certificate should be sent with material (2) one sample to be got approved by consignee before bulk supply.

Central Government And Public Sector

CTN :42865622

30 Dec, 2025 2.54 Crore

Kollam - Kerala

Tender For corrigendum : supply of 11kv abs components - 11 kv 400 a abs components ( please refer technical details on general terms and conditions of the tender), hot dip galvanized base channel, hot dip galvanized ms cast iron roller, hot dip galvanized side plate for roller assembly, brass bush bearing, hot dip galvanized contact guard, 6 turns phosphorous coiled spring, hot dip galvanized fixed arching horn, hot dip galvanized moving arching horn, hot dip galvanized pentograph assembly, 12 turns coiled spring, hot dip galvanized top clavis assembly, hot dip galvanized intermediate guide, hot dip galvanized operating handle assembly, hot dip galvanized 25mm sq operating shaft 2 meter, hot dip galvanized ms l clamp for moving contact, hot dip galvanized ms l clamp forterminal pad, 33.7 mm outer dia 30mm inner dia b class gi pipe 6 mtr, hot dip galvanized polymer insulator end fittings, copper rivet, hot dip galvanized ms rivet for spring guide, frp rod, silicon polymer raw material for injuction moulding

Central Government / Public Sector

CTN :43152049

29 Dec, 2025 NA

Sambalpur - Odisha

Tender For supply of frp body side window arrangement for scn irq coach w/o item no.14 to rcf drg. no. sq54100, alt.-i. material and specification rdso specification no. rdso/2007/cg-02 rev-1 with amdt-2 of aug. 2016 & rdso specification no. rdso/2007/cg-03 rev-1.

Central Government/Public Sector

CTN :43127526

31 Dec, 2025 NA

Katipala - Karnataka

Tender For custom bid for services - tender for annual rate contract for specialized works at mrpl as per boq and scope of work (bidder has to quote lumpsum price higher or lower than the sor value including gst); 1 1057794 providing and laying of 6 mm frp with bisphenol a epoxy vinyl ester resin(viscosity 450mpa density 1.08g/cm3). 6mm thick laminate with the construction: sv(surface veil)+2x csm(chopped strand mat) 450 g/m2+wr(woven roving 800 g/m2)+csm+wr+csm,glass content 40wt% (tensile strength 150mpa flexural strength 210mpa) including primer as per the technical specifications and directions of the eic. 2 1057795 providing and laying of 4 mm frp with bisphenol a epoxy vinyl ester resin(viscosity 450mpa density 1.08g/cm3). 4mm thick laminate with the construction: sv(surface veil)+2x csm(chopped strand mat) 450 g/m2+wr(woven roving 800 g/m2)+csm,glass content 40wt% (tensile strength 150mpa flexural strength 210mpa) including primer as per the technical specifications and directions of the eic. 3 1057796 providing and laying of 2 mm frp with bisphenol a epoxy vinyl ester resin(viscosity 450mpa density 1.08g/cm3). 2mm thick laminate with the construction: sv(surface veil)+2x csm(chopped strand mat) 450 g/m2+wr(woven roving 800 g/m2)+csm,glass content 40wt% (tensile strength 150mpa flexural strength 210mpa) including primer as per the technical specifications and directions of the eic. 4 1057797 providing and laying of 6 mm frp with isophthalic polyester resin (viscocity of 500mpa tensile strength of 75mpa tensile elongation 4%& flexural strength of 140 mpa ) including primer as per the technical specifications and directions of the eic. 5 1057798 providing and laying of 4 mm frp with isophthalic polyester resin (viscocity of 500mpa tensile strength of 75mpa tensile elongation 4%& flexural strength of 140 mpa ) including primer as per the technical specifications and directions of the eic. 6 1057799 providing and laying of 2 mm frp with isophthalic polyester resin (viscocity of 500mpa tensile strength of 75mpa tensile elongation 4%& flexural strength of 140 mpa ) including primer as per the technical specifications and directions of the eic. 7 1057810 supply and laying of 2 mm frp with general purpose glass and resin including primer as per tender and instructions of eic. 8 1057811 joints repair of existing ppg lining with thermoplastic chemical resistant ppg of 3.5 mm thick where 2 mm will be the sheet and 1.5 mm aprox is the adhesive flooring & lining having tensile strength at yeild not less than 37.59 n/mm2,elongation yield- 25.2%,flexural modulus- 1522.5 n/mm2 and acid and alkaline resistance from ph value 2 to 14 and as per enclosed specification and as directed by eic 9 1016067 supply of thermoplastic chemical resistant ppg of 3.5 mm thick where 2 mm will be the sheet and 1.5 mm aprox is the adhesive flooring & lining having tensile strength at yeild not less than 37.59 n/mm2,elongation yield- 25.2%,flexural modulus- 1522.5 n/mm2 and acid and alkaline resistance from ph value 2 to 14 and as per enclosed specification and as directed by eic 10 1016068 laying of thermoplastic chemical resistant ppg for 3.5 mm thick where 2 mm will be the sheet and 1.5 mm aprox is the adhesive flooring & lining including removal of the exisiting lining,joining/welding etc all complete as per enclosed specification and directed by eic. 11 1028194 supply of 5 mm pp/frp prefabricated system where sheet will be of 5mm in black color with u.v. stabilizing agent. along with material for 5 mm thick frp lining (adhesive) i.e. resin, woven roving, csm and special additive(hsn code 70199090). and as directed by eic 12 1028195 laying of 5mm pp/frp prefabricated system where sheet will be of 5mm in black color with u.v. stabilizing agent. along with material for 5 mm thick frp lining (adhesive) i.e. resin, woven roving, csm and special additive(hsn code 70199090) 13 1057812 providing and applying of epoxy putty filling in irregularitie

Central Government/Public Sector

CTN :43104073

02 Jan, 2026 NA

Multi City - Multi State

Tender For (a) (i) replacement of ac sheet with galvalume sheet including painting of steel structures arrangements and life line arrangement at asrs shed inside shell factory (ii) repairs to north light glass, frp gutter joints, spout pipes, curved sheet and flashing sheet at shell factory (b) proposed construction of material storage building for electrical maintenance wing in furnishing division & (c) provision of platform for eot crane bus bar maintenance at various shops of shell factory

Central Government/Public Sector

CTN :43017924

23 Dec, 2025 35.03 Lacs

Varanasi - Uttar Pradesh

Tender For supply of sitc of earthing material for new dvor site at varanasi airport c c - copper plate , copper strip , copper wire , copper rod , insulated copper wire , gi pipe with socket and reducer 2inch 1inch , gi pipe with suitable gi base plate to mount 4 inch gi pipe , perforated gi earthing pipe , pvc pipe , heavy duty pvc pipe plastic corrugated hose , salt , charcoal , raceway with l and t junction , perforated cable tray with l and t junction , extension board , self-supporting heavyduty folding aluminium ladder , heavy duty pvc pipe plastic corrugated hose , hose pipe , electrical cable , electrical top , frangible fiber reinforced plastic frp poles , conventional lightning arrestor , sitc work

Frp Window Frame Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors