Latest fuel control system Tenders | Government fuel control system Tenders

Central Government/Public Sector

CTN :43763878

26 May, 2026 NA

Haridwar - Uttarakhand

Tender For bid to ras bid to ras corrigendum : supply of w91311601066 drg: 01160150901 rev: 00 casting for front brg pedestal (rough without machining) cons , w91311701079 drg: 01170130901 rev: 00 casting for hp-ip bearing pedestal & cover spec: hw19791 rev: , w91311801065 drg: 01180129901 rev: 00 casting for ip-lp pedestal (rough without machining) consist , w91311803050 drg: 01180329901 rev: 00 casting for lp-gen pedestal (rough without machining) consist , w91311801057 drg: 01180150901 rev: 00 casting for ip-lp pedestal (rough without machining) consist , w91311803041 drg: 01180350901 rev: 01 casting for lp-gen pedestal (rough without machining) consis , w91311824022 drg: 01182450901 rev: 00 casting for lp-lp pedestal (rough without machining) consist , w91311803025 drg: 01180358901 rev: 03 casing for pedestal and cover (rough without machining spec: , w91311801022 drg: 01180158901 rev: 03 casting for pedestal and cover in rough without machined con , w91311824014 drg: 01182458901 rev: 02 casting for pedestal and cover (rough, without machining) spe

Central Government/Public Sector

CTN :45313461

28 May, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For spindle rough machining for qcnrv valve assy,stvqn5017.

CTN :43465033

26 May, 2026 NA

Hyderabad - Telangana

Tender For bid to ras corrigendum : supply of cnc machining inserts : : -dnmg 15 06 04 rough turning , vbmt 16 04 02 finish turning , vbmt 16 04 04 finish turning , 266rg- 16mm01a125m 1125 threading tool , 266rg- 16mm01a175m 1125 threading tool , n123d2-0150-0002- cm 1125 parting tool , c2r-rs25-ld08db grooving tool holder , lever 174 point 3-847m , screw 174 point 3-830 , key 174 point 1-864 , shim 171 point 35-851m

Central Government/Public Sector

CTN :45217870

22 May, 2026 NA

Haridwar - Uttarakhand

Tender For corrigendum : machining of items with bhel material - upper half ring (rough m/c), lower half ring (rough m/c)

Central Government/Public Sector

CTN :45231033

21 May, 2026 NA

Medak-T - Telangana

Tender For rough and finish machining of casing cover and suction cover

State Government

CTN :45228145

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of ci cs casted items - c.i. casted items on new basis, c i door of boiler as per drawing no ksc/blr/door/35tph approx weight 50 kg suitable for working apto 800 degree centigrate, c.i. tool post of plainer machine approx weight 18 kg each, c i bagasse chuite of boiler as per drawing no ksc/blr/chuite/35tph approx weight 160 kg suitable for working apto 800 degree centigrate (duly machined), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c i door of boiler as per drawing no ksc/blr/door/35tph approx weight 50 kg suitable for working apto 800 degree centigrate, c.i. tool post of plainer machine approx weight 18 kg each, c i bagasse chuite of boiler as per drawing no ksc/blr/chuite/35tph approx weight 160 kg suitable for working apto 800 degree centigrate (duly machined), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, c.s. trash beam for mill size 33"x66" as per drawing approc weight 1 mt, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, c.s. trash beam for mill size 33"x66" as per drawing approc weight 1 mt, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sproc

Central Government/Public Sector

CTN :45205411

25 May, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For various types of spindle rough machining for qcnrv valve assy, favqn4957.

Central Government/Public Sector

CTN :45094166

20 May, 2026 NA

Medak-T - Telangana

Tender For corrigendum : framework agreement (rate contract) for rough machining (vtl and hb) operation of bfp pump casing mdg series for a period of 2 year.