Latest fueling plant Tenders | Government fueling plant Tenders

State Government

CTN :45596388

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of electrical and mechanical equipments for shallow bore tube wells phatak bans,sawar khan, chatta mom gran, lal darwaza in matia mahal constituency ac-21. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for operation of up to 15 hp submersible set, made out of not less than 2 mm thick crca for load bearing members and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. the panel size 760 mmx 1360 mm x300 mm and having (1) 63 amp change over- 1 no (2) 63 a tpn mccb -1 no (3) amp meter 0-50 a- 1 no (4) voltmeter 1 no (5) amp & volt meter selector switches-1 set (6) auto-manual + light + control mcb tp 32 amp- 1nos each (7) ct -3nos (8) push button + on/off light 2 nos each (9) 5 kvar shunt capacitor- 1 no (10) aluminium bus bar size 25 mm x 6 mm - 1set (11) 15 hp star delta starter (a) 32 amp power contactor-3 nos (b) overload relay 14-23 a -1 no (c) star delta timer- 1 no ( d) qt timer -24 hours -1 no (e) motor protection relay 200 short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection make:-subtec/protech/ l&t/all djb approved make, s/o pvc insulated flat submersible cable with copper conductor having three core size 2.5 sq mm 1100 volts(100mtr per roll). make- gloster/universal/havells/grandlay/djb approved, s/o g.i pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. make- jindal/tata., s/o g.i tail piece 40mm dia 600mm long medium class with threaded externally on both end. make- tata/jindal, s/o gi socket 40 mm dia with threaded internally. make: jindal/tata/djb approved, s/o gi elbow with both end having thread, size- 40mm. make: jindal/tata/djb approved, s/o gi reducer having thread on boyh end, size: 50mm to 40mm. make: jindal/tata/djb approved, s/o gi union having thread on both end, size: 40mm. make: jindal/tata/djb approved, s/o ms clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc., supply of ms bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center., supply of pvc suction hose pipe 50 mm dia 30 mtr long.make-jyoti/isi, installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, grouting of electric panel digging and fixing the same with the help of cc and laying of gi pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. testing and commissioning of all e&m equipment on no load and full load conditions as per standard and full satisfaction of engineer-in- charge. this is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for opera

State Government

CTN :45586150

29 Jun, 2026 96.0 Thousand

Kasaragod - Kerala

Tender For retender-state plan-state plan 2025-26 -kwa ph section cheruvathur- wss to kayyur cheemeni and wss to west eleri -energy efficiency improvement, optimisation of electromechanical items, safety audit and ensuring safety in operation of wtps and pump h

State Government

CTN :45586027

08 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of the items stipulated in the bill of materials with specified specifications. - bosh - electrical drill and hammer drill with bit set, hammer drill concrete - bosch, key hole saw with complete set -4 (1"-6,2"-6,3"-6,4"--6) drill bit k4-6, k10-6), breathing apparatus set with spare cylinder, tent 180 with accessories, inflatable rescue boat with accessories -40hp obm, hydraulic jack 20 tons with ram set matching foot pump, life buoy, angle cutter 14", replacement diamond tipped blade for angle cutter 14"- 350mm, safety goggles, heavy duty working gloves, recipro cutting saw blade, recipro cutting saw blade(152mm), recipro cutting saw blade (130mm), extension cord reel (8mm,100mtr), working lamp with 50mtr lead(with 100w bulp), water tank 500 ltr, mega phone, led search light, led torch light with accessories (multi function), led head light, fire extinguisher portable, rope 10.5mm, 50mtrs, rope nylon 100 mtrs, carabiners, feet extension ladder (30 ft), heavy iron racks, hand saw (18"*410mm), hack saw frame 12" with blade, bolt cutter 30" (750mm), bolt cutter 14" (356.6mm), full body harness, rescue kit bag with accessories, multi purpose iron tool box empty, axe mate kit, rope manila, mfr box, sledge hammer (7kg), sledge hammer (10kg), fire axe, trolley for fiber boat - steel trolley, level 12" (spirit level 12" taparia), screw driver set (5-types), carpenter hammer 3", claw hammer (220gm,8 ozs), brick hammer, long knife, axe, digging iron bar 5.5 feet, crow bar 6 feet, crow bar 3 feet, phawda spade, spade shovels 12" * 10", hoe with wooden handle, pick mattock, bond, pliers 8" (210mm), vise grip 10" plier, chisel for concrete 1", chisel for concrete 1/2, safety helmet, gorund sheet (10*10), stainless steel mug 1 ltr, reflective jacket water proof, handy camera with accessories sony - (hdrcx 9.2mp hd), binocular day vision - olympus, binocular night vision - nikon, honda portable generator 3 kva, multifunction tower light with diesel generator set with trolly, honda submerged pump high -2.9kw discharge 2hp(hose - 25 mtr - 1,cable - 100mtr -1), floating pump 1 hp, chain saw (hitachi 18"), floatable fiber boat with obm (yamaha or equivalent), edelrid bud (royal), edelrid pure straihgt carabiner, edelrid hms magnum screw carabiner, edelrid joker harness, edelrid solid full body harness, edelrid power loc expert sp cord 8mm - 100mtr, edelrid performance 10mm - 100 mtr rope, edelrid performance 12mm - 100 mtr rope, edelrid parrot rope 16 mm - 100 mtr, rockport slithering mitten, figure of eight, anthron double stop decender plus, climbing ascender, rescue helmet, colaman woodsman chair, life jacket, edelrid easy pulley, petzl track transport pulley, seil marine raincoats, rock climbing rope

Central Government/Public Sector

CTN :45608847

10 Jul, 2026 45.00 Lacs

Nilgiris - Tamil Nadu

Tender For repairs/ replacement of water supply pump, control valves and connected items of wellington station under ge wellington

Central Government/Public Sector

CTN :45595953

06 Jul, 2026 42.00 Lacs

Jodhpur - Rajasthan

Tender For repair maint of external ci di gi pipe lines motor and pump stes stp cleaning of ug oh sump and miscellaneous connected items at a a banar under ge banar

CTN :45307529

27 Jun, 2026 NA

Pithoragarh - Uttarakhand

Tender For corrigendum : supply of supply of 05 x fd water supply scheme as per rfp , high head water pump 5 hp , triple layer water storage tank 5000 ltrs , hdpe triple layer water storage tank 1000 ltrs , multi layer composite flexible pipe shall have an inner oblique outer dia of 32 oblique 40mm , complete set of 05 x fd water supply scheme as per rfp , all items as per rfp

CTN :45597887

29 Jun, 2026 178

Multi City - Karnataka

Tender For supply of water supply items to kirugavalu grama panchayat - ½" pvc pipe bend, ¾" pvc pipe bend, 1" pvc pipe bend, 1¼" pvc pipe bend, 1½" pvc pipe bend, 2" pvc pipe bend, 2½" pvc pipe bend, 3" pvc pipe bend, 4" pvc pipe bend, ½" pvc tee, ¾" pvc tee, 1" pvc tee, 1¼" pvc tee, 1½" pvc tee, 2" pvc tee, 2½" pvc tee, 3" pvc tee, 4" pvc tee, 2" service saddle (63x20mm), 2½" service saddle (75x20mm), ½" gi elbow & collar, ¾" gi elbow & collar, 1¼" gi collar, 1¼" gi bend, 2" gi bend, 2½" gi bend, 2" gi collar h/v, 2½" gi collar h/v, 2" gi non return valve, 2½" gi non return valve, ½" gi pipe nipple 1 feet, ¾" gi pipe nipple 1 feet, 2" gi pipe nipple 1mtr, ½" pvc pipe, ¾" pvc pipe, 1" pvc pipe, 1¼" pvc pipe, 1½" pvc pipe, 2" pvc pipe, 2½" pvc pipe, 3" pvc pipe, 4" pvc pipe, ½" pvc elbow, ¾" pvc elbow, 1" pvc elbow, 1¼" pvc elbow, 1½" pvc elbow, 2" pvc elbow, 2½" pvc elbow, 3" pvc elbow, 4" pvc elbow, ½" pvc pipe collar, ¾" pvc pipe collar, 1" pvc pipe collar, 1¼" pvc pipe collar, 1½" pvc pipe collar, 2" pvc pipe collar, 2½" pvc pipe collar, 3" pvc pipe collar, 4" pvc pipe collar, 2" pvc joint collar, 2½" pvc joint collar, 3" pvc joint collar, ½" pvc ball valve, ¾" pvc ball valve, 1" pvc ball valve, 1¼" pvc ball valve, 1½" pvc ball valve, 2" pvc ball valve, 2½" pvc ball valve, 3" pvc ball valve, 4" pvc ball valve, ¾" cpvc pipe, 1" cpvc pipe, ¾" cpvc elbow & collar, 1" cpvc elbow & collar, ¾" cpvc tee, fta, mta, 1" cpvc tee, fta, mta, cpvc gum 29ml, ¾" cpvc ball valve, 1" cpvc ball valve, ¾" cpvc union & tank nipple, 1" cpvc union & tank nipple, solvent cement, solvent cement, solvent cement, ½" pvc mta & fta & end cap, ¾" pvc mta & fta & end cap, 1" pvc mta & fta & end cap, ¼" pvc mta & fta & end cap, ½" pvc mta & fta & end cap, 2" pvc mta & fta & end cap, ½" pvc mta & fta & end cap, 3" pvc mta & fta & end cap, gargen pipe ¾", gargen pipe 1", 2hp v4 sm motor pump 20stage, 3hp v4 sm motor pump 30stage, ¼" hdpe pipe, ½" hdpe pipe, hdpe end connector, stick & paper, thrust bearing & bottom, impellers, rotor bush, do bush, stg bush, ¼" gi pipe, plunger rod 3 meter, gm upper valve, gm lower valve, borewell handle, borewell head, borewell water tank, borewell pedestal stand, ¼" gi collar long, mcb 4 pole, bolt nut 5/8", bolt nut 3/8", nrv lather, x nipple, m-12 boltnuts, bucket washer, cylinder, ½" gi tap, ¾" gi tap, hp motor pump with 10 stage, 7.5 hp motor pump with 12 stage, 10 stage pump, 12 stage pump, 7" cassing pipe, shalk thrid, mrf tape, pcv tape roll, 1.2 mm rewinding copper wire, 2" bore clamp, ½" bore clamp, 2" gi pipe, 4sqmm 3core copper cable flat type, dol electrical panel board, sada electrical panel board, relay ltlk, electrical contact kit, contactor unit, no volt coil, amps meter, volt meter, indicator, dol starter m, dol starter ltlk, 63amps fuse unit, 100amps fuse unit, 7.5hp preventor, 7.5hp-15hp preventor, relay unit-motor, 5" pvc pipe, 5" repair collar, 5" pvc elbow, 5" pvc pipe bend, 5" pvc tee, 5" mta, 5" fta, 5" pvc collar, 6" pvc pipe, 6" repair collar, 6" pvc elbow, 6" pvc pipe bend, 6" pvc tee, 6" plain end, 6" mta, 6" fta, 6" pvc collar, 6" threaded end cap, motor rewinding labour+ worshop turning fitting, charges, motor lifing erection and service fitting, hand pump lifting erection and service, starter board wiring electrical service and fitting, over tank gateawall gm rad leath tredded charge and service

CTN :45443500

25 Jun, 2026 69

Anekal - Karnataka

Tender For corrigendum : procurement of pump motors and allied accessories for hennagara gram panchayat for the financial year 2026-27 - motor and pump 12.5hp 25 stage, motor and pump 5hp 50 stage , motor and pump7.5hp 56 stage, motor and pump 15hp 30 stage , motor and pump 20hp 40 stage, motor and pump 17.5 hp 36stage, motor and pump10hp 20 stage, motor and pump 25hp 40 stage pump, submersible cabel 4sq 3 core , submersible cabel 6sq 3 core , submersible cabel 10sq 3 core , starter 5hp - meco, starter 7.5hp - meco, starter 15hp - meco, starter 17.5hp - meco, starter 20hp - meco, panel board - iso certified, alluminium wires 6sq.mm - iso certified, alluminium wires 10sq.mm - iso certified, alluminium wires 12sq.mm - iso certified, alluminium wires 16sq.mm - iso certified, alluminium wires 20sq.mm - iso certified, gi pipe 2 inches class b , complete panel board items, gi clamp set bore cap, gi collar 2 inch - iso certified, sealent 100ml - iso certified, axcel blades- iso certified, gi bend 2 inch- iso certified, gi nipple feet 2 inch- iso certified, gi nipple 0.75 1feet - iso certified, gi nipple 0.75 2feet - iso certified, gi collar 0.75 inch- iso certified, gi elbow 0.75inch- iso certified, gi nipple feet 1 feet 0.5 inch- iso certified, gi nipple feet 2 feet 0.5 inch- iso certified, gi collar 0.5 inch- iso certified, gi elbow 0.5 inch- iso certified, gi 2 nrv- iso certified, solvent cement gum- iso certified, brass gate wall 2 inches- iso certified, brass gate wall 2.5 inches- iso certified, gi gate wall 2 inches- iso certified, gi gate wall 2.5 inches- iso certified, gi tap 0.5 inches- iso certified, gi tap 0.75 inches- iso certified, gi union 2 inches- iso certified, gi union 2.5 inches- iso certified, gi union 2 inches- iso certified, gi union 3 inches- iso certified, gi tee 0.5 inches- iso certified, gi tee 0.75 inches- iso certified, gi elbow 0.5 inches- iso certified, gi elbow 0.75 inches- iso certified, gi coller 0.75 inches- iso certified, gi coller 2 inches- iso certified, gi pipe 0.75 inches with thread- iso certified, gi thread end cap 0.5 inches- iso certified, hdpe pipe 1.5 inch 20 gauge - iso certified, hdpe pipe 1.25 inch 20 gauge- iso certified, end connection for hdpe- iso certified, motor for open well 1 hp, pump and motore 10hp 50 stage, pump motor 20hp 50 stage, motor 5hp 10stage pump, motor and pump 7.5hp 15stage, amphere meter, volatage meter, pump and motor 25hp 50satage

CTN :45592297

24 Jun, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan points (06) in

CTN :45371582

22 Jun, 2026 12.88 Lacs

Narnaul - Haryana

Tender For corrigendum : supply of hardware items for m.garh w.s. mech division narnaul under jln ws circle narnaul of irrigation department haryana. - servo system oil-32 (iocl lubricants), servo electra/transformer oil (iocl lubricants), servo gem-3/grease (iocl lubricants), servo super- 40, g.i. hex. head bolt with nut (ft) (5/8 x3.5 ), g.i. hex. head bolt with nut (ft) (3/4 x3.5 ), g.i. hex. head bolt with nut (ft) (6/8 x4 ), g.i. hex. head bolt with nut (ft) (1 x6 ), g.i. hex. head bolt with nut (ft) (7/8 x3.5 ), g.i. hex. head bolt with nut (ft) (7/8 x6 ), coupling link assy. for 20cs to 50cs. pump, ht coupling bolt with nylock nut 3/4 x4 , ht coupling bolt 3/4 x 7/2 , ht coupling lock 34 , ht coupling bolt with nut m-33x180mm, ht coupling bolt and nut m33x280 mm, ht coupling bolt with rubber bush for 150cs. wpil pump, ht coupling bolt with nut & 4 no. rubber bush for 150cs, flowmore pump, g.i. hex. head bolt with nut (ft) (3/8 x3 ), ms hex. head bolt with nut (ft) (5/8 x3 ), ms hex. head bolt with nut (ft) (4/8 x2.5 ), ms hex. head bolt with nut (ft) (2.5/8 x2 ), emery paper brand:3 m, sandpaper 120 grit type:fine grit no. :120 colour :red (225mm x 275 mm), hexa blade make: taparia model: hss1218, dimension (lxwxh):30x1.1x0.1cm, cutting angle:90, log book for pump house, rubber insertion sheet 1/8 , emery paper (1 x1 ), water proof polythene

Fueling Plant Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector