Latest fuel gauge spares Tenders | Government fuel gauge spares Tenders

State Government

CTN :45595794

08 Jul, 2026 9.94 Lacs

Doda - Jammu And Kashmir

Tender For repair and renovation of hospital at base camp including procurement of lab instruments chanderkote. - demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of engineer-in charge:1:3:6 or richer mix (i/c equivalent design mix), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), providing upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead with cement mortar 1:4 (1 cement : 4 fine sand), providing and laying ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to is: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. in colour such as white, ivory, grey, fume red brown, providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 600x600 mm, providing and fixing ply wood 5 ply with commercial ply on both faces 6 mm thick, dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : upto 10 mm thick, providing and fixing wooden moulded corner beading of size 50x50 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete. second class kail wood., providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :budloo / fir wood., providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws. first class kail wood 30mm, providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 2nd class teak wood beading 62x19 mm, providing and fixing aluminum tower bolts isi marked anodized (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10mm, providing and fixing aluminum handles isi marked anodized (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 liter low level white p.v.c. flushing cistern,

CTN :45586220

27 Jun, 2026 NA

Murshidabad - West Bengal

Tender For supply of measuring instrument for inspection and quality checking of materials of different major rli scheme berhampore-i (a-m) division - tubular vernier inside micrometre extension rod type 50-1000mm range, 8 pc extension rod least count 0.01mm ( mitutoyo brand), s.s pi tape 28 mm to 300mm, least count 0.02mm ( pi tape brand), s.s pi tape 300mm to 600mm least count 0.02mm ( pi tape brand), outside micrometre, range 0-25mm least count 0.01 (mitutoyo brand ), vernial caliper 0-200mm least count least count 0.02mm (mitutoyo brand), coating thickness gauge meter (electrocoat brand), oscilloscope for solar vfd ( hand held type) suitable for 415 volts (sky king brand), auto level with heavy duty aluminium double lock tripod stand and 6m levelling staff (sokia brand), laser type digital techometer (generecbrand), digital power clamp meter (sigma brand), meger digital type 1000 volt insulation tester (sky king brand)

State Government

CTN :45533108

23 Jun, 2026 1.87 Lacs

Jhajjar - Haryana

Tender For job no.1212/2026 (hew) work of providing and fixing and installation open gym equipments and supply and installation cast iron bench in prithviraj chauhan park in sector-6, at u/e jhajjar and all other works contingent thereto. (re-invited) - 26.58.3 supply and installation of garden bench3 cast iron bench of 1800 mm length, 900 mm width, 450 mm seating height, sides made of cast iron. seat and back shall be made of 10 stripsof m.s. pipes 63 mm x 25 mm of 14 gauge with one m.s. flat 25 x 10 mm welded at the centre, below and back of the seat and back rest. spray painted with approved brand paint. fixed by grouting with 1:2:4 cement concrete (minimum weight of each bench 105 kg). all materials required to be as per bis specifications., app. item double cross trainer main pipe 114 mm od & 3.75 mm thickness m/s round pipe handles made of 38mm x31 mm m/s round pipe with best quality rubber handle for hand grip working with rubber seal bearing system and foot rest main pipe for 60 x 40 mm m/s flat pipe size of foot rest 5.5"x12" with base plastic cover all alloy cover with ss cover all m/s pipe best quality powder coating., app. item double leg press main round pipe 114 mm od & 3.75 mm thickness m/s round pipe seat made of m/s sheet 16gauge size of seat is 12"x12" fixed on 48 od round pipe smoothly working with rubber bearing system all alloy covered with s.s cover plastic base cover and best quality powder coating., app. item shoulder bilder main pipe 114 mm od & 3. 75mm thickness 17" round wheel made of 31 mm round pipe 25 mm round pipe with bearing system and s.s nut cover with plastic handle and u bend join with main 114 mm pipe for steering wheel is 48 mm od round pipe all alloy cover withs s cover best quality plastic handle on wheels &base fixed with nut bolt 8 mm m/s plate with plastic cover with best quality powder coating, app. item double chest press made of 114 mm od & 3.75mm thickness 38 mm round pipe 48 mm round pipe soxs0 mm sq pipe complete operating with bearing system with rubber seal bearing all alloy are covered the s.s covers & best quality rubber handles for grip and smoothly working. plastic base cover and best quality powder coating

State Government

CTN :45533116

23 Jun, 2026 1.87 Lacs

Jhajjar - Haryana

Tender For job no.1213/2026 (hew) work of providing and fixing and installation open gym equipments and supply and installation cast iron bench in swami omanand smriti van park in sector-6 at u/e jhajjar and all other works contingent thereto. (re-invited) - 26.58.3 supply and installation of garden bench3 cast iron bench of 1800 mm length, 900 mm width, 450 mm seating height, sides made of cast iron. seat and back shall be made of 10 stripsof m.s. pipes 63 mm x 25 mm of 14 gauge with one m.s. flat 25 x 10 mm welded at the centre, below and back of the seat and back rest. spray painted with approved brand paint. fixed by grouting with 1:2:4 cement concrete (minimum weight of each bench 105 kg). all materials required to be as per bis specifications., app. item double cross trainer main pipe 114 mm od & 3.75 mm thickness m/s round pipe handles made of 38mm x31 mm m/s round pipe with best quality rubber handle for hand grip working with rubber seal bearing system and foot rest main pipe for 60 x 40 mm m/s flat pipe size of foot rest 5.5"x12" with base plastic cover all alloy cover with ss cover all m/s pipe best quality powder coating., app. item double leg press main round pipe 114 mm od & 3.75 mm thickness m/s round pipe seat made of m/s sheet 16gauge size of seat is 12"x12" fixed on 48 od round pipe smoothly working with rubber bearing system all alloy covered with s.s cover plastic base cover and best quality powder coating., app. item shoulder bilder main pipe 114 mm od & 3. 75mm thickness 17" round wheel made of 31 mm round pipe 25 mm round pipe with bearing system and s.s nut cover with plastic handle and u bend join with main 114 mm pipe for steering wheel is 48 mm od round pipe all alloy cover withs s cover best quality plastic handle on wheels &base fixed with nut bolt 8 mm m/s plate with plastic cover with best quality powder coating, app. item double chest press made of 114 mm od & 3.75mm thickness 38 mm round pipe 48 mm round pipe soxs0 mm sq pipe complete operating with bearing system with rubber seal bearing all alloy are covered the s.s covers & best quality rubber handles for grip and smoothly working. plastic base cover and best quality powder coating

Central Government/Public Sector

CTN :45549382

01 Jul, 2026 NA

Bangalore - Karnataka

Tender For supply of 25kg fire extinguisher mono ammonium phosphate powder 90 stored pressure type, pressure gauge ,gross weight 76kg,empty weight 51kg,can height 1200mm,diameter 300mm,discharge time less than 30 secs, controllable discharge mechanism(squeeze grip with easy snap safety seal),range minimum 6 meters, applicable on class a,b,c and electrically started fire, can construction :deep drawn & co.,mig welded, valve construction: forging and machining ,internal coating of can: epoxy powder coating, external coating of can: expoxy polyester power coating, sheet metal thickness:4.00 mm ,is 16018 and ce approved 1year warranty with superior quality epdm rubber. hose pipe etc., including cost of supporting materials likems stand & accessories if it is fixing wall/floor/ms brackets & accessories complete as per specifications. [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45550753

17 Jun, 2026 NA

Rajkot - Gujarat

Tender For supply of dining table with six seating capacity, heavy teck wood structure with six heavy duty chairs with cushion, handle supported. marble top or glass top 25mm thickness. product name: heavy-duty steel frame recreation chair with stretcher. 1. structural frame: the main structure must be constructed from heavy-duty crca (cold rolled close annealed) steel tubing (minimum 25mm diameter and 1.2mm wall thickness). the design must incorporate a steel stretcher (horizontal reinforcement bar) between the legs for enhanced structural stability and to prevent frame spreading under heavy loads. 2. support & armrests: integrated handle support (fixed armrests) made of steel or high-impact polymer, designed for ergonomic comfort and securely fastened to the main frame. 3. cushioning & upholstery: > * seat & back: must feature high-density, high-resilience molded pu foam (minimum density 32 kg/m? for back and 40 kg/m? for seat) to prevent sagging over time. tapestry: upholstered in premium-grade, breathable heavy-duty fabric or high-quality pvc leatherette with high abrasion resistance (martindale test > 30,000 rubs). 4. finish: all metal parts must be treated with an anti-corrosive, 7-tank phosphating process followed by an epoxy powder coating (minimum thickness 50?60 microns) for a scratch-resistant and rust-proof finish. highest; known for strict gauge standards.excellent; premium finish and aesthetics. best value for high-volume use.foam quality, molded pu (long life).,thick cushioning; soft feel. high-density resilient foam. weight capacity: if not specified in the description, add a clause: "the chair must safely support a static load of minimum 130 kg." would you like me to adjust the "estimated rate" for your requisition based on the current market price for these brands make: godrej, nilkamal or or similar [ warrantyperiod: 24 months after the date of delivery ] ]

CTN :45377762

18 Jun, 2026 NA

Kinnaur - Himachal Pradesh

Tender For corrigendum : supply of ordinary portland cement grade 43,stone aggregate shall be crushed stone 20mm,coarse sand,stone aggregate shall be crushed stone 40mm,rr stone,tmt steel bar 16mm dia,tmt steel bar 12mm dia,tmt steel bar 10mm dia,tmt steel bar 8 mm dia,binding wire 20 gauge 0 point 9mm,shuttering water proof plywood of size 8 feet x 4 feet and 12mm thickness,nails 2 inch,nails 3 inch,nails 5 inch,quick setting,2nd class hardwood plain fillets,wooden ballies 75mm to 100 mm,pbs roll,bitumen or blown type,water proofing compound,hdpe film of 400 micron,loop hole of size 2130 x 1067 mm,wooden scantling 3 point 20m,steel door of size 900x1800 mm,lightning conductor,8 pin cloth hanger,ms round pipe 150mm dia,ms round pipe 20mm,pre painted galvalume aluminum zinc coating gi based corrugated steel sheet 0 point 60mm thick,75mm dia pvc pipe for weep hole make supreme or kissan or prince,ms plate 10 mm,ms plate 20 mm,shredded rubber 150 mm,pvc single core 1 point 5 sqmm,pvc single core 2 point 5 sqmm,cable pvc insulated and pvc 1100v gr

Central Government/Public Sector

CTN :44463796

15 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For bid to ras corrigendum : supply of paint coating thickness gauge , portable surface roughness tester

Central Government And Public Sector

CTN :45404391

17 Jun, 2026 NA

Biswanath - Assam

Tender For supply of coating thickness gauge digital - range 0 to 2000 micrometer with resolution 1 micrometer. ferrous and non-ferrous auto select, detachable probe, standard test foils, zero calibration plates in carry case with calibration certificate from nabl/government approved lab.; make/brand: iti /accuplus/caltech/elcometer. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45421866

15 Jun, 2026 NA

Chandigarh - Chandigarh

Tender For supply of coating thickness gauge digital [ warranty period: 30 months after the date of delivery ] ]

Fuel Gauge Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors