Latest fuel oil level gauge Tenders | Government fuel oil level gauge Tenders

CTN :45416452

22 Jul, 2026 2.42 Crore

Rohtak - Haryana

Tender For corrigendum : rate contract for 02 years( extendable) for purchase of various types of consumables for department of aneaesthesiology, pgims, rohtak- heat & moisture exchange filters (hmef): hepa bacterial and viral fi with hme properties offering optimum hydrophobic filtration performance. gas sampl port, for end tidal co2 monitoring. recommended tidal volume range 150-1200ml.ev pleated filter medium to allow maximum filtration efficiency with minimal resistance flow. low dead space, not more than 45-55 ml. single use, sterile ece/usfda/iso/ , heat&moisture exchangers (hme) filter for pediatric us , recommended tidal volume <600ml.low weight. low dead space. suitable for b ventilated and spontaneously breathing patients. low resistance to flow. corrugated pa medium with high efficiency to recover about 75% of the energy and moisture. single sterile. ece/usfda/iso , heat & moisture exchangers (hme) for spontaneous breathing in tracheostomized patients. suction port to allows access to suct , catheter. clear housing to allow visualization of contamination. integrated oxygen port allow delivery of supplemental oxygen. recommended tidal volume range from 1000ml.compact and lightweight. corrugated paper medium device can be used fo maximum period of 24 hours. single use sterile. minimum resistance anti occlus mechanism. ece/usfda/iso , epidural set. a set containing tuohy's epidural needle minimum length 80m 16g, 17g and 18g, and corresponding gauge epidural catheter with closed tip and th lateral eye, length 90-100 cm and flat filters 0.2 micrometer hydrophilic two way, fill area approx 4.91 cm², priming volume 0.75 ml all connections should be of luer lock ty lor(loss of resistance) syringe, presterilized. ece marked/usfda approved , combined spinal epidural set. containing 18 g touhy epidural needle minimum 80 mm length. pencil point, spinal needle with twist lock system, marking tuohy's needle hub and depth marking on tuohy's needle hub containing correspond clear catheter with connection, closed end and 3 lateral eye of approx. length 90-100 with epidural filter 0.2 micrometer hydrophilic two way, epidural sponge and lor (loss resistance) syringe. ece marked/usfda approved - , needle for spinal anaesthesia, quincke type, same colour coding the hub and stylet, presterilized. usfda and europen ce approved- , (a) 23 g, 90mm length od approx 0.64 mm, , (b) 24g,90mm length od approx 0.5mm with/without introducer , (c) 25g, 90 mm , (d) 26g, 90 mm , (e) 27g, 90mm , paed. spinal needle without introducer, colour coded length 50mm, g, od 0.5 mm, presterilized. usfda and europen ce approved , cuff manometer: allows controlled initial cuff inflation. intermittent press monitoring facility. instant visual confirmation of intra-cuff pressure. simple operation pressure adjustment without need for disconnection or introduction of syringe into syst solid green zone indicates usual cuff pressure range for tracheal & tracheosto tubes.connecting tube is supplied with the gauge for convenient positioning. portable ga and clips easily into pocket. , face mask- clear, reusable, pvc material, transparent for good visibil adjustable cushion for better comfort. , sizes:- , a) 0, , b) 1, , c) 2, , d) 3,0) 4,1) 5- , anatomical facemask made up of antistatic inflating pad, malleable, anatom. chaned to give precise seal and fit comfortably, sizes 1.2.3.4 , disposable lma with preformed curve 90 degree like ilma with airwa tube with standard connectors for anaesthesia circuit. us fda approved. sizes 1, 1.5,2, 2.5,3,4,5 , resuable pressure infusion bag for administration of fluid to patient unde pressure, compatible with 500 ml fluid bags, flexible, stury, pvc tubing and manometer stop cock and hand pump, latex free , clear pressure- monitoring lines, which can withstand pressure up to 500 psi with minimal damping, non kinkable, pre-sterilized, disposable, id/ed1/2 mm. length 100 cm, 150cm & 200 cm. low dead space but pe may be optional

Central Government/Public Sector

CTN :45709858

20 Jul, 2026 NA

Ajmer - Rajasthan

Tender For supply of fuel oil level gauge assembly to dlw drg. no. tpl-0379, alt. f (sheet 1 of 5, part no. 11440028/for line-1) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45589202

27 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of fuel oil level gauge to drg.no. tpl-0378 sheet 1 of 3,line-1 , alt-h, dlw part no. 11440030. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45174697

20 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot non ferrous scrap - p.l. no. 98230025. aluminium scrap consisting of condemned and unserviceable bkbl fans,bmbc dome covers, fip / sump door / tappet covers, panel boards, armature fans, impellers , blowers, fuel oil level gauges , heat sinks , bmbc dome covers, emd strainer, wiper assembly,emd stainer, temperature sensor controller, a9 / sa9 valves, steel cap pistons, pistons , cylinders, pressure guage parts ,head light frame ,portable grinding machine parts, route indicator , heating compressor gear box, side indicator , wiper motor ,horn bell,governor base, turbo impellar,magnetic valve, master contorller coupler , buzzer cover ,steel capped piston, flasher light unit , double side door closer, old hydraulic door closer , choke box , earthing device housing with cover, m.u i.v coupler housing , marker light old light housing , parts of silient gnerators set , motor / auxillary generator covers and similar diesel loco / carriage items aluminium in nature with / without ferrous / rubber /steel/ very meagre quantity of brass/copper attachments. as is where is condition. segregation and removal of attachments not permitted. note:- cssd/goc electronic weigh bridge to be used for weighment.

Central Government/Public Sector

CTN :45049705

12 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of fuel oil level gauge to drg.no. tpl-0378 sheet 1 of 3,line-1 , alt-h, dlw part no. 11440030. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :44362179

30 Apr, 2026 18.39 Crore

Bengaluru - Karnataka

Tender For corrigendum : supply of accessories/ consumables/ spares for medical equipment - temperature cable for blt monitor part no 15-031-0066, accessories stand,wall mount for blt monitor part no 15-031-0099, nibp hose cable for blt monitor part no 15-031-0008, nibp cuff adult for blt monitor part no 15-100-0118, spo2 sensor clip type (one piece)for blt monitor part no 15-100-0358, spo2 sensor clip type for blt monitor part no 15-100-0320, spo2 analog extension cable for blt monitor part no 15-100-0357, five-5 lead ecg cable set clip type for blr monitor part no 15-031-0022, five-5 lead ecg cable set snap type for blt monitor part no 15-031-0002, three-3 lead ecg cable set for blt monitor part no 15-031-001, rs232 communication board for schiller tmt machine (stmt), kit screw stickers epure- sav-01-0024 for ot light, model epure, ball values for drain for-ultrasonic instrument cleaner, epure keybord- sav-01-0025 for ot light, model - epure, analog timer for ultrasonic instrument cleaner., cover glass 1 complete set for famed -mobile lamp., reusable bipolar with fixed plug , 3m-for electro surgical unit (cautary unit) make- eschmann, model- td830, mattress head section (50mm) t20-431-0001), vpx exhaust hose part no-216018 for eschmann suction unit -1no, compressor for sarns tcm ii, battery li-ion - schiller ecg machine, kit sp2 x battery 12 v,80 w hrl 1280 w-part no 001-20-0058, three axis pcb for ot table make- eschmann , model t20a & t20a+ installed at major ot, vpx valve hose part no-216013 for eschmann suction unit, vpx vacuum gauge part no-743077 for eschmann suction unit, vpx vacuum control valve part no-216059 for eschmann suction unit, vpx manifold hose part no-216016 for eschmann suction unit, vpx handle bar grip part no-216076 for eschmann suction unit, vpx gauge hose part no-216014 for eschmann suction unit, thermal print head for schiller ecg machine, hv board for defibrillator dg 400 for schiller defibrillator, recorder paper for schiller defibrillator, thermal printer head with rollar for schiller defibrillator, battery for schiller defibrillator, recorder pcb for schiller defibrillator, adult contact plate for schiller defibrillator, left and right keypad for schiller defibrillator, left and right keypad pcb for schiller defibrillator, paddle pcb for schiller defibrillator, encoder knob for schiller defibrillator, smps module for schiller defibrillator, relay interface board for schiller defibrillator, lcd for schiller defibrillator, hv board 200j for schiller defibrillator, wooden platform for schiller tmt machine (stmt), walking belt for schiller tmt machine (stmt), nibp tube 3m-reusable-2601195 for monitor, model- vista-120, make- drager, smps for schiller tmt machine (stmt), relay board for schiller tmt machine (stmt), opto coupler - speed for schiller tmt machine (stmt), opto coupler - elevation for schiller tmt machine (stmt), main transformer for schiller tmt machine (stmt), main motor for schiller tmt machine (stmt), iu pcb for schiller tmt machine (stmt), interface cables edc to iu, tmt to iu for schiller tmt machine (stmt), eprom for schiller tmt machine (stmt), elevation motor for schiller tmt machine (stmt), edc pcb for schiller tmt machine (stmt), ac drive unit for schiller tmt machine (stmt), ten lead patient cable for schiller tmt machine (stmt), expiratory valve for evita, reusable-8410580, safely disk for maquet (datascope) iabp machine- data scope, recorder board for maquet (datascope) iabp machine- data scope, purge assembly for maquet (datascope) iabp machine- data scope ., pressure transducer cable for maquet (datascope) iabp machine- data scope ., power supply module for maquet (datascope) iabp machine- data scope ., motor controller pcb for maquet (datascope) iabp machine- data scope ., modem board for maquet (datascope) iabp machine- data scope ., main cpu pcb for maquet (datascope) iabp machine- data scope ., front end pcb for maquet (datascope) iabp machine- data scope., fill assembly for m

Central Government And Public Sector

CTN :44992358

15 May, 2026 NA

Cuttack - Odisha

Tender For supply of washer rubber gauge for fuel oil level gauge to emd pt no - 8120779. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :44992363

15 May, 2026 NA

Cuttack - Odisha

Tender For supply of washer fiber gasket for fuel oil level gauge to emd pt no - 8120777. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44948971

11 May, 2026 NA

Ajmer - Rajasthan

Tender For supply of fuel oil level gauge assembly to dlw drg. no. tpl-0379, alt. f (sheet 1 of 5, part no. 11440028/for line-1) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44800392

17 Apr, 2026 NA

Mumbai - Maharashtra

Tender For supply of fuel oil level gauge to drg.no. tpl-0378 sheet 1 of 3,line-1 , alt-h, dlw part no. 11440030. [ warranty period: 30 months after the date of delivery ]

Fuel Oil Level Gauge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors