Latest fuel filling station Tenders | Government fuel filling station Tenders

State Government

CTN :45596388

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of electrical and mechanical equipments for shallow bore tube wells phatak bans,sawar khan, chatta mom gran, lal darwaza in matia mahal constituency ac-21. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for operation of up to 15 hp submersible set, made out of not less than 2 mm thick crca for load bearing members and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. the panel size 760 mmx 1360 mm x300 mm and having (1) 63 amp change over- 1 no (2) 63 a tpn mccb -1 no (3) amp meter 0-50 a- 1 no (4) voltmeter 1 no (5) amp & volt meter selector switches-1 set (6) auto-manual + light + control mcb tp 32 amp- 1nos each (7) ct -3nos (8) push button + on/off light 2 nos each (9) 5 kvar shunt capacitor- 1 no (10) aluminium bus bar size 25 mm x 6 mm - 1set (11) 15 hp star delta starter (a) 32 amp power contactor-3 nos (b) overload relay 14-23 a -1 no (c) star delta timer- 1 no ( d) qt timer -24 hours -1 no (e) motor protection relay 200 short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection make:-subtec/protech/ l&t/all djb approved make, s/o pvc insulated flat submersible cable with copper conductor having three core size 2.5 sq mm 1100 volts(100mtr per roll). make- gloster/universal/havells/grandlay/djb approved, s/o g.i pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. make- jindal/tata., s/o g.i tail piece 40mm dia 600mm long medium class with threaded externally on both end. make- tata/jindal, s/o gi socket 40 mm dia with threaded internally. make: jindal/tata/djb approved, s/o gi elbow with both end having thread, size- 40mm. make: jindal/tata/djb approved, s/o gi reducer having thread on boyh end, size: 50mm to 40mm. make: jindal/tata/djb approved, s/o gi union having thread on both end, size: 40mm. make: jindal/tata/djb approved, s/o ms clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc., supply of ms bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center., supply of pvc suction hose pipe 50 mm dia 30 mtr long.make-jyoti/isi, installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, grouting of electric panel digging and fixing the same with the help of cc and laying of gi pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. testing and commissioning of all e&m equipment on no load and full load conditions as per standard and full satisfaction of engineer-in- charge. this is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for opera

Central Government / Public Sector

CTN :45449676

29 Jun, 2026 NA

Digboi - Assam

Tender For corrigendum : supply of item 10 shaft sleeve pn 18 cw pump , item 20 sleeve nut lock nut nde pn 05 cw pump , item 30 lock nut pn 38 cw pump , item 40 sleeve nut lock nut de pn 05 cw pump , item 50 oil seal de outr brg cover pn 39 , item 60 oil seal pn 45 cw pump , item 70 lock washer p n 37 cw pump , item 80 grub screw pn 19cw pump , item 90 gland half pn 30 cw pump , item 100 pump shaft pn 40 f 5822 500 400 , item 110 wrng rng casing pn 2 f 5822 500 400

State Government

CTN :45316465

01 Jul, 2026 1.02 Crore

Umaria - Madhya Pradesh

Tender For corrigendum : procurement of spares of pembril make fluid coupling model 23scr25b of ash slurry pump for ph- ii and model 41scr 24x for ph i and ii at sgtps, birsinghpur - spares for pembril make fluid coupling (model-23scr25b) of ash slurry pump for ph-ii, input shaft, scoop housing bracket, shaft, bearing cover, bearing nut, bearing liner, set bolt, locking washer, shaft ring, if fitted, self locking nut, casing plug for cover plate, oil retaining ring, locking washer part no.56, locking washer part no. 60, scoop housing shroud, counter sunk screw, self locking nut, key woodruff, circlip, end cover, circlip external, circlip internal, scoop housing assembly, impeller, joint collector ring impeller, bonded seal part no. 196, bonded seal part no. 182f, vent tube, connecting tube, leak of nozzel, joint scoop housing bracket, feed tube, pillow block, runner baffle, set bolt, self alinging bearing, spring if (fitted), scoop pin, dowel, runner, end cover, bearing liner, spares of pembril make fluid coupling (model: 41scr-24x) for ph-i&ii, operating rod, operating lever, joint centre spigot, control lever, woodruff key, bearing liner(23124), bearing liner (nu 228), scoop housing assembly, scoop tube assembly, feed tube, leak of nozzle set, centre spigot, shaft, bearing nut, bolt for multi disc unit, self locking nut, vent tube, locking washer/star washer, allen screw for liner, .

Central Government/Public Sector

CTN :45581781

22 Jun, 2026 NA

Karimnagar - Telangana

Tender For corrigendum : procurement of kpd 125-32 kbl pump spares st2 diesel booster pump for ntpc ramagundam - casing,10500,kbl,kpd125/32, enclosed implr,15100,kbl,kpd125/32, pump shaft,18002,kbl,kpd125/32, csg wr rng-suc side,19000,kbl,kpd125/32, csg wr rng-del side,19100,kbl,kpd125/32, imp wr rng-suc side,19200,kbl,kpd125/32, imp wr rng-del side,19300,kbl,kpd125/32, csg cvr,22000,kbl,kpd125/32, lantern ring,22700,kbl,kpd125/32, split gland,22900,kbl,kpd125/32, brg hsg,24000,kbl,kpd125/32, lantern brkt,24800,kbl,kpd125/32, brg cvr-de,27000,kbl,kpd125/32, sft slv-gland pck,31100,kbl,kpd125/32, key f/implr,32000,kbl,kpd125/32, key f/cplg,32100,kbl,kpd125/32, implr nut,33000,kbl,kpd125/32, brg lck nut,33600,kbl,kpd125/32, stuff box bush,35000,kbl,kpd125/32, lock nut,41500,kbl,kpd125/32, constant level oiler,44300,kbl,kpd125/32, oil breather,44400,kbl,pump,kpd125/32, internal circlip,48500,kbl,kpd125/32, oil seal-de,50001,kbl,kpd125/32, sprt foot,25100,kbl,kpd125/32

State Government

CTN :45585320

30 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For supply of spares of double stage split casing pump required for replacement of idm/dmgs pump at unit-3 during coh.

Central Government/Public Sector

CTN :45601539

03 Jul, 2026 NA

Guna - Madhya Pradesh

Tender For supply of power water pump : : - casing , moc-a20 , part no.-1 , model- chp-st 3xi.5-6(sr. no.-69122) , p-1805 , bearing frame , moc- ci , part no.-19 , model- chp-st 3xi.5-6(sr. no.-69122) , p-1805 , shaft , moc- ss316 , part no.-6 , model- chp-st 3xi.5-6(sr. no.-69122) , p-1805 , shaft sleeve , moc- a20 , part no.-6 , model- chp-st 3xi.5-6(sr. no.-69122) , p-1805 , back pullout assembly in a20 shaft/sleeve in ss316/a20 with 21t7ga seal , model- chp-st 3xi.5-6(sr. no.-69122) , p-1805 , casing , moc-ss316 , part no.-1 , model- chp-st 3x1.5-8(sr. no.-15463) , 08-p-11 , impeller , moc- ss316 , part no.- 2 , model- chp-st 3x1.5-8(sr. no.-15463) , 08-p-11 , bearing frame , moc- ci , part no.-19 , model- chp-st 3x1.5-8(sr. no.-15463) , 08-p-11 , shaft , moc- 4140 , part no.-6 , model- chp-st 3x1.5-8(sr. no.-15463) , 08-p-11 , shaft sleeve , moc- ss316 , part no.-14 , model- chp-st 3x1.5-8(sr. no.-15463) , 08-p-11 , back pullout assembly in ss316 shaft/sleeve in 4140/ss316 gland packed arrangement , model-chp-st 3x1.5-8(sr. no.-15463) , 08-p-11

Central Government And Public Sector

CTN :45609010

30 Jun, 2026 NA

Thane - Maharashtra

Tender For supply of bearing housing for crd booster pump part no-350 , bearing bush for crd booster pump part no-545.4 , adapter for crd booster pump part no-145 , impeller ring-suction impeller for crd booster pump part no-503.1 , spacer sleeve for crd booster pump part no-521 , split ring for crd booster pump part no-501 , bearing sleeve for crd booster pump part no-529.4 , bearing sleeve for crd booster pump part no-529.2 , bearing sleeve for crd booster pump part no-529.1 , pump shaft with keys ofr crd booster pump part no-211 , bearing bush for crd booster pump part no-545.1 , wearing ring-casing-diffuser-stage for crd booster pump part no-502.2 , bearing bush for crd booster pump part no-545.2 , wearing ring-casing-diffuser- suction for crd booster pump part no. 502.1 , bearing cover for crd booster pump part no-360 , withdrawal nut for crd booster pump part no-923 , centering sleeve for crd booster pump part no-526 , oil level tube for crd booster pump part no-641 , constant level oiler for crd booster pump part no-638 , set of gasket and o-rings for crd booster pump , set of fasteners for crd booster pump , impeller ring-stage impeller for crd booster pump part no- 503.2

CTN :45602868

25 Jun, 2026 1.19 Lacs

Delhi - Delhi

Tender For maintenance and operation of electrical and mechanical services in extension to parliament house annexe new delhi sh replacement and repairing works of existing vertical casing pumps at pump house a block at extension to parliament house annexe new delhisubwork/packages:replacement and repairing works of existing vertical casing pumps at pump house a block at extension to parliament house annexe new delhi

CTN :45592297

24 Jun, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan points (06) in

CTN :45570563

23 Jun, 2026 26.41 Lacs

Multi City - Haryana

Tender For hiring of dewatering equipment and machinery for emergency flood and waterlogging management during monsoon 2026 in ward no. 15, division-1b, zone-i, mc gurugram. re-call - analysis of rates for 100 hp control panel board, analysis of rate for providing and fixing of split casing centrifugal pump 7000 lpm 35 mtrshead, with 100 hp induction motor, type three phase, complete in all respect. (makekirloskar)

Fuel Filling Station Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government / Public Sector

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government And Public Sector