Latest full body harness Tenders | Government full body harness Tenders

Central Government/Public Sector

CTN :45345601

26 Jun, 2026 NA

Cuddapah - Andhra Pradesh

Tender For supply of item1 8000hr kit new g200-g250 , item 2 oil rs ultra 209l , item3 unloader kit c190 part no-3002604220 , item4 assembly part no-1623181080 , item5 bearing part no- 500451003 , item6 sealing part kit part no-3002604870 , item7 mvp kit part no-3002604880 , item8 kit shaft seal part no-3001531117 , item9 cv-osv kit part no- 3002604860 , item10 thermostat valve part no- 1830080588 , item11 o-ring 32.2x3 part no-663313000 , item12 contactor 3ts5422-0ap0-ac3-230vac part no- 90965955561 , item13 contactor-3ts522-0ap00-8k- 230vac part no-9096594993 , item14 contactor part no- 9096595558 , item15 over load relay part no-9096594993 , item16 circuit breaker part no-9096595563 , item17 transformer part no-9096595585 , item18 connector mk5 16pins part no-1088003781 , item19 connector mk5 14pins part no-1088003780 , item20 connector part no- 1088003132 , item21 fan axial part no-1092140230 , item22 temperature sensor part no-1089057470 , item23 pressure sensor part no-1089057591 , item24 temperature switch part no-1089063716 , item25 solenoid valve part no-1089062110 , item26 pressure sensor part no- 1089962501 , item27 kit mk55 lpwa with antenna part no- 1837032033 , item28 solenoid valve replacing- 1089038061 part no-1089066834 , item29 valve safety part no-1092000177

Central Government/Public Sector

CTN :43311198

24 Jun, 2026 5757.23 Crore

Delhi - Delhi

Tender For corrigendum : dev of 4/6l of ac kanpur kabrai gf highway start 0.000 (kanpur ring road) to 117.700 near kabrai sec1 and overlay/strengthen other road safety and improvement works on exist kanpur kabrai sec from 7.430 to 130.100 of nh34 in up sec2 on dbfot pattern

Central Government / Public Sector

CTN :45343112

08 Jun, 2026 NA

Gooty - Andhra Pradesh

Tender For auction sale of others - ms scrap - 40.000 mt-delivery on actual weightment basis only. lot no. 5364 26 05 01 gtl gy ms ap available with sse dsl gy. scrap and unserviceable condemned mix m.s. light melting scrap m.s. dust, junk kachara and rusted heavy corroded items such as angular, channels, junked m.s. sheet, air filter jali, fan ring, heavy corroded m.s. pipes, cushion springs, m.s. boxes, galvanised m.s. items, small and big size m.s. corroded drums, loco released material like fitters, ladders, covers m.s. items with nylon, rexine, rubber, glass, and with other attachments, and similar types of miscellaneous m.s. items. total gross weight = 40000 kg / 40.000 mts (approx.)total quantity: 40.000 mts ( approx) (delivery on actual weighment basis) available at bin 2,3 and 4 in new scrap yard ,diesel loco shed, gooty . ds-8 no: 536480009 dated: 15.05.2026. hsn code: 720429 - gst 18%. note to the bidders 1) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.2) post auction no representation shall be entertained.3) for photos of this lot, kindly click on view lot image on bottom left side. 4) gas/chisel cutting is permitted, if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc. witnessing officials to ensure that the lot is delivered as per lot description 5) in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 6) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 7) clubbing of the lots, what so ever, is not permitted for loading 8) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. no representative should be sent to the office of sr.dmm/gtl for collection of delivery fixation letter. as soon as the balance sale value is received by railways online, delivery order will be issued immediately, to facilitate the purchaser to raise an online request for fixation of delivery point. 9) railways does not guarantee for quality, quantity description etc.

Central Government/Public Sector

CTN :45349312

29 May, 2026 NA

Rourkela - Odisha

Tender For requirement of belt,safety,full body har(1items) comprising of following: - belt,safety,full body harness ,

Central Government/Public Sector

CTN :45330828

16 Jun, 2026 NA

Ranga Reddy-T - Telangana

Tender For supply of corded electric circular saw ( input power 1400 w) , corded electric circular saw ( input power 1300 w) , rotary hammer (720w) , angle grinder , electric compound mitre saw 1750w , demolition hammer 1500w 16.8j , portable welding machine , single phase 1 hp dewatering submersible bucket pump , single phase 2 hp dewatering submersible bucket pump , three phase 5 hp dewatering submersible bucket pump , hdpe pipe jointing heater machine , safety helmet , led rechargeable torch light , heavy duty pipe wrenches set , pipe vice , rachet die set with handle , pipe die set , double open end spanner set , black tip 2 in 1 screw drivers set (3 pcs set) , cutting plier set , crow bar, chisel, spade, hammer, axe ( set as per given specifications) , tubular box spanner set , ring spanner set , combination wrench spanner socket set , cordless impact wrench ( 18 v- 400 n-m) with brushless motor

CTN :45329993

09 Jun, 2026 373

Mandya - Karnataka

Tender For procurement of water suply items for the year of 2026-27 kothathi - pvc fiber 1.1/2pipe 10feet hand borewell, copper wire 2.5mm 90mtr, copper wire 1.5mm 90mtr, cable clamp, motor pump 6hp x 8 stg, winding wire 1.3 mm copper, winding wire 1.1 mm copper, winding wire 1 mm copper, pump 12stg, pump 8stg, motor repair charges 6 hp, motor repair charges 7.5hp, cable 3core 4 sq mm, cable 3core 2.5 sq mm, mn2 realy(14-23), auto.switch, preventer 7.5hp to 15hp, preventer upto 7.5hp, no push button, terminal block, r,y,b indicater lamp, volts.meter, amps.meter, start no push button, stop nc push button, overload realay, wiring.charges, motor repair.charges, start repair charges, lathe work fitting.charges, pump repair charges, motor lifting and eraction.charges, suction case set nbr, non slam check valve, pump shaft, teflon plate, couple, suction plate, bush(rubber+ stainlesss steel), suction, ss counter, setting sleeve, middle, bush seal, bush seal cover, impeller, diffuser, bowl, bowl bush, key, step sleeve, washer., hexbolt, square nut, patti (motor&pump), adaptor (motor&pump), pump nrv, stud, nut, safety valve, brackets, motor pipe, lamination, stator stack, body sleeve, motor shaft, rotor stack, copper lamination, pressure ring, balance ring, rotor assembly, upper.housing, grommet, connection piece, oil seal cover, oil seal rubbar, water bolt, sand guard, v-notch rubber, couple key, couple sleeve, stud ring, lock ring, bush, carbon bush, lower.housing, allen bolt, thrust bearing.plate, circlip lock, base, rocker support, rocker support nut, thrust bearing, thrust bearing segment, til-ting pad(trust pad), pcd cup, pcd plate, drain plug, stainer, cable.guard, winding wire 1.2 mm copper, boltnut 3/8, boltnut 5/8, insulation.tape, rewireable fuse 250 amps 415v, rewireable fuse 100 amps 415v, rewireable fuse 63 amps 415v, sada pannel board7.5hp to 15hp, d.o.l pannel board- 7.5hp to 15hp, sada pannel board 7.5 hp, d.o.l pannel board- 7.5 hp, hp7.5 x 12 stg pump, hp6 x 12 stg pump, hp10 x 12 stg pump, hp10 x 12 stg motor pump, hp7.5 x 12 stg motor pump, hp6 x 12 stg motor pump, plunger rod for hand pump borewell, bore hole casing for hand pump borewell, compression cone for hand pump borewell, riser pipe, bore well handle, cylinder for hand pump borewell, axcel for hand pump borewell, bearing for hand pump borewell, water tank for hand pump borewell, pedstail stand for hand pump borewell, nut & bolt for hand pump borewell, head for hand pump borewell, chain nut & bolt for hand pump borewell, baket washer for hand pump borewell, gi 1.25 inch copler/coller 32mm for hand pump borewell, connecting rod for hand pump borewell, gi 1.25 inch pipe for hand pump borewell, pvc tape roll, mrf tape, shalk threas, pvc 6inch cassing pipe, pvc 4.5inch cassing pipe, pvc 7inch cassing pipe, gi 6inch cassing pipe, gi 7inch cassing pipe, hacksaw blades 12x1/2x24t, garden pipe 1inch, garden pipe 3/4inch, lather nrv, electrofusion welding machine ef, hdpe 1.1/2inch pipe, hdpe 1.1/4inch pipe, hdpe 110mm pipe, hdpe 90mm pipe, hdpe 75mm pipe, hdpe 63mm pipe, hdpe(electrofusin fittings) 110mm tapping tee(belt type), hdpe(electrofusin fittings)110mm tapping tee (clamp type), hdpe(electrofusin fittings) 110mm end cap, hdpe(electrofusin fittings) 110mm reducer, hdpe(electrofusin fittings) 110mm equal tee, hdpe(electrofusin fittings) 110mm elbow 45, hdpe(electrofusin fittings)110mm elbow 90, hdpe(electrofusin fittings) 110mm copler/coller, hdpe(electrofusin fittings) 90mm tapping tee(belt type), hdpe(electrofusin fittings) 90mm tapping tee (clamp type), hdpe(electrofusin fittings) 90mm branch saddle(belt type), hdpe(electrofusin fittings) 90mm branch saddle(clamp type), hdpe(electrofusin fittings) 90mm end cap, hdpe(electrofusin fittings) 90mm reducer, hdpe(electrofusin fittings) 90mm equal tee, hdpe(electrofusin fittings) 90mm elbow 45, hdpe(electrofusin fittings) 90mm elbow 90, hdpe(electrofusin fittings) 90mm copler/coller, hdpe(electrofusin fitting

CTN :45335587

28 May, 2026 NA

Alipurduar - West Bengal

Tender For supply of level crossing gate safety chain two boards rings provided at both end, dia of ring 08 mm. [ warranty period: 30 months after the date of delivery ] ]

CTN :45302451

08 Jun, 2026 50.0 Thousand

Shahjahanpur - Uttar Pradesh

Tender For supply of fuel filter element primary , fuel filter element secondary , safety air filter element , inhibitor,corrosion , primary air filter element , spinon lube oil filter , self starter , self starter ring , element,air cleaner , b check kit

CTN :45318064

10 Jun, 2026 NA

Bagpat - Uttar Pradesh

Tender For tender for supply of hardware items -blue paste tube , 15 ml camel make , holdtite , 500gram , grinding wheel ag-4 bosch make , buffing wheel ag-4 bosch make , cutting wheel ag-4 bosch make , angle grinder ag-4 bosch or dewalt make , pather tod tungsten carbide tip , carbon brush for ag-4 grinder , carbon brush for ag-7 grinder , pipe wrench 18 inch , taparia make , pipe wrench 24 inch , taparia make , sly wrench 24 inch , taparia make , hammering spanner size 36 mm , taparia make , chain block capacity 5ton indef make , welding holder , current 600amp , esab make , welding copper lead 35 sqmm , cutting torch , welding safety hand gloves , welding white glass , welding black glass , safety goggles (transparent) , oxygen regulator , lpg regulator , gas cutting nozzle 1/8 inch , gas cutting nozzle 1/16 inch , gas cutting nozzle 1/32 inch , white lead , red lead , emerey paper rough , emerey paper fine , emerey tape fine , graphite powder , hand wire brush 6 inch size , grinding wheel 5 inch bosch make , grinding wheel 7 inch bosch make , cutting wheel 7 inch bosch make , m-seal compound , teflon tape , oxygen rubber hose pipe , red , lpg rubber hose pipe , blue , woolen felt size 1500x4000x16mm (namda) , painting brush 4inch , hose pilpe clamp 1.25inch , rubber star l-75 , lovejoy make , rubber star l-90 , lovejoy make , rubber star l-95 , lovejoy make , rubber star l-100 , lovejoy make , wire braided rubber hose pipe 1inch , pressure- 800psi , temp.-80 to 120 degree c heavy duty , flexible wire braided hose pipe 3/4 inch , (tansperant) pressure- 5kg per sqcm , heavy duty , ms bolt 12x45 mm , full thraed , nylock nut m-12 , split pin m-6x50 mm , split pin m-6x65 mm , metalon pad as per drawing or semple , ms bolt 20x120 mm , halfthraed , nylock nut m-20 , oil seal mykoda/skf no-20-30-10 , oil seal mykoda/skf no-24-42-8 , oil seal mykoda/skf no-30-47-7 , oil seal mykoda/skf no-45-70-8 , oil seal mykoda/skf no-50-70-10 , oil seal mykoda/skf no-50-80-8 , oil seal mykoda/skf no-55-80-8/10 , oil seal mykoda/skf no-60-85-10 , oil seal mykoda/skf no-68-100-10 , oil seal mykoda/skf no-78-100-10 , oil seal mykoda/skf no-65-90-10 , oil seal mykoda/skf no-70-90-10 , oil seal mykoda/skf no-80-100-10 , oil seal mykoda/skf no-75-95-10 , oil seal mykoda/skf no-100-120-13 , oil seal mykoda/skf no-85-100-10 , oil seal mykoda/skf no-85-110-12 , oil seal mykoda/skf no-20-30-10 , oil seal mykoda/skf no-95-120-13 , oil seal mykoda/skf no-100-120-10 , oil seal mykoda/skf no-110-130-13 , oil seal mykoda/skf no-130-160-12/15 , oil seal mykoda/skf no--300-330-15 , hydraulic rubber hose pipe both side flange type -en853/sae100/r1 at , size-3/4inch , length-3 mtr. , max. w.p.-105 bar , 1520 psi make mithra fluidtrans , hydraulic rubber hose pipe both side flange type-1 sn dn16 din 20022 , en853 , sae100 , r1 at , size-5/8inch , length-3 mtr. , max. w.p.-130 bar/1900 psi make polyhose , hydraulic rubber hose pipe both side flange type -sae100 r4-16 , i.d.-1inch , length-1.5 mtr. , max. w.p.-17.2 bar/250 psi make parker markwel , hydraulic rubber hose pipe both side flange type -sae100 r4-32 , i.d.-2inch , length-1.5 mtr. , max. w.p.-10 bar/145 psi make parker markwe , hydraulic rubber hose both side flange type -5 sae100 r4-20 , i.d.-1 1/4inch , length-2.6 mtr. , max. w.p.-13.8 bar/200 psi make parker markwel , hydraulic rubber hose both side flange type -6 sae100 r4-32 , i.d.-2inch , length-2.6 mtr. , max , w.p.-10 bar/145 psi make parker markwel , socket set 1/4 inch drive , 46 pcs set (taparia sa46) , plier 8inch (taparia 1621-8) , pipe wrinch 8inch , pipe wrinch 12inch , slide wrinch 6inch , slide wrinch 10inch , slide wrinch 12inch , ring spanner set mm (6 , 7 to 30 , 32) , d-spanner set mm (6 , 7 to 30 , 32) , wire stripper set , allen key set inch , allen key set mm , nose circlip piler inner , nose circlip piler outer , hexa fram with blade model-hfsa12 size 12inch , screw driver kit (model 802) , long handle screw driver size (300mmx8mm) , cable t

CTN :44133950

17 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : sh2a southern sector of inner ring road sh48c velachery bypass road sh48 marmalong bridge irumbuliyur vandalur mudichur oragadam walajabad road velachery bus stand to tambaram junction on gst - . ncb/ckicp/rs-ip/mc1/03 - road safety improvement works for 3 corridors covering 22.66km in chennai city (sh2a southern sector of inner ring road, sh48c velachery bypass road, sh48 marmalong bridge - irumbuliyur – vandalur – mudichur – oragadam - walajabad road [velachery bus stand to tambaram junction on gst])

Full Body Harness Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector