Latest fuel dispenser spares Tenders | Government fuel dispenser spares Tenders

Central Government/Public Sector

CTN :45602829

10 Jul, 2026 NA

Solapur - Maharashtra

Tender For [1]provision of stp (50kld) with ug tank, water supply pipeline, pump house & waste water flow system at railway hospital, solapur.[2] sewage treatment plant (50 kld) with ug tank, water pipe line & pump house at sdb under aden/klbg.

corporations/Associations/Others

CTN :45600171

29 Jun, 2026 NA

Pune - Maharashtra

Tender For regarding the seperation of operation and maintenance charges under the comprehensive annual maintenace cont method for the sewage pump house coming under the environment department of the municipal corporation

CTN :45592297

24 Jun, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan points (06) in

CTN :45578810

22 Jun, 2026 5.77 Lacs

Multi City - Multi State

Tender For maintenance of electrical installation & fans repair maintenance of booster p/sets, ro, swhs, ac appliances refrigerator, dc & wc etc. in the r/o hmps bungalows under f/shah road sub division-1, ded-201, (sh: s/f of dewatering/sewage submersible pump and supply, installation, testing and commissioning of water pumps).subwork/packages:s/f of dewatering/sewage submersible pump and supply, installation, testing and commissioning of water pumps.

Central Government And Public Sector

CTN :45346149

24 Jun, 2026 NA

East Champaran - Bihar

Tender For corrigendum : supply of kirloskar make pumps spares on door delivery basis at hbl plant sugauli, east champaran, bihar - supply of kirloskar make pumps spares at hbl plant sugauli as per the technical specification mentioned below:, bare pump model db 100/40 or ib 100/40xe,ci impeller, wearing plate de sp-4l make kirloskar, screw counter sunk m12 1.75 50 mm lft ss make kirloskar, nut hex head (ms) sp-4l m12 1.75, sewage dewatering submersible pumpmodel eterna 15000cw 4plpower rating 15 kw / 20 hpdelivery size 150 mmrated voltage 380 vspeed 1440 rpmmax solid handling size 45 mmhead range 6 m to 20 mflow 288 m /hr to 400 m /hrimpeller cidelivery casing cimotor body cipump shaft cspump make kirloskarsuitable cable for eterna 15000cw 4pl pump 30 m with star delta panel., self-priming pump coupled with ie2 motor, starter, and cablemodel sp4l + with 12.5c4 motor power rating 9.3 kw / 12.5 hpsuction 100 mmdelivery 100 mmrated voltage 415 vspeed 1450 rpmimpeller dia 292 mmhead range 10 m to 26 mflow range 41 lps to 16 lpsmaterial of construction (moc):impeller cidelivery casing cimotor body cishaft c40sealing gland packingpump make kirloskarstar delta panel for sp4l pumpsuitable cable for sp4l pump 30 m.

CTN :45181042

18 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For bid to ras supply of 2ft , looking mirror 600mm x 450mm , looking mirror with cup board , main switch 16 amp 240 dp , loop hole 700 x 300mm , mattress , mcb 10 amp sp , mcb 16 amp , mcb 63 amp , mcb 32 amp , mcb 64 amp , nails 4 inch , nails 3inch , nails 1 inch or 2inch , nails 6 inch , net mosquito wire 4mm dia ginut bolt 160 mtr fmn , nipple 20mm 4inch , nut and bolt with waser , p trap 4inch dia , paint brush 4 inch , paint og or green , paint red oxide , yellow paint , pbs roll with 20mtr long , pedestal fan , peg stay 6 hook , pillar cock 15mm , pillar tap , pino switch 15 amp , pipe pvc 4 inch dia , ply wood 4 inch x 8 inch , plywood 6 inch x3 inch with cushion , plywood 8 mm 3x6 , plywood cushion with matrix , pvc bib tap 20mm , pvc elbow 4 inch dia , pvc float valve 20mm , pvc pipe 110 mm , pvc socket 4 inch dia , pvc solvent , pvc stop cock 20mm , pvc wire 1.5 sqmm single core , pvc wire 2.5 sqmm single core , reducer , round up , s or s combination 5 pin 15 amp , s or s combination 5 pin 5 amp , sand bag , security light , sewage pit , shade conical , shower rose steel , sintex 1000 ltr , sintex tank 500ltr , sleeping double bunk bed with cushion or ply , sliding bolt , soap dish steel , socket 10 amp female , socket 5 amp , socket with switch 15 amp , srt 6ft long , srt 8 ft or 10 ft , ss comb with box 15 amp , ss combination 5 amp , ss jali for window , ss shower rose 6inch , ssc 5 amp , ssc 15 amp , steel tap 20mm long body , steel tap 15mm long tab , stop cock brass 15 or 20 mm , switch point 5 amp with pvc board , tap 15mm , tap steel long body 20mm , table 3 ft x 2 ft steel , tank connecter , tapping screw 2 inch or 3 inch or 5inch , tarpaulin oil , toilet seat , towel stand , union 15mm gi , union 20mm gi , urinal port ceramic , wall mounting fan 400mm sweep , wall gabin basket , wash basin with pipe , wastege pipe , water tap b.b tap , wc indian type , wc seat with cover ewc , white cement , white distemper , white paint , white putti , window glass , wooden cabinet 0.75x0.40x0.80mtr , wooden plank 10 ft x 1 ft x 2 inch , wooden door , wooden primmer tullu pump 1/2 hp , 20mm tank connection, 25mm gate valve, acrylic sheet 4ft x 4 ft, aggregate 20mm, aluminum door, aluminium strip, angle cock, angle holder, angle valve 15mm, baby concertina coil (ffl), bathroom tiles, bed switch, bib cock 15 mm, bib cock 20mm, bib cock brass 1/2inch, bib cock brass 3/4 inch, bib tap brass, binding wire, black paint, blue paint , bow handle, brass pipe, bricks , bulk head fitting, casing & caping, ceiling fan 1200mm with regulator, ceiling rose, ceiling tiles (2ft x 2 ft), cement bag 50 kg, ceramic urinal pot , led bulb 20 w, ppgi sheet 6 x 4ft , ppgi sheet 10 x 4 ft , ppgi sheet 12ft x 4 ft , ppgi sheet 8ft x 4ft , change over 32 amp , change over 63 amp, change over switch 200 amp, chemical (water purification eqpt ro), cistern tank 10 ltr, clamp 40mm, copper pipe 4ft long, copper prong & glove, cousion sheet with plywood, curtain rod with end cap, curtain rod bracket , cushion chair, cusion with mattress, cushion for double bunk bed, cushion with ply, distemper, door 5ft x8ft double shutter (iron), door closer, double bunk, elbow gi 20mm, drainage pipe , exhaust fan , filter, fire extinguisher 1 kg, floor tiles 2ft x 2 ft, flush tank 10 ltr , flushing cistern 10 ltr complete , flushing pvc pipe, gabion baskets, gate valve 15mm, gate valve 25mm, geyser 3 ltr, gi l bow , gi elbow 20mm, gi gate valve 20mm, gi nipple 20 mm, gi pipe 80mm, gi pipe 20mm, gi socket 25mm, gi socket 20mm, gi union 20mm, gi strip, gi union 25mm, gi wire, girder 9 inch x4.5 inchx10 inch, glass putty, hdpe black polythene sheet for bunker 20 x 30, hdpe //bid details 2 / 143

Central Government/Public Sector

CTN :45596002

29 Jun, 2026 25.00 Lacs

Ahmedabad - Gujarat

Tender For repair/maint of stp, sewage pump house, swimming pool, dg sets and allied wks under ge (a) ahmedabad

Central Government/Public Sector

CTN :45575355

08 Jul, 2026 19.08 Lacs

Delhi - Delhi

Tender For special repair of e/m installation (pump house,power house,sewage pump house) at cvd line, taurus sainik aram grah and dgbr under ge west delhi cantt-10

Central Government/Public Sector

CTN :45329483

24 Jun, 2026 12.61 Lacs

Nagrota - Himachal Pradesh

Tender For corrigendum : provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate nu