Latest funeral management Tenders | Government funeral management Tenders

CTN :39654187

20 Jun, 2025 NA

Jodhpur - Rajasthan

Tender For corrigendum : supply of upper gastrointestinal video endoscope unit (v2) (q2) mse exemption for years of experience and turnover/ + + no startup exemption for years of experience and turnover/ + + / % / % no document required from seller/ & & / / experience criteria,certificate (requested in atc),oem authorization certificate *in case any bidder is seeking exemption from experience / turnover criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer do you want to show documents uploaded by bidders to all bidders participated in bid?/ no bid to ra enabled/ 1 %1 % 3& 3& 3 3 yes ra qualification rule50% lowest priced technically qualified bidders comprehensive maintenance charges required yes type of bid/ 4 4 two packet bid bid number/ & ( 5 ) : gem/2025/b/5980554 dated/ 3 : 11-03-2025 bid document/ / / 1 / 15 time allowed for technical clarifications during technical evaluation/ = = / ? / ? 3 days inspection required (by empanelled inspection authority / agencies pre- registered with gem) no evaluation method/ = = @ @ total value wise evaluation arbitration clauseno mediation clauseno bid details/ emd detail/ advisory bank/ c bank of baroda emd amount/ 100000 epbg detail/ advisory bank/ c bank of baroda epbg percentage(%)/ 4 (%)3.00 duration of epbg required (months)/ fg ( ). 62 (a). emd exemption: the bidder seeking emd exemption, must submit the valid supporting document for the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods and service providers for services are eligible for exemption from emd. traders are excluded from the purview of this policy./ + h % / 4/ % / % 4 c l 1 m (b). emd & performance security should be in favour of beneficiary, wherever it is applicable./ , , o g p 3 beneficiary/ o o : aiims jodhpur jodhpur, department of health and family welfare, all india institute of medical sciences (aiims), ministry of health and family welfare (aiims) mii purchase preference/ mii purchase preference/ no details of the competent authority for mii 2 / 15 name of competent authoritysher bahadur designation of competent authorityunder secretary office / department / division of competent authority procurement policy division, department of expenditure, ministry of finance ca approval numberno. f. 4/1/2023-ppd (pt.) competent authority approval date28-06-2024 brief description of the approval granted by competent authority relaxation for procurement of certain items through global tender enquiry - sl. no. 158 in the abovementioned order competent authority approval for not opting make in india preference : view document mse purchase preference/ mse purchase preference/ yes 1. purchase preference will be given to mses having valid udyam registration and whose credentials are validated online through udyam registration portal as defined in public procurement policy for micro and small enterprises (mses) order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises and its subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of the purchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders are excluded from the purview of public procurement policy for micro and small enterprises and hence resellers offering products manufactured by some other oem are not eligible for any purchase preference. in respect of bid for services, the bidder must be the service provider of the offered service. relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decide eligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 is not an mse and mse seller (s) has / have quoted price within l-1+ 15% (selected by buyer) of margin of purchase preference /price band defined

State Government

CTN :40405621

26 Jun, 2025 8.96 Lacs

Kutch - Gujarat

Tender For corrigendum : providing of repair and overhauling service - fabrication and erection for idct # 3 hot water pipeline supporting structure at plant kltps.

CTN :40609216

13 Jun, 2025 52

Multi City - Karnataka

Tender For service work approved in the 15th financial plan for the year 2024-25 includes repair and maintenance of drinking water motor including sc/st and all other streets of all villages under kunkova gram panchayat. - winding wire-mr-allgps-, motor lb bush-mr-allgps-, planz 10 by 4 -mr-allgps-, planz 8 by 4-mr-allgps-, stud bolt-mr-allgps-, rotary sleave-mr-allgps-, chavigal-mr-allgps-, cuppler-mr-allgps-, trust bearing-mr-allgps-, trust pad-mr-allgps-mr-allgps-, chavi-mr-allgps-mr-allgps-, oil seal-mr-allgps-mr-allgps-, shan gourd-mr-allgps-, bady surclip-mr-allgps-, tp surclip-mr-allgps-, mm 8 and 10mm nuts-mr-allgps-, base bottom gund-mr-allgps-, motor base-mr-allgps-, motor housing-mr-allgps-, motor adapter-mr-allgps-, cuppler sim-mr-allgps-, motor lifting and eraction charges-mr-allgps-, pump repair charges with meterials-mr-allgps-, cable 3 mtr 2point 5mm-mr-allgps-, cable 3 mtr 4 point 5mm-mr-allgps-, lathe work fitting charges-mr-allgps-, water nut-mr-allgps-, start repair and bled kit asembly-mr-allgps-, rewinding of submergible pumpset with copper winding wires of appropriate guage as per specifications and or directions of the departmental officials including all materials labour equipment and testing for all types of submergible pumpsets etc with guarantee period not less than 6 months for for all types of submergible pumpsets 10 hp-mr-allgps-, all types of rewinding of submergible pumpsetof 6hp-mr-allgps-, all types of rewinding of submergible pumpset 5hp-mr-allgps-, all types of rewinding of submergible pumpset 4hp-mr-allgps-, all types of rewinding of submergible pumpset 3hp-mr-allgps-, replace the components of submergible pump sets requiring replacements decided by the departmental officials with respective make of damaged ones including all materials labour equipments and testing etc with gurantee of period not less than 1 year for the pump coupling stainless steel-mr-allgps-, the discharge outlet do bearing do steel bush do bearing-mr-allgps-, the intermediate piece ip with ip leaded bronze brush-mr-allgps-, the oil seal and steel bush-mr-allgps-, the impeller shell moulded with aluminium and bronze-mr-allgps-, replace the components of motor parts of submergible pump sets items requiring replacements decided by the departmental officials with respective make of damaged ones including all materials labour equipments and testing etc and wtih guarantee warranty for one year for the lifting of submergible pumpset from well-mr-allgps-, the gun metal bearing centrifugally cast aluminium bronze bearing brush-mr-allgps-, the stator of motor 4 to 5 h p-mr-allgps-, the stud and nuts-mr-allgps-, supplying ball bearing as per isi specifiction with guarantee period of not less than 12 month bearing cost for 6 hp mr-allgps-, supply and delivery at site delivery of best indigenous brand new mcbminiature circuit breakers of required capacity as per is 88228 by1978and its latest amendments and with isi mark of 6 by 10by 16by20by25by40 ampswith scalable box-mr-allgps-, supply and delivery at site best indigenous brand new power capacitor as per is 2834 by1986 with latest amendments with kptcl authorities and erection electrification and comm missioning of the same at the location of pective pump sets-mr-allgps-, labour charges for erection electrification and commissioning of pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps cable clips and water tight gland cable protectors bolts nuts valve and gauges tools and equipments etc involved in the job as per specifications with necessary tests as per specifications with testing of as per instructions of engineer incharge of work-mr-allgps-, supply and delivery at site brand new best make pvc insulated cable of flat 3 core sheathed of nominal cross sectional area as per is 694 by1990 with isi mark and as per its latest amendments-mr-allgps-, labour charges for erection electrification and commissioning

State Government

CTN :40569479

23 Jun, 2025 NA

Gandhinagar - Gujarat

Tender For supply of video conferencing camera / web camera (v2) (q2) years of past experience required for same/similar service/ * * // /0 /0 % % 3 year (s) mse exemption for years of experience/ 2 2 // and turnover// % % 5 65 6 yes startup exemption for years of experience/ 2 2 7 % 7 % // and turnover/ / % % 7 % 7 % 5 65 6 yes document required from seller/ & & 7 7 experience criteria,certificate (requested in atc),oem authorization certificate,additional doc 1 (requested in atc),compliance of boq specification and supporting document *in case any bidder is seeking exemption from experience / turnover criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer do you want to show documents uploaded by bidders to all bidders participated in bid?/ no bid to ra enabled/ 9 %9 % ;& ;& ; ; yes bid number/ & ( < ) : gem/2025/b/6240471 dated/ ; : 02-06-2025 bid document/ 7 7 1 / 9 ra qualification ruleh1-highest priced bid elimination type of bid/ 5 5 two packet bid time allowed for technical clarifications during technical evaluation/ c c 7 e 7 e 2 days inspection required (by empanelled inspection authority / agencies pre- registered with gem) no evaluation method/ c c f f total value wise evaluation arbitration clauseno mediation clauseno bid details/ emd detail/ advisory bank/ h state bank of india emd amount/ 12250 epbg detail/ advisory bank/ h state bank of india epbg percentage(%)/ 5 (%)5.00 duration of epbg required (months)/ /0 ( ). 38 (a). emd exemption: the bidder seeking emd exemption, must submit the valid supporting document for the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods and service providers for services are eligible for exemption from emd. traders are excluded from the purview of this policy./ 2 k % 7 57 % 7 % 5 h n 9 o (b). emd & performance securityshould be in favour of beneficiary, wherever it is applicable./ , , q 0 r ; beneficiary/ q q : - gandhinagar, home department gujarat, n/a, (choksi maheshkumar) mse purchase preference/ mse purchase preference/ no 2 / 9 mii purchase preference/ mii purchase preference/ no 1. if the bidder is a micro or small enterprise as per latest orders issued by ministry of msme, the bidder shall be exempted from the eligibility criteria of "experience criteria" as defined above subject to meeting of quality and technical specifications. the bidder seeking exemption from experience criteria, shall upload the supporting documents to prove his eligibility for exemption. 2. if the bidder is a micro or small enterprise (mse) as per latest orders issued by ministry of msme, the bidder shall be exempted from the eligibility criteria of "bidder turnover" as defined above subject to meeting of quality and technical specifications. if the bidder itself is mse oem of the offered products, it would be exempted from the "

Central Government/Public Sector

CTN :40556488

21 Jun, 2025 NA

East Singhbhum - Jharkhand

Tender For providing of facility management services - lumpsum based - commercial; annual contract for providing supporting facilities for conservancy services at moubhandar township of icc for a period of one (01) year; consumables to be provided by service provider (inclu..

CTN :40557136

20 Jun, 2025 NA

Jodhpur - Rajasthan

Tender For supply of fuel feed pump , drive shaft , cam plate , injector service kit , supporting plate , roller

CTN :40541729

19 Jun, 2025 NA

Jamnagar - Gujarat

Tender For supply of furniture for laboratory - raw water (flexible tubing service valves for benchtop aeolus fumehood) (rhs) , compressed air (flexible tubing service valves for benchtop aeolus fumehood) (rhs) , nitrogen (flexible tubing service valves for benchtop aeolus fumehood) (rhs) , ceiling panel , ceiling front cover panel for 5 feet aeolus fumehood , ceiling lh/ rh side cover panel for aeolus fumehood , understorage , fixed type apparatus storage cabinet for bench top enhanced fume hood (750 width) , rear support panel offixed type apparatus storage cabinet for benchtop aeolus fumehood , supply and installation of laboratory exhaust including supporting structures/hardwares including delivery, unloading the consignment and transporting it from the place of storage to the installation site, removal of debris, dirt and rubbish accumulated as a result of installation/commissioning of the same for analytical lab as per direction of engineer in charge : - , centrifugal blower & accessories , centrifugal fan with housing in pp construction & suitable stand in ms zinc plating with powder coating. inlet/outlet dia: 350mm. impeller dia: 400mm. non flp motor: 2 hp 1400 rpm. minimum cfm: 1000 @ 50 wcmm static pressure. motor make : ie2 (non flp), crompton greaves/bharat bijlee or equivalent. db level: 75. motor description: ip55, 3 phase, 440 volt , 50 hz. weather cover for motor. anti-vibration pads & m10x100 pin type anchor fasteners , blower weather cowl (frp outlet) & ms stack support with required clamps , 10 (250mm) 100% injection molded pp damper with two side flange , pp/frp ducting & accessories for fume hood & spot extractor exhaust , design, supply & installation of pp-frp ducting of wall thickness 3mm ppgl + 3mm frp for sizes up to 500mm dia, above 501mm dia 4mm ppgl + 4 mm frp shall be used unless otherwise specified. including clamps, hanging support, all hardwares required to complete ducting work. , ducting upto 500mm dia - wall thickness shall be 3 mm for pp and frp.

CTN :40545171

09 Jun, 2025 NA

Gandhinagar - Gujarat

Tender For supply of sofas (v2) (q3) years of past experience required for same/similar service/ * * // /0 /0 % % 2 year (s) mse exemption for years of experience and turnover/ 2 2 no startup exemption for years of experience and turnover/ 2 2 5 % 5 % no document required from seller/ & & 5 5 experience criteria,past performance,bidder turnover,certificate (requested in atc),oem authorization certificate,oem annual turnover,additional doc 1 (requested in atc),compliance of boq specification and supporting document *in case any bidder is seeking exemption from experience / turnover criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer do you want to show documents uploaded by bidders to all bidders participated in bid?/ no past performance/ 7 % 7 % 40 % bid to ra enabled/ 8 %8 % :& :& : : yes bid number/ & ( ; ) : gem/2025/b/6287275 dated/ : : 30-05-2025 bid document/ 5 5 1 / 10 ra qualification ruleh1-highest priced bid elimination type of bid/ 7 7 two packet bid time allowed for technical clarifications during technical evaluation/ b b 5 d 5 d 2 days inspection required (by empanelled inspection authority / agencies pre- registered with gem) no estimated bid value/ b b inr 300000 evaluation method/ b b e e total value wise evaluation arbitration clauseno mediation clauseno bid details/ emd detail/ required/ g no epbg detail/ advisory bank/ j state bank of india epbg percentage(%)/ 7 (%)5.00 duration of epbg required (months)/ /0 ( ). 15 (a). emd & performance securityshould be in favour of beneficiary, wherever it is applicable./ , , n 0 o : beneficiary/ n n : director general and inspector general of police, gujarat state director general and inspector general of police, (planning & modernization division), police bhavan, first floor, sector-18, gujarat state, gandhinagar-382007. (director general and inspector general of police, gujarat state) mii purchase preference/ mii purchase preference/ yes mse purchase preference/ 2 / 10 mse purchase preference/ yes 1. experience criteria: in respect of the filter applied for experience criteria, the bidder or its oem of the product offered in the bid {themselves or through reseller(s)} should have regularly, manufactured and supplied same or similar category products to any central / state govt organization / psu for number of financial years as indicated above in the bid document before the bid opening date. copies of relevant contracts and delivery acceptance certificates like crac to be submitted along with bid in support of having supplied some quantity during each of the financial year. in case of bunch bids, the category of primary product having highest value should meet this criterion. 2. preference to make in india products (for bids < 200 crore):preference shall be given to class 1 local supplier as defined in public procurement (preference to make in india), order 2017 as amended from time to time and its subsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimum local content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail the purchase preference, the bidder must upload a certificate from the oem regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid, failing which no purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relating to percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a company and by a practicing cost accountant or a chartered accountant for oems other than companies as per the public procurement (preference to make-in -india) order 2017 dated 04.06.2020. only class-i and class-ii local suppliers as per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated

CTN :40545203

09 Jun, 2025 NA

Gandhinagar - Gujarat

Tender For supply of executive table (v3) (q2) years of past experience required for same/similar service/ * * // /0 /0 % % 2 year (s) mse exemption for years of experience and turnover/ 2 2 no startup exemption for years of experience and turnover/ 2 2 5 % 5 % no document required from seller/ & & 5 5 experience criteria,past performance,bidder turnover,certificate (requested in atc),oem authorization certificate,oem annual turnover,additional doc 1 (requested in atc),compliance of boq specification and supporting document *in case any bidder is seeking exemption from experience / turnover criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer do you want to show documents uploaded by bidders to all bidders participated in bid?/ no past performance/ 7 % 7 % 40 % bid to ra enabled/ 8 %8 % :& :& : : yes bid number/ & ( ; ) : gem/2025/b/6287672 dated/ : : 30-05-2025 bid document/ 5 5 1 / 11 ra qualification ruleh1-highest priced bid elimination type of bid/ 7 7 two packet bid primary product categoryexecutive table (v3) time allowed for technical clarifications during technical evaluation/ b b 5 d 5 d 2 days inspection required (by empanelled inspection authority / agencies pre- registered with gem) no estimated bid value/ b b inr 7050000 evaluation method/ b b e e total value wise evaluation arbitration clauseno mediation clauseno bid details/ emd detail/ advisory bank/ g state bank of india emd amount/ 211500 epbg detail/ advisory bank/ g state bank of india epbg percentage(%)/ 7 (%)5.00 duration of epbg required (months)/ /0 ( ). 15 (a). emd exemption: the bidder seeking emd exemption, must submit the valid supporting document for the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods and service providers for services are eligible for exemption from emd. traders are excluded from the purview of this policy./ 2 j % 5 75 % 5 % 7 g m 8 n (b). emd & performance securityshould be in favour of beneficiary, wherever it is applicable./ , , p 0 q : beneficiary/ p p : director general and inspector general of police, gujarat state office of the dg & ig of police, gujarat state, 1st floor, police bhavan, sector-18, gandhinagar 382007 (director general and inspector general of police, gujarat state) 2 / 11 mii purchase preference/ mii purchase preference/ yes mse purchase preference/ mse purchase preference/ yes 1. experience criteria: in respect of the filter applied for experience criteria, the bidder or its oem of the product offered in the bid {themselves or through reseller(s)} should have regularly, manufactured and supplied same or similar category products to any central / state govt organization / psu for number of financial years as indicated above in the bid document before the bid opening date. copies of relevant contracts and delivery acceptance certificates like crac to be submitted along with bid in support of having supplied some quantity during each of the financial year. in case of bunch bids, the category of primary product having highest value should meet this criterion. 2. preference to make in india products (for bids < 200 crore):preference shall be given to class 1 local supplier as defined in public procurement (preference to make in india), order 2017 as amended from time to time and its subsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimum local content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail the purchase preference, the bidder must upload a certificate from the oem regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid, failing which no purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relating to percentage of local content shall be certifi

State Government

CTN :40494100

11 Jun, 2025 4.10 Crore

Gandhinagar - Gujarat

Tender For supply of non linear junction detector as per (mha) qrs (q3) years of past experience required for same/similar service/ * * // /0 /0 % % 3 year (s) mse exemption for years of experience and turnover/ 2 2 no startup exemption for years of experience and turnover/ 2 2 5 % 5 % no document required from seller/ & & 5 5 experience criteria,past performance,bidder turnover,certificate (requested in atc),oem authorization certificate,oem annual turnover,additional doc 1 (requested in atc) *in case any bidder is seeking exemption from experience / turnover criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer do you want to show documents uploaded by bidders to all bidders participated in bid?/ no past performance/ 7 % 7 % 50 % bid to ra enabled/ 8 %8 % :& :& : : yes bid number/ & ( ; ) : gem/2025/b/6266314 dated/ : : 27-05-2025 bid document/ 5 5 1 / 9 ra qualification ruleh1-highest priced bid elimination type of bid/ 7 7 two packet bid time allowed for technical clarifications during technical evaluation/ b b 5 d 5 d 2 days inspection required (by empanelled inspection authority / agencies pre- registered with gem) no estimated bid value/ b b 41000000 evaluation method/ b b e e total value wise evaluation arbitration clauseno mediation clauseno bid details/ emd detail/ advisory bank/ g state bank of india emd amount/ 1230000 epbg detail/ advisory bank/ g state bank of india epbg percentage(%)/ 7 (%)5.00 duration of epbg required (months)/ /0 ( ). 40 (a). emd exemption: the bidder seeking emd exemption, must submit the valid supporting document for the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods and service providers for services are eligible for exemption from emd. traders are excluded from the purview of this policy./ 2 j % 5 75 % 5 % 7 g m 8 n (b). emd & performance security should be in favour of beneficiary, wherever it is applicable./ , , p 0 q : beneficiary/ p p : dy.s.p. office of the director general of police, intelligence, g.s., gandhinagar, home department gujarat, n/a, (assistant commissioner of intelligence) mii purchase preference/ 2 / 9 mii purchase preference/ yes mse purchase preference/ mse purchase preference/ yes 1. experience criteria: in respect of the filter applied for experience criteria, the bidder or its oem of the product offered in the bid {themselves or through reseller(s)} should have regularly, manufactured and supplied same or similar category products to any central / state govt organization / psu for number of financial years as indicated above in the bid document before the bid opening date. copies of relevant contracts and delivery acceptance certificates like crac to be submitted along with bid in support of having supplied some quantity during each of the financial year. in case of bunch bids, the category of primary product having highest value should meet this criterion. 2. preference to make in india products (for bids < 200 crore):preference shall be given to class 1 local supplier as defined in public procurement (preference to make in india), order 2017 as amended from time to time and its subsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimum local content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail the purchase preference, the bidder must upload a certificate from the oem regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid, failing which no purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relating to percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a company and by a practicing cost accountant or a chartered accountant for oems other than companies as

Funeral Management Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government