Web Analytics Made Easy - StatCounter

Fullers Earth Scrap Tenders

Get complete information related to latest Fullers Earth Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Fullers Earth Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Fullers Earth Scrap Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :40716359 Due date: 05 Jul, 202505 Jul, 2025 NA
Tender For fabrication and supply of bathroom and toilet block - fabrication and supply of bc and tb of size 2440 mm x 1860 mm x 2440 mm height in front side and 2100 mm on rear side made up of puf panel , ordinary portland cement 43 grade confirming to is 8112 in 50 kgs hdpe bags make ambuja oblique acc oblique ultratech , fine aggregate sand of best quality confirming to is 383 1970 , crushed stone aggregate 20mm grade confirming to is 383 1970 , crushed stone aggregate 40mm grade confirming to is 383 1970 , hard core stone aggregate not exceeding 63 mm , well burnt common building bricks of sub class b of size 23 x 11 point 5 x 7 point 5 cm conforming to is 1077 , brick bats , non skid ceramic coloured tiles of 400x400x 7 to 8 mm thick first quality heavy duty abrasion resistant confirming to is 15622 make johnson oblique katarina oblique orient , bitumen joint filling compound grade b confirming to is 1834 to 1984 make stp ltd oblique htp ltd oblique tiki tar industries , primer for cement plaster surfaces make dulux oblique berger oblique nerolac , wpc comma as per is 2645 to 1975 makedr fixit oblique sikka oblique hardrock , white cement make acc oblique birla white oblique ambuja , cement based paint make berger oblique shalimar oblique asian paints , iron welding rod pkt of 100 pcs , oil bound distemper off white make berger oblique shalimar oblique asian paints , sand paper , turpentine oil , painting brush 4 inch isi marked , painting brush 3 inch isi marked , red oxide primer confirming to is 104 to 1979 make berger oblique nerolac oblique asian paints , paint synthetic enamel black colour confirming to is 2074 1979 make make berger oblique nerolac oblique asian paints , soap dish chromium plated make ess ess oblique johnson suissegem oblique pryag , angle iron staging of size 1 point 50 mtr x 1 point 50mtr and clear height 2 point 5mtr with vertical ms angle columns of size 65x65x6mm with ms sheet 2mm thick fitted at top of the staging work , septic tank cover of size 2 point 51 x 1 point 26 m with angle iron 50 x 50 x 5 mm with all around and cross bracing and 2 point 0 mm thick ms sheet including 02 nos of 600 x 600 mm size , soakage pit cover of size 1 point 60 x1 point 60 mtr with angle iron 50 x 50 x 5 mm with all around and cross bracing and 2 point 0 mm thick ms sheet including 600 x 600 mm opening with 02 , manhole cover of size 900 x 900 mm with angle iron 40 x40x 5mm with all around and cross bracing and 2 point 0mm thick ms sheet with 02 nos of ms handle , precast rcc baffle wall of size 1200 x 1000 x 75 mm in rcc m 25 grade concrete with reinforcement 10 mm dia tmt bar 150 mm c oblique c both ways complete for fixing in flooring of septic tank , precast rcc baffle wall of size 1150 x 1000 x 75 mm with rcc lintel of size 75 x 100 mm in rcc m 25 grade concrete with reinforcement 10 mm dia tmt bar 150 mm c oblique c , pvc rotational moulded high density polyethylene hdpe triple layer water storage tank cylindrical vertical tank 1000 ltrs capacity , gi socket 15mm isi marked confirming to is 1239 make ravindra oblique jindal oblique tata , gi elbow 15mm isi marked confirming to is 1239 make ravindra oblique jindal oblique tata , gi tee 15mm comma isi marked confirming to is 1239 make tata oblique jindal oblique ravindra , gi union 15mm comma isi marked confirming to is 1239 make tata oblique jindal oblique ravindra , 15mm bore dia brass bib cock weight not less than 330 gm make ess ess oblique johnson suisse gem oblique prayag , gi pipe 15mm dia comma isi marked make tata oblique jindal oblique ravindra , gi nipple 15mm 3 inch long make tata oblique jindal oblique ravindra , gi plug 15mm make tata oblique jindal oblique ravindra , 15mm dia pvc connection pipe 45 cm long make supreme oblique johnson suisse oblique famingo oblique isi , gi socket reducer 20 to 15mm comma confirming to is 1239 1989 make unique oblique tata oblique jindal , gi pipe 20mm dia med grade confirming to is 1239 make jindal oblique tata oblique

CTN :40706467 Due date: 24 Jun, 202524 Jun, 2025 7.29 Lacs
Tender For construction of a compound around the government junior primary school of holemadhapura village - hom of welding and grinding machine wfdns01, add providing and removing scaffolding at 3 percent on labour wfdns01, painter class i wfdns01, granite/trap broken metal 100 mm and down size lavbd01, coarse sand zone iii lavbd01, add watering charges at 1 percent on material lavbd01, broken stone aggregate 40 mm size lavbd01, broken stone aggregate 20 mm size lavbd01, broken stone aggregate 12 mm to 10 mm size lavbd01, portland cement lavbd01, mixer concrete 1 cum capacity lavbd01, bond stone 20 x 20 x 45 cm lavbd01, tmt bars fe 500 lavbd01, binding wire lavbd01, jungle wood runners and planks lavbd01, silver oak or equivalent planks 38 mm thick lavbd01, mixer concrete small used in culvert wfdns01, casurina poles 100 to 150 mm wfdns01, add handling loading and unloading at 2 percent on material wfdns01, plasticizer super plasticizer wfdns01, add handling loading and unloading at 1 percent on material wfdns01, hom of vibrator 0.71 days wfdns01, welder grade i fdres01, ms flatc, bolts and nutsc, add over head charges 15 percent c, corbon electrodesc, wedler grade ic, hnl add cvc, gst- 5a, display board ciba, miscellaneouscontingencies chargesa, over head & other miscellaneouscharges-arak, add wire brush fine steel wool putty sand paper at 3 percent on cost, mechanic class ii/mechanic hmp grade i/eme grade h, hom of cutting and grinding machinec, ready mix primer paint (ready mix red lead paint) c, add sundries charges at1 % on material hk, ms flat 12x75mm, enamal metal paint nan, rubble stones gc, solid concrete blocks 40 x 15 x 20 cms-4.00 nsqmm matmar50, cast iron arrowsc, expansion boltc, add brush at on 1 percent cost of paint, water proofing cement painthka, add brash putty sand paper at 2 percent on cost of paint, m s square bright bars 20 mm, tools & plants and electrical charges at 2 percent hka, cast iron ornamental designhka

CTN :40465732 Due date: 30 Jun, 202530 Jun, 2025 2.70 Lacs
Tender For corrigendum : the items of the estimate are earth work, cc 1 4 8 concrete for levelling course , cc 1 2 4 concrete for culvert foundation and abutment, rcc 1 2 4 ,20mm aggregate for bed block and parapet ,centering and shuttering , rcc 1 1.5 3 for slab, steel

CTN :40627871 Due date: 18 Jun, 202518 Jun, 2025 37.84 Lacs
Tender For mr-n-24-25- jhajha-01 (kiyajori to jogiyatilha) - kiyajori to jogiyatilha clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 100 m as per technical specification clause 303.1., for 100 m lead @ 80 %, for 100 m lead @ 20 %, construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification clause 405., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of dry lean concrete sub base over a prepared sub grade with coarse and fine aggregate conforming to is 383 , the size of coarse agg. not exceeding 25mm , agg. cememt ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 , cement content not to be less than 150kg/cm, opc to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant , trasported to site, laid with a paver with electronic sensor , compacting with 8-10 tonnes vibrartory roller, finishing and curing., construction of panel concrete ,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per caluse 1501.2.2 m 30(grade) coarse and fine aggregates conforming to is:383, maximum s

State Government

CTN :40691595 Due date: 24 Jun, 202524 Jun, 2025 17.31 Lacs
Tender For supply of material for the work of construction of harvesting structure threshing floor including pucca storage at thiruvettakudy vp in kottucherry commune - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5, hire charges of wall form panel 1250x500 mm, hire charges of 100mm channel shoulder 2.5m long, hire charges of double clip (bridge clip), hire charges of single clip, hire charges of m.s.tube 40mm dia, supply of twisted steel / deformed tmt bars fe-500d, hire charges of flame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of dehradun white lime, supply of welding by electric plant, supply of mild steel tubes hot finished welded type., supply of red oxide zinc chromate primer, supply of galvanised steel j or l hooks 8mm dia, supply of precoated galvanised iron profile sheet 0.5mm tct, supply of mild steel sheets for tanks, supply of structural steel such as tees, angles channels and r.s.joists, supply of iron pintels including welded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer, supply of c.i.pile shoe, supply of m.s.clamps for pile shoe, hire charge for loader including operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuel including operating staff,diesel& lubricant oil etc,complete., hire charge for vibrator(needle type 40mm) including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooper including operating staff,diesel & lubricant oil etc,complete., hire charges of diesel road roller 8 to 10 tonne including operating staff,diesel & lubricant oil etc,complete., hire charge of hydraulic piling rig with power unit etc.,complete accessories and shifitin including operating staff,diesel& lubricant oil etc,complete., hire charge for pumping of concrete-h/c of pump, piping work, & accessories etc including operating staff,diesel& lubricant oil etc,complete., hire charge production cost of concrete by batch mix plant(rolling every layer and top-most layer ) including operating staff,diesel& lubricant oil etc,complete., supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

State Government

CTN :40691596 Due date: 24 Jun, 202524 Jun, 2025 6.67 Lacs
Tender For supply of material for the work of providing and laying cement concrete road kundusamy koil theru at t.r.pattinam (north) vp in t.r.pattinam commune - hire charge for loaderincluding operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuelincluding operating staff,diesel& lubricant oil etc,complete., collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., hire charge for vibrator(needle type 40mm)including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooperincluding operating staff,diesel& lubricant oil etc,complete., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., hire charges wall form panel 1250x500 mm, hire charges 100mm channel shoulder 2.5m long i, hire charges double clip (bridge clip), hire charges single clip, hire charges m.s.tube 40mm dia, collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., hire chargesflame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

CTN :40691865 Due date: 18 Jun, 202518 Jun, 2025 9.63 Crore
Tender For mr-n/24-25 sasaram-02/01 - l068-t05 to panrwa (vr37), clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material(grade 2) : construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., water bound macadam with stone screening gr-ii : providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification clause 405., water bound macadam gr iii : providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.2 to 0.25 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of panel concrete ,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per caluse 1501.2.2 m 30(grade) coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2 cum capasity and appropriate weigh batcher using approved mix design ,laid in approved fixed side formwork (steel channel,laying and fixing of 125 micron thick polythene film,wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continous operation including provision of contraction and expansion ,construction joints, ap

CTN :40691868 Due date: 17 Jun, 202517 Jun, 2025 1.91 Crore
Tender For t04 to nathopur via bisanpur length - 1.561 km - setting out pillars providing & fixing of working benchmark pillars 2 nos. per km & 6 nos. of reference pillars required for 1 km. as per drawings given and direction of e/i, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, dismantling brick/tile workdismantling of existing structures, like culverts, bridge,retaining wall and other structures comprising of brick masonary including unserviceable material and stacking the serviceable material with all lift and lead of 1000m as per technical specification clause 202., dismantling of structuresdismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per technical specification clause 202.a) reinforced cement concrete, removing all types of hume pipe and stacking within a lead of 1000m including earthwork and dismantling of masonary works as per technical specification clause 202.1 .b) above 600 mm to 900 mm dia hume pipe, box cuttingexcavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3, construction of embankment with approved material deposited from road way cutting and excavation from drain and foundation of other structures and excavated with an average lead of 50 m graded and compacted to meet requirement of tables 300.1 and 300.2 as per technical specification clause 301.5 (including royality & labour cess)., construction of embankment with material obtained from borrow pits with a lift upto 1.5 m , transporting to the site spreading , grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m & 100 m as per technical specification clause 301.5 . (including royality & labour cess).for 1000 m lead @ 20 %, for 100 m lead @ 80%, construction of subgrade and earthen shouldersconstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m & 100 m as per technical specification clause 303.1. (including royality & labour cess)., granular sub-base with well graded material (table 400.1)( by mix in place method ) for grading i materialconstruction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means) providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., prime coat (low porosity)providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of

State Government

CTN :40694336 Due date: 19 Jun, 202519 Jun, 2025 25.00 Lacs
Tender For bulding material -concrete pavers block thickness 60mm, accupressor tiles pyramid round & other shapes, cement pp (ppi) , silt free fine sand, silt free cracker drop 2.5mm, aggregate 20mm, pp polypropylene 25mm, 25mm, 30mm, 40mm, 50mm hard murum, color coated profile t, cgl sep 8mm, 10mm, 12mm, 16mm hard murum, color coated profile t, cgl sep 8mm, 10mm, 12mm, 16mm. 0.5mm square pipe 2x2mm square pipe 2x1mm 100-150-200-300 cm granite stone, red sand stone, kota almari stone, lithium ionizing powder atomic 100-150-200-300 cm 2x2 pipe, brass pipe 12x18 (iron pipe), brass pipe 12x12 (iron pipe), ldsp 20 (iron pipe), magenta pipe (iron pipe) etc. j 110 mm (papp supergiant) msiv 75 mm (papp supergiant) j 75 mm (papp supergiant) wcc 1 nct(papp supergiant) jandkantamkadha j 1g1h2 ;pap paijandkantamkaddha msivu. famous 500 kg, 1000 kg, kana lex pipe 1 (ppg), pcr qty 28mm (650 cm3) (ppg), pcr qty 24mm (650 cm3) (ppg), pcr qty 24mm 4x2.5 (850 cm3) (ppg), pcr qty 24mm 3x2 (850 cm3) (ppg), aluminum second 03 tec brown colour, shree magnesium champagne (ppg), shree padmavati champagne (ppg), patanjali bumper (ppg), shree padmavati (ppg), shree magnesium phosphate (ppg), vips champagne (ppg), turpentine (ppg), red oxide (ppg) (jndakantmak)

CTN :40695546 Due date: 23 Jun, 202523 Jun, 2025 47.24 Lacs
Tender For supply of materials for various works in mgnrega - various works under mgnrega, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator(needle type 40 mm), twisted steel/deformed bars, stone aggregate(single size): 40 mm nominal size, m.s. tube 40 mm dia, average rate of mild steel round barsfor reinforcements, quarry waste, red oxide zinc chromate primer, adjustable span eso+si (2.35-3.40), adjustable telescopic prop 3m (2.02-3.75m), wall form panel 1250x450 mm, corner angle 45x45x5 mm 2.50 m long, column clamp 450x1070 mm, prop 2m(2-3.5m), structural steel such as tees,angles,channels and r.s joists
 Loading, Please wait...

Connect us via What's Up